Avaya IP Telephone Power Adapter Installation Guide

The enclosed device is used to allow the Avaya™ IP 4620 and IP 4602SW Telephones to be recognized and powered by Catalyst® power blades.

INSTALLATION:

INSTALLATION:INSTALLATION: Proper installation is necessary to ensure the unit operates correctly.

1. Set the switch on the bottom of the IPTPA as follows:

Catalyst® 6509 Catalyst® 4006 IP 4602, IP 4602SW 1 3

IP 4620 1 2

2. Attach an RJ45-8 CAT 5 compliant cord (supplied with the IP 4600 Telephone) from the wall jack to the IP Telephone Power Adapter at the “LINE” side.

3. Attach the RJ45-8 CAT 5 compliant pigtail on the IP Telephone Power Adapter to the telephone line input jack.

NOTE:

NOTE:NOTE: Catalyst® is a registered trademark of Cisco Systems, Inc.

CAUTION:

CAUTION:CAUTION: This unit is not repairable. Do not attempt to open or service this device.

Installation Guide for the

Installation Guide for theInstallation Guide for the

Avaya™ IP Telephone Power Adapter

Avaya™ IP Telephone Power AdapterAvaya™ IP Telephone Power Adapter

Comcode 700276611

August 2003

Figure 1 – Adapter Switch