Asus P7P55D-E User Manual

P7P55D-E Deluxe

Motherboard

E5133

First Edition November 2009

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.

Contents

Notices viii

Safety information ...................................................................................................... ix

About this guide .......................................................................................................... x

P7P55D-E Deluxe specications summary ............................................................ xii

Chapter 1: Product introduction

1.1 Welcome! ....................................................................................................1-1

1.2 Package contents.......................................................................................1-1

1.3 Special features..........................................................................................1-2

1.3.1 Product highlights........................................................................1-2

1.3.2 ASUS Xtreme Design—Hybrid Processor ..................................1-3

1.3.3 ASUS Xtreme Design—24 Hybrid Phase ...................................1-3

1.3.4 ASUS Xtreme Design—Hybrid OS .............................................1-3

1.3.5 ASUS Exclusive Features ........................................................... 1-4

Chapter 2: Hardware information

2.1 Before you proceed ...................................................................................2-1

2.2 Motherboard overview ............................................................................... 2-2

2.2.1 Motherboard layout ..................................................................... 2-2

2.2.2 Layout contents ...........................................................................2-3

2.2.3 Placement direction.....................................................................2-4

2.2.4 Screw holes.................................................................................2-4

2.3 Central Processing Unit (CPU) .................................................................2-5

2.3.1 Installing the CPU .......................................................................2-5

2.3.2 Installing the CPU heatsink and fan ............................................ 2-8

2.3.3 Uninstalling the CPU heatsink and fan........................................2-9

2.4 System memory .......................................................................................2-10

2.4.1 Overview ................................................................................... 2-10

2.4.2 Memory congurations .............................................................. 2-11

2.4.3 Installing a DIMM ......................................................................2-20

2.4.4 Removing a DIMM ....................................................................2-20

2.5 Expansion slots........................................................................................2-21

2.5.1 Installing an expansion card......................................................2-21

2.5.2 Conguring an expansion card .................................................2-21

2.5.3 Interrupt assignments................................................................2-22

2.5.4 PCI slots ....................................................................................2-23

2.5.5 PCI Express 2.0 x1 slots ........................................................... 2-23

2.5.6 PCI Express 2.0 x16 slots ......................................................... 2-23

2.6 Onboard switches .................................................................................... 2-25

iii

Contents

2.7 Connectors ...............................................................................................2-28

2.7.1 Rear panel connectors .............................................................. 2-28

2.7.2 Audio I/O connections ............................................................... 2-29

2.7.3 Internal connectors....................................................................2-32

2.7.4. ASUS Q-Connector (system panel) ..........................................2-42

2.8 Onboard LEDs .......................................................................................... 2-43

2.9 Starting up for the rst time .................................................................... 2-44

2.10 Turning off the computer ......................................................................... 2-44

Chapter 3: BIOS setup

3.1 Knowing BIOS ............................................................................................3-1

3.2 Updating BIOS ............................................................................................ 3-1

3.2.1 ASUS Update utility.....................................................................3-2

3.2.2 ASUS EZ Flash 2 utility ............................................................... 3-4

3.2.3 ASUS CrashFree BIOS 3 utility...................................................3-5

3.2.4 ASUS BIOS Updater ................................................................... 3-6

3.3 BIOS setup program ..................................................................................3-9

3.3.1 BIOS menu screen ...................................................................... 3-9

3.3.2 Menu bar ..................................................................................... 3-9

3.3.3 Navigation keys ......................................................................... 3-10

3.3.4 Menu items................................................................................3-10

3.3.5 Submenu items ......................................................................... 3-10

3.3.6 Conguration elds ...................................................................3-10

3.3.7 Pop-up window..........................................................................3-10

3.3.8 Scroll bar ................................................................................... 3-10

3.3.9 General help..............................................................................3-10

