ASUS A7V133-VM User Manual

®
A7V133-VM
PC133/VC133
200/266 MHz FSB AGP 4X
Socket A Motherboard
USERS MANUAL
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EI­THER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED T O THE IMPLIED WAR­RANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PAR TICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN­TIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DA TA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Product warranty or service will not be extended if: (1) the product is repaired, modified or al­tered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
• VIA and KT133 are trademarks of VIA Technologies, Inc.
• AMD, Athlon™ are trademarks of Advanced Micro Devices, Inc.
• Windows and MS-DOS are registered trademarks of Microsoft Corporation.
• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
• Trend and ChipAwayVirus are trademarks of Trend Micro, Inc.
• Other company and product names may be trademarks or registered trademarks of the respective companies with which they are associated.
The product name and revision number are both printed on the product itself. Manual revisions are released for each product design represented by the digit before and after the period of the manual revision number . Manual updates are represented by the third digit in the manual revision number.
For previous or updated manuals, BIOS, drivers, or product release information, contact ASUS at http://www .asus.com.tw or through any of the means indicated on the following page.
SPECIFICA TIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMA TIONAL USE ONL Y, AND ARE SUBJECT TO CHANGE A T ANY TIME WITH­OUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURA­CIES THAT MA Y APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFT­WARE DESCRIBED IN IT.
Copyright © 2001 ASUSTeK COMPUTER INC. All Rights Reserved.
Product Name: ASUS A7V133-VM Manual Revision: 1.07 E698 Release Date: June 2001
2
ASUS A7V133-VM User’s Manual
ASUS CONTACT INFORMATION
ASUSTeK COMPUTER INC. (Asia-Pacific)
Marketing
Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw
Technical Support
MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2893-7775 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS
ASUS COMPUTER INTERNATIONAL (America)
Marketing
Address: 6737 Mowry Avenue, Mowry Business Center, Building 2
Newark, CA 94560, USA Fax: +1-510-608-4555 Email: tmd1@asus.com
Technical Support
Fax: +1-510-608-4555 Email: tsd@asus.com WWW: www.asus.com FTP: ftp.asus.com/Pub/ASUS
ASUS COMPUTER GmbH (Europe)
Marketing
Address: Harkortstr. 25, 40880 Ratingen, BRD, Germany Fax: +49-2102-442066 Email: sales@asuscom.de (for marketing requests only)
Technical Support
Hotline: MB/Others: +49-2102-9599-0 Notebook: +49-2102-9599-10 Fax: +49-2102-9599-11 Support (Email): www.asuscom.de/de/support (for online support) WWW: www.asuscom.de FTP: ftp.asuscom.de/pub/ASUSCOM
ASUS A7V133-VM User’s Manual 3
CONTENTS
1. INTRODUCTION 7
1.1 How This Manual Is Organized................................................. 7
1.2 Item Checklist ............................................................................ 7
2. FEATURES 8
2.1 The ASUS A7V133-VM ............................................................ 8
2.1.1 Specifications.................................................................. 8
2.1.2 Special Features ............................................................ 10
2.1.3 Optional Components ................................................... 10
2.1.4 Performance Features.................................................... 10
2.1.5 Intelligence.................................................................... 11
2.2 Motherboard Components ....................................................... 12
2.2.1 Component Locations ................................................... 13
3. HARDWARE SETUP 14
3.1 Motherboard Layout ................................................................ 14
3.2 Layout Contents ....................................................................... 15
3.3 Hardware Setup Procedure ...................................................... 16
3.4 Motherboard Settings............................................................... 16
3.5 System Memory (DIMM) ........................................................ 20
3.5.1 General DIMM Notes ................................................... 20
3.5.2 Memory Installation...................................................... 21
3.6 Central Processing Unit (CPU)................................................ 23
3.7 Expansion Cards ...................................................................... 24
3.7.1 Expansion Card Installation Procedure......................... 24
3.7.2 Assigning IRQs for Expansion Cards ........................... 25
3.7.3 Accelerated Graphics Port (AGP)................................. 26
3.8 External Connectors................................................................. 27
3.9 Starting Up the First Time ....................................................... 39
4. BIOS SETUP 41
4.1 Managing and Updating Your BIOS........................................ 41
4.1.1 Upon First Use of the Computer System ...................... 41
4.1.2 Updating BIOS Procedures........................................... 42
4.2 BIOS Setup Program ............................................................... 44
4.2.1 BIOS Menu Bar ............................................................ 45
4.2.2 Legend Bar.................................................................... 46
4.3 Main Menu............................................................................... 48
4.3.1 Primary & Secondary Master/Slave.............................. 49
4
ASUS A7V133-VM User’s Manual
CONTENTS
4.3.2 Keyboard Features ........................................................ 52
4.4 Advanced Menu ....................................................................... 54
4.4.1 Chip Configuration ....................................................... 57
4.4.2 I/O Device Configuration ............................................. 60
4.4.3 PCI Configuration......................................................... 63
4.4.4 Shadow Configuration .................................................... 67
4.5 Power Menu ............................................................................. 68
4.5.1 Power Up Control ......................................................... 70
4.5.2 Hardware Monitor......................................................... 72
4.6 Boot Menu ............................................................................... 73
4.7 Exit Menu ................................................................................ 75
5. SOFTWARE SETUP 77
5.1 Install Operating System.......................................................... 77
5.2 Start Windows.......................................................................... 77
5.3 A7V133-VM Series Support CD ............................................. 78
6. SOFTWARE REFERENCE 79
6.1 ASUS PC Probe ....................................................................... 79
6.2 CyberLink PowerPlayer SE ..................................................... 84
6.3 CyberLink PowerDVD ............................................................ 84
6.4 CyberLink VideoLive Mail...................................................... 86
6.5 ASUS LiveUpdate ................................................................... 88
7. APPENDIX 89
7.1 Glossary ................................................................................... 89
INDEX 93
ASUS A7V133-VM User’s Manual 5
FCC & DOC COMPLIANCE
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa­tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer­ence by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications to this product not expressly ap-
proved by the manufacturer could void any assurances of safety or performance and could result in violation of Part 15 of the FCC Rules.
Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the Federal Register, National Archives and Records Administration, U.S. Government Printing Office.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
6
ASUS A7V133-VM User’s Manual
1. INTRODUCTION
1.1 How This Manual Is Organized
This manual is divided into the following sections:
1. INTRODUCTION Manual information and checklist
2. FEATURES Production information and specifications
3. HARDWARE SETUP Intructions on setting up the motherboard.
4. BIOS SETUP Intructions on setting up the BIOS
5. SOFTWARE SETUP Intructions on setting up the included software
6. SOFTWARE REFERENCE Reference material for the included software
7. APPENDIX Optional items and general reference
1.2 Item Checklist
Check that your package is complete. If you discover damaged or missing items, contact your retailer.
Manual / Checklist
1. INTRODUCTION
Package Contents
(1) ASUS Motherboard (1) 40-pin 80-conductor ribbon
cable for internal UltraDMA/ 100, UltraDMA/66 or UltraDMA/33 devices
(1) Ribbon cable for one 5.25 and
two 3.5 floppy disk drives
(1) ASUS 2-port USB Connector Set (1) Bag of spare jumper caps (1) ASUS Support CD with drivers
and utilities
(1) This Motherboard User’s
Manual
(1) COM2 Bracket
Optional Items
ASUS CIDB chassis intrusion detec­tion module
ASUS IrDA-compliant infrared module
ASUS PCI-L101 W ake-On-LAN 10/ 100 Ethernet Card
ASUS A7V133-VM User’s Manual 7
2.1 The ASUS A7V133-VM
The ASUS A7V133-VM motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors.
2.1.1 Specifications
AMD Athlon/Duron Processor Support: Supports Socket A-based AMD
2. FEATURES
Specifications
North Bridge System Chipset: Features the VIA VT8365A (VIA KM133A)
Super South South Bridge System PCIset: VIA VT82C686B PCI set with
PC100 SDRAM: Equipped with two Dual Inline Memory Module (DIMM)
JumperFree Mode: Allows processor settings and easy overclocking of fre-
2. FEATURES
Athlon/Duron processors.
system controller with support for 200/266 MHz Front Side Bus (FSB); up to 1GB of PC133/PC100 SDRAM; S3 Savage4 Integrated Graphics with 2D/3D Video Accelerator; complies with AGP 2.0 specifications for 4X, 2X, and 1X AGP modes; and PCI 2.2. bus interface with support for 3 PCI masters. It is optimized to deliver enhanced AMD Athlon™/Duron™ processor system per­formance.
PCI Super-I/O Integrated Peripheral Controller (PSIPC) with support for UltraDMA/100, which allows burst mode data transfer rates of up to 100MB/ sec; AC97 audio; USB controller with root hub and four function ports.
sockets to support Intel PC100-compliant (8, 16, 32, 64, 128, 256, or 512MB) SDRAM up to 1GB.
quency and Vcore voltage all through BIOS setup when JumperFree mode is enabled. Easy-to-use DIP switches instead of jumpers are included to allow manual adjustment of the processors external frequency.
AGP Slot: Supports AGP cards for high performance, component level inter-
connection targeted at 3D graphical applications supporting 133MHz 4X mode.
UltraDMA/100 Support: Comes with an onboard PCI Bus Master IDE con-
troller with two connectors that support four A T A100/66/33 devices on two chan­nels. Supports UltraDMA/100, UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE devices, such as DVD­ROM, CD-ROM, CD-R/RW, LS-120, and Tape Backup drives.
