Version 1.0
Published August 2018
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
e terms HDMI® and HDMI High-Denition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 6
1.4 Front Panel 8
1.5 Rear Panel 9
Chapter 2 Installation 10
2.1 Installing the CPU 11
2.2 Installing the CPU Fan and Heatsink 14
2.3 Installing Memory Modules (SO-DIMM) 15
2.4 Jumpers Setup 16
2.5 Onboard Headers and Connectors 17
2.6 Smart Switch 19
2.7 M.2 WiFi/BT Module Installation Guide 20
2.8 M.2_SSD (NGFF) Module Installation Guide (M2_1) 22
Chapter 3 Software and Utilities Operation 24
3.1 Installing Drivers 24
Chapter 4 UEFI SETUP UTILITY 25
4.1 Introduction 25
4.1.1 UEFI Menu Bar 25
4.1.2 Navigation Keys 26
4.2 Main Screen 27
4.3 Advanced Screen 28
4.3.1 CPU Conguration 29
4.3.2 DRAM Conguration 32
4.3.3 Chipset Conguration 33
4.3.4 Storage Conguration 35
4.3.5 Super IO Conguration 36
4.3.6 ACPI Conguration 37
4.3.7 USB Conguration 38
4.3.8 Trusted Computing 39
4.4 Tools 40
4.5 Hardware Health Event Monitoring Screen 41
4.6 Security Screen 42
4.7 Boot Screen 43
4.8 Exit Screen 46
Chapter 1 Introduction
ank you for purchasing Q370D4-P1 motherboard. In this documentation,
Chapter 1 and 2 contains the introduction of the motherboard and step-by-step
installation guides. Chapter 3 contains the operation guide of the soware and
utilities. Chapter 4 contains the conguration guide of the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice.
Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice.
1.1 Package Contents
Q370D4-P1 Motherboard
•
Q370D4-P1 Quick Installation Guide
•
Q370D4-P1 Support CD
•
1 x Serial ATA(SATA) Data with Power Cable (Optional)
•
1 x Screw for M.2 Socket (M2*2) (Optional)
•
1 x Screw for WiFi Module (M2*2) (Optional)
•
Q370D4-P1
English
1.2 Specications
Platform
CPU
Chipset
Memory
•
•
•
•
•
•
•
•
* Intel® vProTM Technology and Intel® Active Management
Technology 12.0 can be supported only with Intel® CoreTM
vProTM processor family
•
•
•
•
•
6.7-in x 6.8-in, 17.0 cm x 17.2 cm
Supports 8th Generation Intel® CoreTM Processors (Socket
1151)
Supports CPU up to 65W
5 Power Phase design
Supports Intel® Turbo Boost 2.0 Technology
Intel® Q370
Supports Intel® vProTM Tech nolo gy
Supports Intel® Active Management Technology 12.0
Dual Channel DDR4 Memory Technology
2 x DDR4 SO-DIMM Slots
Supports DDR4 2666/2400/2133 non-ECC, un-buered
memory
Max. capacity of system memory: 32GB
Supports Intel® Extreme Memory Prole (XMP) 2.0
Expansion
Slot
Graphics
English
1 x M.2 Socket (Key E), supports ty pe 2230 WiFi/BT module
•
Intel® UHD Graphics Built-in Visuals and the VGA outputs
•
can be supported only with processors which are GPU
integrated.
Supports Intel® UHD Graphics Built-in Visuals : Intel®
•
Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® UHD Graphics
DirectX 12
•
HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit,
•
HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode
only), MPEG2, MJPEG, VC-1 (Decode only)
2 3
Audio
Q370D4-P1
Max. shared memory 1024MB
•
* e size of ma ximum shared memory may vary from dierent
operating systems.
Four graphics output options: DisplayPort 1.2, DisplayPort
•
1.2, HDMI and D-Sub
* Supports up to 3 displays simultaneously
Supports HDMI with max. resolution up to 4K x 2K
•
(4096x2160) @ 30Hz
Supports D-Sub with max. resolution up to 1920x1200 @
•
60Hz
Supports DisplayPort 1.2 with max. resolution up to 4K x 2K
•
(4096x2304) @ 60Hz
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
•
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
Supports HDCP with HDMI and DisplayPort 1.2 Ports
•
Supports 4K Ultra HD (UHD) playback with HDMI and
•
DisplayPort 1.2 Ports
Realtek ALC233-VB2 Audio Codec
•
1 x Headphone/Headset Jack
•
1 x MIC-In
•
LAN
Front
Panel I/O
Gigabit LAN 10/100/10 00 Mb/s
•
Giga PHY Intel® I219LM
•
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
1 x Power Button
•
1 x Headphone/Headset Jack
•
2 x USB 3.1 Gen1 Type-A Ports (Supports ESD Protection)
•
2 x USB 3.1 Gen2 Type-C Ports (Supports ESD Protection)
•
1 x Microphone Input Jack
•
English
Rear Panel
I/O
Storage
Connector
1 x DC Jack (Compatible with the 19V power adapter)*
•
* Please use 90W power adapter for 65W CPU and 65W power
adapter for 35W CPU.