3.4 Main menu ................................................................................................3-11

3.4.1 SATA 1–6 .................................................................................. 3-11

3.4.2 Storage Conguration ............................................................... 3-13

3.4.3 AHCI Conguration ................................................................... 3-13

3.4.4 System Information ................................................................... 3-14

3.5 Ai Tweaker menu ...................................................................................... 3-15

3.5.1 CPU Level Up ..........................................................................3-15

3.5.2 Ai Overclock Tuner ................................................................... 3-16

3.5.3 CPU Ratio Setting .................................................................... 3-17

3.5.4 Intel(R) SpeedStep(TM) Tech .................................................. 3-17

3.5.5 Intel(R) TurboMode Tech .......................................................... 3-17

3.5.6 Xtreme Phase Full Power Mode ..............................................3-17

3.5.7 DRAM Frequency .....................................................................3-17

Contents

3.5.8 QPI Frequency ......................................................................... 3-18

3.5.9 ASUS/3rd Party Ui Priority ........................................................ 3-18

3.5.10 OC Tuner...................................................................................3-18

3.5.11 Start auto tuning ........................................................................ 3-18

3.5.12 DRAM Timing Control ...............................................................3-18

3.5.13 CPU Differential Amplitude ........................................................ 3-20

3.5.14 CPU Clock Skew ...................................................................... 3-20

3.5.15 CPU Voltage Mode....................................................................3-20

3.5.16 IMC Voltage...............................................................................3-21

3.5.17 DRAM Voltage...........................................................................3-21

3.5.18 CPU PLL Voltage ......................................................................3-21

3.5.19 PCH Voltage .............................................................................3-21

3.5.20 DRAM DATA REF Voltage on CHA/B ......................................3-22

3.5.21 DRAM CTRL REF Voltage on CHA/B ...................................... 3-22

3.5.22 Load-Line Calibration ............................................................... 3-22

3.5.23 CPU Spread Spectrum .............................................................3-22

3.5.24 PCIE Spread Spectrum ............................................................ 3-22

3.6 Advanced menu .......................................................................................3-23

3.6.1 CPU Conguration .................................................................... 3-23

3.6.2 Uncore Conguration ................................................................ 3-25

3.6.3 Onboard Devices Conguration ................................................ 3-26

3.6.4 USB Conguration ....................................................................3-27

3.6.5 PCIPnP .....................................................................................3-28

3.6.6 Intel VT-d .................................................................................. 3-28

3.6.7 T.Probe ..................................................................................... 3-28

3.7 Power menu .............................................................................................. 3-29

3.7.1 Suspend Mode ......................................................................... 3-29

3.7.2 Repost Video on S3 Resume .................................................... 3-29

3.7.3 ACPI 2.0 Support ...................................................................... 3-29

3.7.4 ACPI APIC Support .................................................................. 3-29

3.7.5 EuP Ready ............................................................................... 3-29

3.7.6 APM Conguration .................................................................... 3-30

3.7.7 Hardware Monitor......................................................................3-31

3.8 Boot menu ................................................................................................3-33

3.8.1 Boot Device Priority...................................................................3-33

3.8.2 Boot Settings Conguration ......................................................3-34

3.8.3 Security ..................................................................................... 3-35

3.9 Tools menu ............................................................................................... 3-37

Contents

3.9.1 ASUS O.C. Prole ..................................................................... 3-37

3.9.2 AI NET 2 .................................................................................... 3-38

3.9.3 ASUS EZ Flash 2 ...................................................................... 3-38

3.9.4 Express Gate ...........................................................................3-39

3.9.5 ID LED ......................................................................................3-39

3.10 Exit menu .................................................................................................. 3-40

Chapter 4: Software support

4.1 Installing an operating system .................................................................4-1

4.2 Support DVD information .......................................................................... 4-1

4.2.1 Running the support DVD ........................................................... 4-1

4.2.2 Obtaining the software manuals..................................................4-2

4.3 Software information .................................................................................4-3

4.3.1 ASUS PC Probe II ....................................................................... 4-3