USB: Supports up to 4 USB ports, two on the back panel and two midboard, for
more peripheral connectivity options.
PC Health Monitoring: Provides an easy way to examine and manage system
status information, such as CPU and systerm voltages, temperatures, and fan status through the onboard hardware ASUS ASIC and the bundled ASUS PC Probe.
SMBus: Features the System Management Bus interface, which is used to physi-
cally transport commands and information between SMBus devices.
8
ASUS A7V133-VM User’s Manual
2. FEATURES
PCI Expansion Slots: Provides three 32-bit PCI (Rev. 2.2) expansion slots,
which can support Bus Master PCI cards, such as SCSI or LAN cards (PCI supports up to 133MB/s maximum throughput).
Super Multi-I/O: Provides two high-speed UART compatible serial ports and
one parallel port with EPP and ECP capabilities.
Enhanced ACPI & Anti-Boot Virus Protection: Programmable BIOS (Flash
EEPROM), offering enhanced ACPI for W indows 98 compatibility , built-in firm­ware-based virus protection, and autodetection of most devices for virtually au­tomatic setup.
Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-
ter busses to the memory and processor.
Smart BIOS: 2Mb firmware provides Vcore and CPU/SDRAM frequency ad-
justments, boot block write protection, and HD/SCSI/MO/ZIP/CD/Floppy boot selection. Power supply autodetects to enable/disable suspend-to-RAM.
Integrated Infrared (IrDA) Support: Integrated IR supports an optional re-
mote control package for wireless interfacing with external peripherals, per­sonal gadgets, or an optional remote controller.
Specifications
2. FEATURES
Desktop Management Interface (DMI): Supports DMI through BIOS, which
allows hardware to communicate within a standard protocol creating a higher level of compatibility. (Requires DMI-enabled components.)
Color-coded Connectors: To enhance user accessibility to system components and
to meet PC 99 compliancy , major connectors in this motherboard are color -coded.
ASUS A7V133-VM User’s Manual 9
2. FEATURES
Performance
2. FEATURES
2.1.2 Special Features
ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more
Energy Saving Features for operating systems that support OS Direct Power Management (OSPM) functionality . W ith these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. T o maximize functions, an ACPI-supported OS, like W indows 98 must be used.
Easy Installation: Incorporates BIOS that supports autodetection of hard disk
drives, PS/2 mouse, and Plug and Play devices to make the setup of hard disk drives, expansion cards, and other devices virtually automatic.
New Compliancy: Both the BIOS and hardware levels of this motherboard meet
the stringent requirements for PC 99 certification The new PC 99 requirements for systems and components are based on the following high-level goals: Sup­port for Plug and Play compatibility and power management for configuring and managing all system components, and 32-bit device drivers and installation procedures for W indows95/98/NT. Color-coded connectors and descriptive icons make identification easy as required by PC 99.
2.1.3 Optional Components
Realtek RTL8139C Ethernet: single chip fast ethernet controller for 100/10
Mbps capacity and supports WOL (Wake-on-LAN) feature.
Onboard AC97 Audio Contr oller: Supports advanced automated audio per-
formance.
PCI Controller: Creative CT5880 Audio Controller Chipset with AC97 Audio
CODEC complete with software support.
2.1.4 Performance Features
Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-
ter busses to the memory and processor.
High-Speed Data Transfer Interface: IDE transfers using UltraDMA/33 Bus
Master IDE can handle rates up to 33MB/s. This motherboard with its chipset and support for UltraDMA/100 triples the data transfer rate to 100MB/s. UltraDMA/100 is backward compatible with both DMA/33 and DMA and with existing DMA devices and systems so there is no need to upgrade current EIDE/ IDE drives and host systems. (UltraDMA/100 requires a 40-pin 80-conductor cable to be enabled.)
10
ASUS A7V133-VM User’s Manual
2. FEATURES
VCM/SDRAM Optimized Performance: This motherboard supports a new gen-
eration memory, NEC’s 64Mb V irtual Channel Memory (VCM) Synchronous Dy- namic Random Access Memory (SDRAM), which is compatible to the industry standard SDRAM. The VCM’s core design provides up to 50% higher SDRAM speed at reduced power consumption of about 30%. This motherboard also supports standard SDRAM, which increases the data transfer rate (1.064GB/s max using PC133-compliant SDRAMs and 800MB/s max using PC100-compliant SDRAMs).
2.1.5 Intelligence
Auto Fan Off: The system fans will power off automatically even in sleep mode. This function reduces both energy consumption and system noise, and is
an important feature in implementing silent PC systems.
Dual Function Power Button: Pushing the power button for less than 4 sec- onds when the system is in the working state places the system into one of two states: sleep mode or soft-off mode, depending on the BIOS or OS setting (see PWR Button < 4 Secs in 4.5 Power Menu). When the power button is pressed for more than 4 seconds, the system enters the soft-off mode regardless of the BIOS setting.
