ZenFone 3 Max
User Guide
E12086
15060-xxxxxxxx
Revised Edition V3 / September 2016
Model: ASUS_X008D/ASUS_X008DA/ASUS_X008DB/
ASUS_X008DC
Before you start, ensure that you have read all the
safety information and operating instructions in this
User Guide to prevent injury or damage to your
device.
NOTE:
For the latest updates and more detailed
inf or mati on, pleas e vi sit
www.asus.com.
Front features
Proximity sensor
Receiver
Front
camera
LED indicator
Touch screen
display
Side features
Audio jack
Nano SIM /
micro SIM
card slot
Eject
hole
Volume
key
Power
key
Microphone
Micro USB port
Rear features
Flash
Rear camera
Fingerprint
sensor
NOTES:
•
The Nano SIM / micro SIM card slots support
GSM, WCDMA, FDD-LTE, and TDD-LTE
network bands.
•
The microSD card slot supports microSD and
mi croSD XC car d formats.
Charging your ASUS Phone
To charge your ASUS Phone:
1.
Connect the USB connector into the power
adapter’s USB port.
2.
Connect the other end of the USB cable to your
ASUS Phone.
3.
Plug the power adapter into a wall socket.
IMPORTANT!
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the USB cable to
your computer’s USB port.
•
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
•
Use the ASUS 18W/10W power adapter and ASUS
USB cable to get the best charge experience when
your ASUS Phone is in sleep mode.
•
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the USB cable is +9V 2A, 18W / +5V 2A, 10W.
3
2
1
Installing a Nano SIM/ micro SIM /
micr o SD card
To install a Nano SIM/ micro SIM/ microSD card:
1. Push the bundled
eject pin into the hole
on the card slot to
eject the tray out.
2. Insert the Nano SIM, micro SIM, or microSD
card into the appropriate slot.
Micro-SIM1
Micro-SIM1
Micro SD
3. Push the tray to
close it.
IMPORTANT!
Both SIM card slots support 4G / 3G / 2G
network band. But only one SIM card can connect to 4G
service at a time.
CAUTION!
•
Do not use sharp tools or solvent on your device to
avoid scratches on it.
•
Use only a standard Micro SIM or Nano SIM card
on your ASUS Phone.
• For m or e r egul at or y infor m ati on a nd E-labels,
check on your device from Settings >About >
Regulatory Information.
Loading...