4.3.2 ASUS AI Suite ............................................................................. 4-4

4.3.3 ASUS Fan Xpert..........................................................................4-5

4.3.4 ASUS EPU-6 Engine...................................................................4-6

4.3.5 ASUS Express Gate....................................................................4-7

4.3.6 ASUS T.Probe ............................................................................. 4-8

4.3.7 VIA® High Denition Audio utility ................................................. 4-9

4.3.8 Intel® Extreme Tuning Utility ...................................................... 4-10

4.4 RAID congurations ................................................................................4-11

4.4.1 RAID denitions ........................................................................ 4-11

4.4.2 Installing Serial ATA hard disks .................................................4-12

4.4.3 Setting the RAID item in BIOS .................................................. 4-12

4.4.4 Intel® Matrix Storage Manager option ROM utility ..................... 4-12

4.5 Creating a RAID driver disk.....................................................................4-16

4.5.1 Creating a RAID driver disk without entering the OS ................ 4-16

4.5.2 Creating a RAID driver disk in Windows® .................................. 4-16

4.5.3 Installing the RAID driver during Windows® OS installation ...... 4-17

4.5.4 Using a USB oppy disk drive ................................................... 4-17

Chapter 5: Multiple GPU technology support

5.1 ATI® CrossFireX™ technology ..................................................................5-1

5.1.1 Requirements .............................................................................. 5-1

5.1.2 Before you begin ......................................................................... 5-1

5.1.3 Installing two CrossFireX™ graphics cards ................................5-1

5.1.4 Installing the device drivers ......................................................... 5-2

5.1.5 Enabling the ATI® CrossFireX™ technology ...............................5-3

Contents

5.2 NVIDIA® SLI™ technology ......................................................................... 5-4

5.2.1 Requirements .............................................................................. 5-4

5.2.2 Installing two SLI-ready graphics cards ......................................5-4

5.2.3 Installing the device drivers ......................................................... 5-5

5.2.4 Enabling the NVIDIA® SLI™ technology ..................................... 5-5

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required

to assure compliance with FCC regulations. Changes or modications to this unit not

expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm.

DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

viii

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet

before relocating the system.

• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

• Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied service

technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

• Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied service

technician or your retailer.

About this guide

This user guide contains the information you need when installing and conguring the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the switches, jumpers, and connectors on the motherboard.

• Chapter 3: BIOS setup

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

• Chapter 4: Software support

This chapter describes the contents of the support DVD that comes with the motherboard package and the software.

• Chapter 5: Multiple GPU technology support

This chapter describes how to install and congure multiple ATI® CrossFireX™ and

NVIDIA® SLI™ graphics cards.

Where to nd more information

Refer to the following sources for additional information and for product and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty yers,

that may have been added by your dealer. These documents are not part of the standard package.

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying to

complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Typography

Bold text Indicates a menu or an item to select.

Italic

s Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or Return key.Return key.

<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key

names are linked with a plus sign (+).

Example: <Ctrl> + <Alt> + <Del>

P7P55D-E Deluxe specications summary

CPU LGA1156 socket for Intel® Core™ i7 / Core™ i5 / Core™ i3

Chipset Intel® P55 Express Chipset

Memory 4 x DIMM, max. 16GB, DDR3 2200(O.C.)* / 1600 / 1333 /

Expansion Slots 2 x PCI Express 2.0 x16 slots (single at x16 or dual at x8 / x8

Multi-GPU Support Supports ATI® Quad-GPU CrossFireX™ Technology

Storage Intel® P55 Express Chipset:

LAN Dual Gigabit LAN controllers

USB NEC USB 3.0 controller:

IEEE 1394 VIA® VT6308P controller supports 2 x IEEE 1394a ports

Audio VIA® VT2020 10-channel High Denition Audio CODEC

processors Supports Intel® Turbo Boost Technology * Refer to www.asus.com for Intel CPU support list

1066 MHz, non-ECC, un-buffered memory Dual channel memory architecture Supports Intel® Extreme Memory Prole (XMP) * Hyper DIMM support is subject to the physical characteristics of individual CPUs. Some hyper DIMMs only support one DIMM per channel. Please refer to Memory QVL for details. ** Refer to www.asus.com or this user manual for the

Memory QVL (Qualied Vendors Lists)

mode) 3 x PCI Express 2.0 x1 slots (2 at 5.0GT/s [blue]; 1 at 2.5GT/s [gray]) 2 x PCI slots

Supports NVIDIA® Quad-GPU SLI™ Technology

- 6 x SATA 3.0 Gb/s ports

- Intel® Matrix Storage supporting SATA RAID 0,1, 5, and 10

JMicron® JMB363 SATA & PATA controller:

- 1 x Ultra DMA 133/100/66 for up to 2 PATA devices

- 1 x SATA 3.0 Gb/s port (black)

- 1 x External SATA port

Marvell® PCIe SATA 6Gb/s controller:

- 2 x SATA 6.0 Gb/s ports (gray)

- 2 x Realtek® 8112L Gigabit LAN controller featuring AI NET2

- 2 x USB 3.0 ports (blue; at back panel)