Intelligence
2. FEATURES
Fan Status Monitoring and Alarm: To prevent system overheat and system damage, the CPU, power supply, and system fans can be monitored for RPM and failure. All fans are set for its normal RPM range and alarm thresholds.
Remote Ring On (requires modem): This allows a computer to be turned on remotely through an internal or external modem. With this benefit on-hand, users can access vital information from their computers from anywhere in the world!
System Resources Alert: Todays operating systems such as Windows 95/98/ NT and OS/2, require much more memory and hard drive space to present enor­mous user interfaces and run large applications. The system resource monitor will warn the user before the system resources are used up to prevent possible application crashes. Suggestions will give the user information on managing their limited resources more efficiently.
Temperature Monitoring and Alert: CPU temperature is monitored by the ASUS ASIC to prevent system overheat and system damage.
Voltage Monitoring and Alert: System voltage levels are monitored to ensure stable voltage to critical motherboard components. Voltage specifications are more critical for future processors, so monitoring is necessary to ensure proper system configuration and management.
ASUS A7V133-VM User’s Manual 11
2. FEATURES
2.2 Motherboard Components
See opposite page for locations.
Processor Support Socket A for AMD Athlon/Duron Processors........................... 3
Motherboard Parts
2. FEATURES
Expansion Slots 3PCI Slots ............................................................................... 17
Location
(NOTE: CPU thermal sensor is integrated on the motherboard, located near the center of the CPU heat source, just below the CPU socket)
Feature Setting DIP Switches ................................................... 6
Chipsets VIA VT8365 (VIA KM133A) system controller ...................... 2
VIA VT82C686B PCIset......................................................... 14
2Mbit Programmable Flash EEPROM ..................................... 9
Main Memory Maximum 1GB support
2 DIMM Sockets ...................................................................... 4
VC133/PC133 memory support
1 Accelerated Graphics Port (AGP) Slot ................................ 19
System I/O 1 Floppy Disk Driver Connector .............................................. 8
2 IDE Connectors (UltraDMA/100 Support) ........................... 5
1 Parallel Port Connector ............................................. (Top) 22
1 Serial COM1 Port Connector .............................. (Bottom) 23
1 VGA Connector ................................................... (Bottom) 21
1 Serial COM2 Port Connector ............................................. 15
USB Connectors (Port 0 & Port 1) ........................ (Bottom) 24
USB Connectors (Port 2 & Port 3) ......................................... 13
1 PS/2 Mouse Connector .............................................. (Top) 25
1 PS/2 Keyboard Connector ................................... (Bottom) 25
Audio AC97 V2.1 Audio Codec ..................................... (optional) 18
Creative Audio Controller .......................................... (optional)
1 Game/MIDI Connector (on audio model only) .............. (Top)
1 Line Out Connector (on audio model only) ........ (Bottom) 20
1 Line In Connector (on audio model only) ........... (Bottom) 20
1 Microphone Connector (on audio model only) ... (Bottom) 20
Network Features Realtek RTL 8139C Fast Ethernet Controller.............. (optional)
1 LAN (RJ45) Connector ............................. (optional) (top) 24
Wake-On-LAN Connector...................................................... 16
Wake-On-Ring Connector ...................................................... 11
Hardware Monitoring System Voltage Monitoring (integrated in ASUS ASIC) ......... 9
3 Fan Power and Speed Monitoring Connectors
Power ATX Power Supply Connector ................................................. 1
Others Onboard LED ........................................................................... 7
SMBus Connector .................................................................. 12
Form Factor Micro A TX
12
ASUS A7V133-VM User’s Manual
2. FEATURES
2.2.1 Component Locations
25 24
23
22
21
20
19
1 2 345
6 78
2. FEATURES
Motherboard Parts
18 17
-
16
911121315
1014
ASUS A7V133-VM User’s Manual 13
3. HARDWARE SETUP
3.1 Motherboard Layout
24.5cm (9.6in)
PS/2
T: Mouse B: Keyboard
USB
T: USB1 B: USB2
COM1
Top:
RJ-45
Socket A
CPU_FAN
CR2032 3V Lithium Cell
CMOS Power
CLRTC
LED
VGA
Motherboard Layout
3. H/W SETUP
Line Out
Line
Mic
GAME_AUDIO
Audio
Codec
Grayed components are optional at the time of purchase.