1 x Headphone Jack
•
1 x HDMI Port
•
2 x DisplayPort 1.2
•
4 x USB 3.1 Gen1 Ports (Support ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
•
LED)
1 x SATA3 6.0 Gb/s with Power Connector , support NCQ,
•
AHCI and Hot Plug
1 x Ultra M.2 Socket, support type 2280 M.2 SATA3 6.0 Gb/s
•
module and M.2 PCI Express module up to Gen3 x4
(32 Gb/s)*
* Supports Intel® OptaneTM Tech nolo gy
* Supports NVMe SSD as boot disks
1 x D-Sub Header
•
1 x COM Port Header
•
1 x Chassis Intrusion Header
•
1 x CPU Fan Connector (4-pin)
•
1 x Internal Speaker Header
•
1 x Mono-Out Header
•
1 x ROM Recovery Header
•
AMI UEFI Legal BIOS with multilingual GUI support
BIOS
Feature
Hardware
Monitor
English
•
ACPI 6.0 Compliant wake up events
•
SMBIOS 2.7 Support
•
CPU Temperature Sensing
•
CPU Fan Tachometer
•
CPU Quiet Fan (Auto adjust chassis fan speed by CPU
•
temperature)
CPU Fan Multi-Speed Control
•
CASE OPEN detection
•
Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
•
4 5
Microso® Windows® 10 64-bit
OS
Certications
Please realiz e that the re is a certain r isk involved with o verclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-party
overclocking to ols. O verclocking may aect your system’s stability, or even c ause damage to
the components and devices of your system. It should be don e at your ow n risk and expense.
We are not responsibl e for possible damage caused by overclo cking.
•
FCC, CE
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
Q370D4-P1
English
RJ-45
2
4
5
Headset
8
6
DDR 4_A1DDR 4_A1
DDR 4_B1
HP OUT
HDMI 1
DP1
1
CI1
BIOS
ROM
M.2 W LAN
COM1
1
CPU_FAN1
3
ROM_R
SATA1
CLRMOS1
1
1
Mic In
Power
Button
1
M.2 S SD
7
MONO1
CMOS
Battery
DC Jack
BUZZER1
Q3 70D 4-P 1
USB 3.1 Gen1
T: USB31_TA_1
USB 3.1 Gen2
B: USB31_TC_1
USB 3.1 Gen1
T: USB31_TA_2
USB 3.1 Gen2
B: USB31_TC_2
USB 3.1 Gen1
T: USB3
B: USB4
DP2
USB 3.1 Gen1
T: USB1
B: USB2
VGA1
1
9
1.3 Motherboard Layout
English
6 7
No. Description
1 Clear CMOS Jumper (CLR MOS1)
2 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)
3 CPU Fan Connector (CPU_FAN1)
4 2.5W Mono Out Speaker Header (MONO1)
5 SATA3 Connector (SATA0)
6 ROM Recovery Header (ROM_R)
7 Chassis Intrusion Header (CI1)
8 COM Port Header (COM1)
9 D-Sub Header (VGA1)
Q370D4-P1
English
1.4 Front Panel
1
No. Description No. Description
1 Power Button (S W1) 5 USB 3.1 Gen2 Type-C Port
2 USB 3.1 Gen1 Type-A Port (USB31_TA_1) (USB31_TC_2)
3 USB 3.1 Gen2 Type-C Port (USB31_TC_1) 6 Microphone Input (AUDIO2)
4 USB 3.1 Gen1 Type-A Port (USB31_TA_2) 7 Headphone/Headset Jack
2
3 5
4
7
6
English
8 9
1.5 Rear Panel
Q370D4-P1
1 2 3
4 5 6 7 8
No. Description No. Description
1 Headphone Jack 5 LAN RJ-45 Port*
2 DisplayPorts 1.2 (DP1) 6 USB 3.1 Gen1 Ports (USB3_34)
3 DisplayPorts 1.2 (DP2) 7 USB 3.1 Gen1 Ports (USB3_12)
4 HDMI Port 8 DC Jack
* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
LAN Por t
SPEED LED
ACT/LINK LED
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection
Blinking Data Activity Green 100Mbps connection
On Link Orange 1Gbps connection
English
Chapter 2 Installation
is is a Proprietary form factor motherboard. Before you install the motherboard,
study the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard
•
components. Failure to do so may cause physical injuries and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
English
10 11
2.1 Installing the CPU
1. Before you insert the 1151-Pin CPU into the socket, please check if the P nP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the sock et. Do not
force to in sert the CPU into the socket if above situation is found . Otherwise, the CPU
will be seriously damaged.
2. Unplug all power c ables before in stalling the CPU.
1
Q370D4-P1
A
B
2
English
Loading...