Intel® P55 Express Chipset:

- 12 x USB 2.0 ports (6 ports at mid-board, 6 ports at back panel)

(one at midboard; one at back panel)

- Absolute Pitch BD192/24 featuring ENVY HD

- BD Audio Layer Content Protection

- DTS Surround Sensation Ultra-PC

- Supports Jack-Detection, Multi-streaming and Front Panel Jack-Retasking

- Coaxial / Optical S/PDIF out ports at back I/O

- ASUS Noise Filter

(continued on the next page)

xii

P7P55D-E Deluxe specications summary

ASUS Unique Features Unique PCIe x4 Bridge Chip for Ultra Performance:

ASUS Q-Design ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED)

ASUS Exclusive Overclocking Features

- True USB 3.0 Support

- True SATA 6.0Gb/s Support

ASUS Xtreme Design—Hybrid Series:

ASUS Hybrid Processor—TurboV EVO

- Auto Tuning, TurboV, CPU Level Up and Turbo Key

- ASUS TurboV Remote

ASUS 24 Hybrid Phase*

- T.Probe Technology for Active Cooling

- 16+3 Phase Power Design * 24 Hybrid Phase = 16+3 Phase x T.Probe

ASUS Hybrid OS—Express Gate

ASUS Exclusive Features:

- MemOK!

- ASUS EPU

ASUS Quiet Thermal Solution:

- ASUS Fanless Design: Heat-pipe solution

- ASUS Fanless Design: Stack Cool 3+

- ASUS Fan Xpert

ASUS EZ DIY:

- ASUS Q-Shield

- ASUS Q-Connector

- ASUS O.C. Prole

- ASUS CrashFree BIOS 3

- ASUS EZ Flash 2

- ASUS My Logo 2

- Multi-language BIOS

ASUS Q-Slot ASUS Q-DIMM

Precision Tweaker 2:

- vCore: Adjustable CPU voltage at 0.00625V increment

- vIMC: Adjustable IMC voltage at 0.00625V increment

- vDRAM Bus: 81-step DRAM bus voltage control

- vPCH: 2-step chipset voltage control

- vCPU_PLL: 4-step reference voltage control

SFS (Stepless Frequency Selection):

- Internal Base Clock tuning from 80MHz up to 500 MHz at 1MHz increment

- PCI Express frequency tuning from 100MHz up to 200MHz at 1MHz increment

Overclocking Protection:

- ASUS C.P.R.(CPU Parameter Recall)

(continued on the next page)

xiii

P7P55D-E Deluxe specications summary

Back Panel I/O Ports 1 x PS/2 Keyboard port (purple)

Internal I/O Connectors 3 x USB connectors support additional 6 USB ports

BIOS Features 16 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0,

Manageability WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE

Support DVD Contents Drivers

Form Factor ATX Form Factor, 12”x 9.6” (30.5cm x 24.4cm)

*Specications are subject to change without notice.

1 x PS/2 Mouse port (green) 1 x Coaxial S/PDIF Out 1 x Optical S/PDIF Out 1 x Clear CMOS switch 1 x IEEE1394a 2 x RJ45 ports 2 x USB 3.0/2.0 ports 6 x USB 2.0/1.1 ports 1 x eSATA port 10-channel Audio I/O

1 x IDE connector 7 x SATA 3.0Gb/s connectors 2 x SATA 6.0Gb/s connectors (gray) 1 x CPU Fan connector 2 x Chassis Fan connectors (1 x 4-pin, 1 x 3-pin) 1 x Power Fan connector 1 x IEEE1394a connector 1 x Front panel audio connector 1 x S/PDIF Out Header 1 x CD audio in 1 x 24-pin ATX Power connector 1 x 8-pin EATX 12V Power connectors 1 x System Panel (Q-Connector) 1 x TURBO_CON header (for TurboV Remote) 1 x MemOK! button 1 x Power on switch 1 x Reset switch

SM BIOS 2.5, ACPI 2.0a

ASUS Utilities ASUS Update Anti-virus software (OEM version)

xiv

Chapter 1

User Manual

Chapter 1: Product introduction

1.1 Welcome!

Thank you for buying an ASUS® P7P55D-E Deluxe motherboard!