PS_FAN
PARALLEL PORT
In
In
HPHONE
MODEM
Audio
Chip
AUXCD
ATXPWR
Realtek
Fast
Enternet
WOLCON
VIA
VT8365A
Chipset
Accelerated Graphics Port (AGP)
PCI Slot 1
PCI Slot 2
A7V133-VM
PCI Slot 3
®
COM2
SW1
JF
CHASS_FAN
01
JEN
VIA
VT82C686B
Chipset
IR
IDELED
CHASS
DIMM Socket 1 (64/72-bit, 168-pin module)
DIMM Socket 2 (64/72-bit, 168-pin module)
23
PRIMARY IDE
SECONDARY IDE
USB2
SMB
WOR
HPANEL
24.5cm (9.6in)
FLOPPY
Flash EEPROM
(Programable BIOS)
ASCI
14
ASUS A7V133-VM User’s Manual
3. HARDWARE SETUP
3.2 Layout Contents
Motherboard Settings
1) JEN p. 17 JumperFree Mode (JumperFree/Jumper Mode)
2) JF p. 18 CPU / FSB Frequency Selection
2) SW1 1–4 p. 19 CPU External Frequency Setting
Expansion Slots/Sockets
1) System Memory p.20 System Memory Support
2) DIMM1/2 p.21 DIMM Memory Module Support
3) Socket 462 (Socket A) p.23 CPU Support
4) PCI1/2/3 p.24 32-bit PCI Bus Expansion Slots
5) AGP p.26 Accelerated Graphics Port (AGP)
Connectors
1) PS2KBMS p.27 PS/2 Mouse Port Connector (6 pin female)
2) PS2KBMS p.27 PS/2 Keyboard Port Connector (6 pin female)
3) USB p.28 Universal Serial Bus Connectors 0 & 1 (T wo 4 pin female)
4) PRINTER p.28 Parallel Port Connector (25 pin female)
5) VGA p.28 Monitor Output Connector and bracket (15 pin male)
6) COM1/2 p.29 Serial Port Connector (9 pin male)
7) GAME_AUDIO p.29 Game/MIDI Connector (15 pin female) (optional)
8) GAME_AUDIO p.30 Audio Port Connectors (Three 1/8” female) (optional)
9) RJ45 p.30 Fast-Ethernet Port Connector (RJ45) (optional)
10) PRIMARY I D E p.31 IDE Connectors (Two 40-1 pin) SECONDARY IDE
11) FLOPPY p.31 Floppy Disk Drive Port Connector (34 pin)
12) IR p.32 Infrared Module Connector (5 pin)
13) CPU_FAN, PS_FAN p.33 CPU Supply, PowerFan Connectors (3 pin) CD_IN, AUX, MODEM
14)
15) HPHONE p.34 Headphone True-Level Out Header (3 pin)
16) USB2 p.35 USB Header (10-1 pin)
17) SMB p.35 SMBus Connector (5-1 pin)
18) ATXPWR p.36 ATX Power Supply Connector (20 pin)
19) IDELED p.36 IDE Activity LED (2 pin)
20) SPEAKER (PANEL) p.37 System Warning Speaker Connector (4 pin)
21) PWR.LED (PANEL) p.37 System Power LED Lead (3 pin)
22) RESET (PANEL) p.37 Reset Switch Lead (2 pin)
23) PWR.SW (PANEL) p.37 ATX / Soft-Off Switch Lead (2 pin)
24) SMI (PANEL) p.37 System Management Interrupt Lead (2 pin)
p.34 Internal Audio Connectors (Three 4 pin)
3. H/W SETUP
Layout Contents
ASUS A7V133-VM User’s Manual 15
3.3 Hardware Setup Procedure
Before using your computer, you must complete the following steps:
1. Check Motherboard Settings
2. Install Memory Modules
3. Install the Central Processing Unit (CPU)
4. Install Expansion Cards
5. Connect Ribbon Cables, Panel Wires, and Power Supply
6. Setup the BIOS Software
3.4 Motherboard Settings
This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers.
W ARNING! Computer motherboards and expansion cards contain very delicate
3. H/W SETUP
Integrated Circuit (IC) chips. To protect them against damage from static electric­ity, you should follow some precautions whenever you work on your computer.
3. HARDWARE SETUP
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads o r connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power connector on the motherboard.
WARNING! Make sure that you unplug your power supply when adding or re-
moving system components. Failure to do so may cause severe damage to your motherboard, peripherals, and/or components. The onboard LED when lit acts as a reminder that the system is in suspend or soft-off mode and not powered OFF.
16
A7V133-VM
®
A7V133-VM Onboard LED
ASUS A7V133-VM Users Manual
ON
Standby
Power
LED
OFF
Powered
Off
3. HARDWARE SETUP
Motherboard Features Settings (DSW Switches - SW1)
The motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the
switches in the OFF position.
DSW
12
34
ON
ONOFF
ON 34
12
1. Frequency Selection
A7V133-VM
®
2. Frequency Selection
3. Frequency Selection
4. Frequency Selection
A7V133-VM DIP Switches
1) Jumper Setting (JEN)
This jumper allows you to enable or disable the JumperFree mode. The JumperFree mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).