The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

ASUS P7P55D-E Deluxe

motherboard

4 x Serial ATA 3.0Gb/s cables

1 x 2-port USB 2.0 and 1-port

eSATA module

1 x ASUS Q-Shield 1 x 2-in-1 ASUS Q-Connector kit

• If any of the above items is damaged or missing, contact your retailer.

• The illustrated items above are for reference only. Actual product specications may

vary with different models.

User guide Support DVD

2 x Serial ATA 6.0Gb/s cables

with 6.0Gb/s label

1 x TurboV Remote

1 x Ultra DMA 133/

100/66 cable

1 x ASUS SLI bridge

connector

ASUS P7P55D-E Deluxe 1-1

1.3 Special features

1.3.1 Product highlights

Chapter 1

Intel® LGA1156 Lynneld / Clarkdale Processor Ready

This motherboard supports the latest Intel® Lynneld / Clarkdale processors in LGA1156 package, which has memory and PCI Express controller integrated to support 2-channel (4 DIMMs) DDR3 memory and 16 PCI Express 2.0 lanes, enabling higher graphics performance. Intel® Lynneld / Clarkdale processor is one of the most powerful and energy

efcient CPU in the world. Refer to page 2-5 for details.

Intel® P55

The Intel® P55 Express Chipset is the latest one-chipset design to support the latest 1156 socket Intel® Core™ i7 / Core™ i5 / Core™ i3 processors. Intel P55 provides improved

performance by utilizing serial point-to-point links, allowing increased bandwidth and stability.

PCIe 2.0

Double Speed; Double Bandwidth

This motherboard supports the latest PCIe 2.0 devices for double speed and bandwidth that enhances system performance. Refer to page 2-23 for details.

Quad-GPU SLI™ and Quad-GPU CrossFireX™ support!

Flexible Multi-GPU solutions, Your Weapon of Choice!

P7P55D-E Deluxe brings you the multi-GPU choice of either SLI™ or CrossFireX™. The motherboard features the most powerful Intel® P55 platform to optimize PCIe allocation in

multiple GPU congurations. Expect a brand-new gaming style you’ve never experienced

before! Refer to Chapter 5 for details.

Dual-Channel DDR3 2200(O.C.) / 1600 / 1333 / 1066 support

The motherboard supports DDR3 memory that features data transfer rates of 2200(O.C.) /

1600 / 1333 / 1066 MHz to meet the higher bandwidth requirements of the latest 3D graphics,

multimedia, and Internet applications. The dual-channel DDR3 architecture enlarges the bandwidth of your system memory to boost system performance. Refer to page 2-10 for details.

Unique PCIe x4 Bridge Chip for Ultra Performance

True USB 3.0 Support

Experience ultra-fast data transfers at 4.8Gbps with USB 3.0—the latest connectivity standard. Built to connect easily with next generation components and peripherals, USB 3.0 transfers data 10X faster and is also backward compatible with USB 2.0 components. Refer to page 2-28 for details.

True SATA 6Gb/s Support

Supporting next-generation Serial ATA (SATA) storage interface, this motherboard delivers up to 6.0Gb/s data transfer rates. Additionally, get enhanced scalability, faster data retrieval, double the bandwidth of current bus systems. Refer to page 2-34 for details.

1-2 Chapter 1: Product Introduction

1.3.2 ASUS Xtreme Design—Hybrid Processor

TurboV EVO

Ultimate O.C. Processor

The ultimate O.C. processor satises every level of overclockers—from die-hard enthusiasts

to beginners. Auto tuning intelligently pushes the system to the fastest clock speeds while

maintaining stability. Turbo Key boosts performance with just one touch; while TurboV offers

more options to advanced overclockers to achieve world O.C. record. Moreover, upgrade your CPU at no additional cost with CPU Level Up!

Auto Tuning

Auto System Level Up

Auto Tuning is an intelligent tool that automates overclocking to achieve a total system level up. This tool also provides stability testing. Even O.C. beginners can achieve extreme yet stable overclocking results with Auto Tuning!

TurboV Remote

Versatile, Real-time O.C. Hardware Controller

Imagine overclocking in real-time on a side controller without interrupting ongoing work and games. With ASUS TurboV Remote, you can easily perform overclocking and operate the Turbo Key and EPU directly. Refer to page 2-35 for details.

1.3.3 ASUS Xtreme Design—24 Hybrid Phase*

T.Probe

Leading Active Cooling Technology

The T.Probe microchip detects and balances power phase loading and temperature in real-

time. This feature optimizes the power phase functions, allowing components to run at lower

temperatures and extending their lifespan. Refer to page 3-28 and 4-8 for details.

* 24 Hybrid Phase = 16+3 Phase x T.Probe

Chapter 1

16+3 Phase Power Design

Unprecedented Innovation with the Best Quality Component for Best Performance

The groundbreaking 16+3 phase VRM design is brought to the ASUS motherboards. 16+3 phase power design, 16-phase for vCore and extra 3-phase for Memory controller inside

CPU can provide the highest power efciency, and hence generates less heat to effectively

enhance the overclocking capability. With the high quality power components such as low RDS (on) MOSFETs, Ferrite core chokes with lower hysteresis loss and 100% Japan-made high quality conductive polymer capacitors, ASUS 16+3 phase VRM design also ensure longer component life and minimum power loss.

1.3.4 ASUS Xtreme Design—Hybrid OS

Express Gate

0 to Internet in seconds!

Express Gate is an ASUS exclusive OS that provides you with quick access to the Internet and key applications before entering the Windows® OS. Refer to page 3-39 and 4-7 for details.

ASUS P7P55D-E Deluxe 1-3

1.3.5 ASUS Exclusive Features

MemOK!

Chapter 1

Any Memory is A-OK!

Memory compatibility is among the top concerns during computer upgrades. Worry no more. MemOK! is the fastest memory booting solution today. This remarkable memory rescue tool requires nothing but a push of a button to patch memory issues and get your system up and running in no time. The technology is able to determine failsafe settings that can dramatically improve your system booting success. Refer to page 2-26 for details.

ASUS EPU

System Level Energy Saving

The new ASUS EPU—the world’s rst power saving engine, has been upgraded to a new 6

engine version, which provides total system power savings by detecting current PC loadings and intelligently moderating power in real-time. With auto phase switching for components (which includes the CPU, VGA card, memory, chipset, hard drives and CPU cooler / system fans), the EPU automatically provides the most appropriate power usage via intelligent acceleration and overclocking—helping save power and money. Refer to page 4-6 for details.

ASUS Quiet Thermal Solution

ASUS Quiet Thermal solution makes system more stable and enhances the overclocking capability.

ASUS Fanless Design—Heat-pipe solution

The Heat Pipe design effectively directs the heat generated by the vCore area to the

heatsink near the back IO ports, where it can be carried away by existing airow from

CPU fan. The purpose of the innovative heat pipe design on this motherboard is that the groundbreaking fanless design does not have lifetime problems as a chipset fan does. The Heat Pipe design is the most reliable fanless thermal solution to date.

DO NOT uninstall the heat-pipe by yourself. Doing so may bend the tubing and affect the heat dissipation performance.

Up to 20ºC (36ºF) Cooler—Stack Cool 3+

Effective Fanless Heat Dissipation at 0dB

Stack Cool 3+ is a fanless cooling solution offered exclusively by ASUS. It effectively and noiselessly transfers heat generated by the critical components to the other side of the specially designed PCB (printed circuit board) for effective heat dissipation— making temperatures cooler by up to 20ºC.

Fan Xpert

Active Quiet & Cool

ASUS Fan Xpert intelligently allows users to adjust both the CPU and chassis fan speed according to different ambient temperature, which is caused by different climate conditions in different geographic regions and system loading. Built-in variety of useful

proles offer exible controls of fan speed to achieve a quiet and cool environment.

Refer to page 4-5 for details.

1-4 Chapter 1: Product Introduction

ASUS Crystal Sound

This feature can enhance speech-centric applications like Skype, online game, video conference and recording.

10-Channel Audio

Enjoy High-End 10-channel sound system on your PC!

The onboard 10-channel HD audio (High Denition Audio, previously codenamed Azalia) CODEC enables high-quality 192KHz/24-bit audio output, jack-sensing feature,

retasking functions and multi-streaming technology that simultaneously sends different audio streams to different destinations. This motherboard now adopts the future standard to deliver the most vivid audio enjoyment!! Refer to page 2-29 for details.

ASUS Noise Filter

Eliminate background noise while recording

This feature detects repetitive and stationary noises like computer fans, air conditioners, and other background noises then eliminates it in the incoming audio stream while recording.