3. H/W SETUP
Motherboard Settings
Jumper Setting JEN
JumperFree [2-3] (default) Jumper Mode [1-2]
DSW Setting : In JumperFree™ mode, DIP switches (SW1) must be set toOFF
SW1
34
OFF
2
Enable
12
3
A7V133-VM
®
A7V133-VM JumperFree™ Mode Setting
JEN
12
Disable
Jumper Mode
ON
JEN
JumperFree Mode (Default)
ASUS A7V133-VM Users Manual 17
2) CPU / FSB Frequency Selection (JF)
The JF jumper is set to a default that operates with AMD 133 FSB capacity processors. The factory default is set to run the FSB at 133 MHz and the JF jumper is preset to [2-3] and all DSW (SW1) switches are preset to OFF . If AMD 100 MHz capacity processors are used, then reset the JF jumper to [1-2] and change the DSW (SW1) switches to the 100 MHz setting shown below. If the JF and switch settings do not match the capacity of the processor, the motherboard may not boot up.
JF
1
2 3
133MHz 100MHz
2
Motherboard Settings
3. H/W SETUP
A7V133-VM CPU/FSB Setting (JF)
ON
12
34
A7V133-VM
®
CPU
133MHz
(Default)
ON
12
34
CPU 100MHz
18
ASUS A7V133-VM Users Manual
3) CPU External Frequency Setting (SW1 Switches 1–4)
This option tells the clock generator what frequency to send to the CPU, SDRAM, and the chipset. This allows the selection of the CPU’s External frequency . The CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s Internal frequency (the advertised CPU speed).
IMPORTANT:
1. For normal frequencies, 100, 103 and 105 MHz, the JF jumpers must be set to [1-2]. For the purpose of overclocking, 133 MHz and above, the JF jumper must be set to [2-3] and speed adjustments must be made through BIOS using JumperFree Mode and a 133 MHz capacity processor.
2. To use the manual DSW (SW1) switches as shown below, the JEN must be set to Jumper Mode: [1-2]; (See 1, p. 18).
3. Otherwise, if JumperFree Mode is enabled, all DSW (SW1) switches must be set to OFF and the JEN jumper must be set to [2-3]. (See #1 on the previ- ous page). Then, the BIOS setup can be used in place of these switches (Set Operating Frequency Setting to User Define under 4.4 Advanced Menu in BIOS Setup to set the CPU Frequency).
4. If processor settings above 133 MHz are required, then you must use a 133 MHz capacity processor, JumperFree Mode and BIOS to make adjustments.
A7V133-VM
®
A7V133-VM CPU External Frequency Selection
ON
12
34
CPU 100MHz
ON
12
34
CPU
105MHz
ON
12
103MHz
ON
12
133MHz
34
34
External Frequency Table
CPU PCI Frequency Selection Switches
(MHz) (MHz) 1 2 3 4
100.00 33.33 [ON] [ON] [OFF] [ON]
103.00 34.33 [OFF] [ON] [OFF] [ON]
105.00 35.00 [ON] [OFF] [OFF] [ON]
133.00 33.33 [OFF] [OFF] [OFF] [OFF]
3. H/W SETUP
Motherboard Settings
WARNING! Frequencies other than the recommended CPU bus frequencies are
not guaranteed to be stable. Overclocking your processor is not recommended. It may result in a slower speed and premature wearing of the processor.
NOTE: For updated processor settings, visit the ASUS at: WWW.ASUS.COM
ASUS A7V133-VM Users Manual 19
3.5 System Memory (DIMM)
This motherboard uses only Dual Inline Memory Modules (DIMMs). Two sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of 8, 16, 32, 64, 128, 256, or 512MB to form a memory size between 8MB to 1GB. One side (with memory chips) of the DIMM takes up one row on the motherboard.
Memory speed setup is recommended through SDRAM Configuration under Chipset Features Setup”.
IMPORTANT (see General DIMM Notes below for more):
SDRAMs used must be compatible with the current Intel PC133 SDRAM specification.
DO NOT attempt to replace PC133 SDRAMs with VCM SDRAMs.
The motherboard only supports PC100 / PC133 DIMMs
System Memory
3. H/W SETUP
SDRAMs for system memory. Registered DIMMs are not supported.
3. HARDWARE SETUP
Install memory in any combination as follows:
DIMM Location 168-pin DIMM Total Memory
Socket 1 (Rows 0&1) SDRAM 8, 16, 32, 64, 128, 256, 512MB x1 Socket 2 (Rows 2&3) SDRAM 8, 16, 32, 64, 128, 256, 512MB x1
Total System Memory (Max 1024MB) =
3.5.1 General DIMM Notes
DIMMs that have more than 18 chips are not supported on this motherboard.
For the system CPU bus to operate at 100MHz/133MHz, use only PC100-/PC133-
compliant DIMMs.
ASUS motherboards support SPD (Serial Presence Detect) DIMMs. This is the memory of choice for best performance vs. stability.
BIOS shows SDRAM memory on bootup screen.
Single-sided DIMMs come in 16, 32, 64,128, 256MB; double-sided come in 32, 64,
128, 256, 512MB.
20
WARNING! Be sure that the DIMM you use can handle the specified SDRAM
MHz or else bootup will not be possible.
ASUS A7V133-VM Users Manual
3. HARDWARE SETUP
3.5.2 Memory Installation
WARNING! Make sure that you unplug your power supply when adding or
removing memory modules or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards (see 3.3 Hardware Setup Procedure for more information).
Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation shown. DRAM SIMM modules have the same pin contacts on both sides. SDRAM DIMMs have different pin contacts on each side and therefore have a higher pin density.
20 Pins
60 Pins
88 Pins
A7V133-VM
®
A7V133-VM 168-Pin DIMM Sockets
The DIMMs must be 3.3Volt unbuffered SDRAMs. To determine the DIMM type, check the notches on the DIMMs (see figure below).
168-Pin DIMM Notch Key Definitions (3.3V)
DRAM Key Position
RFU
Buffered
Unbuffered
Voltage Key Position
5.0V
Reserved
3.3V
3. H/W SETUP
System Memory
The notches on the DIMM will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals per DIMM.
ASUS A7V133-VM Users Manual 21
(This page was intentionally left blank.)
System Memory
3. H/W SETUP
3. HARDWARE SETUP
22
ASUS A7V133-VM Users Manual
3. HARDWARE SETUP
3.6 Central Processing Unit (CPU)
The motherboard provides a Socket 462 or Socket A for CPU installation. A fan and heatsink should be attached to the CPU to prevent overheating. Purchase and install a fan and heatsink before turning on the system.
CPU NOTCH TO INNER CORNER
LOCK
LEVER
AMD CPU
A7V133-VM
A7V133-VM Socket A
1. Locate the Socket 462 and open it by pulling the lever gently sideways away from the socket. Then lift the lever upwards. The socket lever must be fully opened (90 to 100 degrees).
2. Insert the CPU with the correct orientation. The notched corner of the CPU must be oriented toward the inner corner of the socket base nearest to the lever hinge.
CAUTION! The CPU fits in one orientation
and should drop easily into place. Do not force the CPU into the socket to avoid bending the
pins. If the CPU does not fit, check its alignment and look for bent pins.
CPU NOTCH
CPU
3. H/W SETUP
3. Once completely inserted, press the CPU firmly and close the socket lever until it snaps into its locked position.
4. Place the CPU fan and heatsink on the CPU. The heatsink should entirely cover the CPU. Carefully attach the heatsink locking brace to the plastic clips on the socket base. With the added weight of the CPU fan and heatsink locking brace, no extra force is required to keep the CPU in place.
CAUTION! Take care not to scrape the motherboard surface when mounting a
clamp-style processor fan, or else damage may occur . When mounting a heatsink onto your CPU, make sure that exposed CPU capacitors do not touch the heatsink, or else damage may occur! Refer to heatsink/CPU documentation.
NOTE! Do not forget to set the correct Bus Frequency and Multiple (available
only on unlocked processors) to avoid start-up problems.
ASUS A7V133-VM Users Manual 23
3.7 Expansion Cards
WARNING! Unplug your power supply when adding or removing expansion
cards or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards.
3.7.1 Expansion Card Installation Procedure
1. Read the documentation for your expansion card and make any necessary hard-
2. Remove your computer system’s cover and the bracket plate on the slot you
3. Carefully align the card’s connectors and press firmly.
4. Secure the card on the slot with the screw you removed above.
Expansion Cards
3. H/W SETUP
5. Replace the computer systems cover.
6. Set up the BIOS if necessary
7. Install the necessary software drivers for your expansion card.
3. HARDWARE SETUP
ware or software settings for your expansion card, such as jumpers.
intend to use. Keep the bracket for possible future use.
(such as IRQ XX Reserved for Legacy Device: Yes in 4.4.3 PCI Configuration)
24 ASUS A7V133-VM Users Manual
3. HARDWARE SETUP
3.7.2 Assigning IRQs for Expansion Cards
Some expansion cards need an IRQ to operate. Generally, an IRQ must be exclu­sively assigned to one use. In a standard design, there are 16 IRQs available but most of them are already in use, leaving 6 IRQs free for expansion cards. If your motherboard has PCI audio onboard, an additional IRQ will be used. If your moth­erboard also has MIDI enabled, another IRQ will be used, leaving 4 IRQs free.
The following table lists the default IRQ assignments for standard PC devices. Use this table when configuring your system and for resolving IRQ conflicts.