DTS

DTS Surround Sensation UltraPC

DTS Surround Sensation UltraPC delivers exceptional 5.1 surround experience through the most common PC audio setups—your existing stereo speakers or headphones. In addition to virtual surround, “Bass enhancement” provides stronger low

frequency bass sound, and “Voice clarication” provides clear human dialogue even

with loud background sound. With these technologies, you may experience a better home-theater audio with ease.

ASUS EZ DIY

ASUS EZ DIY feature collection provides you easy ways to install computer components, update the BIOS or back up your favorite settings.

ASUS Onboard Switch

With an easy press during overclocking, the exclusive onboard switches allow gamers

to effortless ne-tune the performance without having to short the pins! Refer to page

2-25 for details.

ASUS Q-Design

DIY quickly, DIY easily!

ASUS Q-Design enhances your DIY experience. All of Q-LED, Q-Slot and Q-DIMM design speed up and simplify the DIY process!

ASUS Q-Shield

Easy and Comfortable Installations

The specially designed ASUS Q-Shield does without the usual “ngers”—making

it convenient and easy to install. With better electric conductivity, it ideally protects your motherboard against static electricity and shields it against Electronic Magnetic Interference (EMI).

Chapter 1

ASUS P7P55D-E Deluxe 1-5

ASUS Q-Connector

Make connection quick and accurate!

Chapter 1

The ASUS Q-Connector allows you to connect or disconnect chassis front panel cables in one easy step with one complete module. This unique module eliminates the trouble of plugging in one cable at a time, making connection quick and accurate. Refer to page 2-42 for details.

ASUS EZ-Flash 2

Simply update BIOS from a USB ash drive before entering the OS

EZ Flash 2 is a user-friendly BIOS update utility. Simply launch this tool and update

BIOS from a USB ash drive before entering the OS. You can update your BIOS only in a few clicks without preparing an additional oppy diskette or using an OS-based ash

utility. Refer to page 3-4 for details.

ASUS O.C. Prole

Conveniently restore or load multiple BIOS settings

Freely share and distribute favorite overclocking settings. The motherboard features

the ASUS O.C. Prole that allows users to conveniently store or load multiple BIOS settings. The BIOS settings can be stored in the CMOS or a separate le, giving users

freedom to share and distribute their favorite overclocking settings. Refer to page 3-37 for details.

ASUS MyLogo2™

This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen.

ASUS Multi-language BIOS

The multi-language BIOS allows you to select the language of your choice from the available

options. The localized BIOS setup menu helps you congure your system easier and faster.

Green ASUS

This motherboard and its packaging comply with the European Union’s Restriction on the

use of Hazardous Substances (RoHS). This is in line with the ASUS vision of creating

environment-friendly and recyclable products/packagings to safeguard consumers’ health

while minimizing the impact on the environment.

1-6 Chapter 1: Product Introduction

Chapter 2

Chapter 2: Hardware information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

• Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

ASUS P7P55D-E Deluxe 2-1

2.2 Motherboard overview

2.2.1 Motherboard layout

Chapter 2

Refer to

2.7 Connectors

connectors.

2-2 Chapter 2: Hardware information

for more information about rear panel connectors and internal

2.2.2 Layout contents

Connectors/Jumpers/Slots Page

1. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-40

2. LGA1156 CPU Socket 2-5

3. CPU / IMC / DRAM overvoltage setting switches (OV_DRAM; OV_IMC; OV_CPU)

4. DDR3 DIMM slots 2-10

5. CPU, chassis, and power fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1, 3-pin CHA_FAN2, 3-pin PWR_FAN)

6. Serial port connector (10-1 pin COM1) 2-37

7. MemOK! switch 2-26

8. IDE connector (40-1 pin PRI_EIDE) 2-32

9. Intel® P55 Serial ATA connectors (7-pin SATA 1-6) 2-33

10. System panel connector (20-8 pin PANEL) 2-41

11. JMicron® JMB363 Serial ATA connector (7-pin SATA_E1 [black]) 2-35

12. Marvell® Serial ATA 6.0 Gb/s connectors (7-pin SATA_6G_1/2 [gray])

13. USB connectors (10-1 pin USB910, USB1112, USB1314) 2-36

14. Reset switch 2-25

15. Power-on switch 2-25

16. IEEE 1394a port connector (10-1 pin IE1394_2) 2-37

17. Optical drive audio connector (4-pin CD) 2-36

18. Front panel audio connector (10-1 pin AAFP) 2-39

19. Digital audio connector (4-1 pin SPDIF_OUT) 2-39

20. TurboV Remote connector (5-pin TURBO_CON) 2-35

2-27

2-38

2-34

Chapter 2

ASUS P7P55D-E Deluxe 2-3

2.2.3 Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

2.2.4 Screw holes

Place nine screws into the holes indicated by circles to secure the motherboard to the chassis.

Chapter 2

DO NOT overtighten the screws! Doing so can damage the motherboard.

Place this side towards

the rear of the chassis

2-4 Chapter 2: Hardware information

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1156 socket designed for the Intel® Core™ i7 / Core™ i5 / Core™ i3 processors.

Ensure that all power cables are unplugged before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/ transit-related.

• Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1156 socket.

• The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

2.3.1 Installing the CPU

To install a CPU:

1. Locate the CPU socket on the motherboard.

Chapter 2

2. Press the load lever with your thumb (A), and then move it to the right (B) until it is

Load lever

released from the retention tab.

To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.

Retention tab

ASUS P7P55D-E Deluxe 2-5

3. Lift the load lever in the direction of the arrow until the load plate is completely lifted.

Chapter 2

4. Remove the PnP cap from the CPU socket by lifting the tab only.

Load plate

PnP cap

Cap tab

5. Position the CPU over the socket, ensuring that the gold triangle is on the bottom-left corner of the socket, and then

t the socket alignment keys into the CPU

CPU notches

notches.

The CPU ts in only one correct

orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU!

2-6 Chapter 2: Hardware information

Gold

triangle

mark

Alignment keys

6. Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer.

Some heatsinks come with preapplied thermal paste. If so, skip this step.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your skin, wash it off immediately, and seek professional medical help.

7. Close the load plate (A), and then push down the load lever (B), ensuring that the front edge of the load plate slides under the retention lock (C).

Chapter 2

8. Insert the load lever under the retention tab.

ASUS P7P55D-E Deluxe 2-7

2.3.2 Installing the CPU heatsink and fan

The Intel® LGA1156 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.

Chapter 2

To install the CPU heatsink and fan:

• When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, ensure that you use only Intel®-certied multi-directional heatsink and fan.

• Your Intel® LGA1156 heatsink and fan assembly comes in a push-pin design and requires no tool to install.

• Use an LGA1156-compatible CPU heatsink and fan assembly only. The LGA1156

socket is incompatible with the LGA775 and LGA1366 sockets in size and dimension.

If you purchased a separate CPU heatsink and fan assembly, ensure that the Thermal Interface Material is properly applied to the CPU heatsink or CPU before you install the heatsink and fan assembly.

Ensure that you have installed the motherboard to the chassis before you install the CPU fan and heatsink assembly.

1. Place the heatsink on top of the installed

CPU, ensuring that the four fasteners match the holes on the motherboard.

2. Push down two fasteners at a time in

a diagonal sequence to secure the heatsink and fan assembly in place.

2-8 Chapter 2: Hardware information

Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan connector.

3. Connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.

DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if you fail to plug this connector.

2.3.3 Uninstalling the CPU heatsink and fan

To uninstall the CPU heatsink and fan:

Chapter 2

1. Disconnect the CPU fan cable from the connector on the motherboard.

2. Rotate each fastener counterclockwise.

3. Pull up two fasteners at a time in a

diagonal sequence to disengage the heatsink and fan assembly from the motherboard.

4. Carefully remove the heatsink and fan assembly from the motherboard.

ASUS P7P55D-E Deluxe 2-9

2.4 System memory

2.4.1 Overview

The motherboard comes with four Double Data Rate 3 (DDR3) Dual In-line Memory Modules (DIMM) sockets.

A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.

The gure illustrates the location of the DDR3 DIMM sockets:

Chapter 2

Recommended memory congurations

One DIMM:

Install only one memory module in slot A1 or B1 as a single-channel operation.

Four DIMMs (dual-channel operation):Two DIMMs (dual-channel operation):

2-10 Chapter 2: Hardware information

+ 102 hidden pages