Standard Interrupt Assignments
IRQ Priority Standard Function
0 1 System Timer 1 2 Keyboard Controller 2 N/A Programmable Interrupt 3* 11 Communications Port (COM2) 4* 12 Communications Port (COM1) 5* 13 Sound Card (sometimes LPT2) 6 14 Floppy Disk Controller 7* 15 Printer Port (LPT1) 8 3 System CMOS/Real Time Clock 9* 4 ACPI Mode when used 10* 5 IRQ Holder for PCI Steering 11* 6 IRQ Holder for PCI Steering 12* 7 PS/2 Compatible Mouse Port 13 8 Numeric Data Processor 14* 9 Primary IDE Channel 15* 10 Secondary IDE Channel
3. H/W SETUP
Expansion Cards
*These IRQs are usually available for PCI devices.
Interrupt Request Table for this Motherboard
INT-A INT-B INT-C INT-D
PCI slot 1 shared —— — PCI slot 2 shared —— PCI slot 3 ——not shared AGP slot shared ——— Onboard USB controller ———not shared Onboard audio/SMBus shared
IMPORTANT: If using PCI cards on shared slots, make sure that the drivers sup­port Share IRQ or that the cards do not need IRQ assignments. Conflicts will arise between the two PCI groups that will make the system unstable or cards inop­erable.
ASUS A7V133-VM Users Manual 25
3. HARDWARE SETUP
3.7.3 Accelerated Graphics Port (AGP)
This motherboard provides an Accelerated Graphics Port (AGP) slot to support AGP graphics cards, such as an ASUS AGP-V7700 GeForce2 GTS graphics card.
CAUTION! To avoid damaging your AGP graphics card, your computer’s power
supply should be unplugged before inserting your graphics card into the slot.
Expansion Cards
3. H/W SETUP
A7V133-VM
®
A7V133-VM Accelerated Graphics Port (AGP)
26 ASUS A7V133-VM Users Manual
3. HARDWARE SETUP
3.8 External Connectors
WARNING! Some pins are used for connectors or power sources. These are
clearly distinguished from jumpers in the Motherboard Layout. Placing jumper caps over these connector pins will cause damage to your motherboard.
IMPORTANT: Ribbon cables should always be connected with the red stripe to
Pin 1 on the connectors. Pin 1 is usually on the side closest to the power connec­tor on hard drives and CD-ROM drives, but may be on the opposite side on floppy disk drives. Check the connectors before installation because there may be exceptions. IDE ribbon cable must be less than 46 cm (18 in.), with the sec­ond drive connector no more than 15 cm (6 in.) from the first connector.
1) PS/2 Mouse Connector (Green 6-pin PS2KBMS)
The system will direct IRQ12 to the PS/2 mouse if one is detected. If one is not detected, expansion cards can use IRQ12. See PS/2 Mouse Function Control in 4.4 Advanced Menu.
PS/2 Mouse (6-pin female)
Connectors
3. H/W SETUP
2) PS/2 Keyboard Connector (Purple 6-pin PS2KBMS) This connection is for a standard keyboard using an PS/2 plug (mini DIN). This connector will not allow standard AT size (large DIN) keyboard plugs. You may use a DIN to mini DIN adapter on standard AT keyboards.
PS/2 Keyboard (6-pin female)
ASUS A7V133-VM Users Manual 27
3. HARDWARE SETUP
3) Universal Serial BUS Ports 0 & 1 (Black two 4-pin USB)
Two USB ports are available for connecting USB devices. For additional USB ports, you can use the USB headers (see USB Headers later in this section) and mount it to the chassis.
USB 1
Universal Serial Bus (USB) 2
3. H/W SETUP
4) Parallel Port Connector (Burgundy 25-pin PRINTER)
Connectors
5) Monitor Output Connector (Blue 15-pin VGA)
You can enable the parallel port and choose the IRQ through Onboard Parallel Port (see 4.4.2 I/O Device Configuration). NOTE: Serial printers must be connected to the serial port.
Parallel (Printer) Port (25-pin female)
This connector is for output to a VGA-compatible device.
VGA Monitor (15-pin female)
28 ASUS A7V133-VM Users Manual
3. HARDWARE SETUP
6) Serial Port Connectors (Teal/Turquoise 9-pin COM1, 10-1 pin COM2)
One serial port is ready for a mouse or other serial devices. A second serial port is available using a serial port bracket connected from the motherboard to an expansion slot opening. See Onboard Serial Port 1/2 in 4.4.2 I/O Device Configuration for settings.
COM 1
Serial Port (9-pin male)
COM2
PIN 1
A7V133-VM
®
A7V133-VM Serial COM2 Bracket
7) Game/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)
You may connect game joysticks or game pads to this connector for playing games. Connect MIDI devices for playing or editing professional audio.
Joystick/MIDI (15-pin female)
Connectors
3. H/W SETUP
ASUS A7V133-VM Users Manual 29
Loading...
+ 67 hidden pages