ASRock IMB-380-L, IMB-380-D Owner's Manual

IMB-380-D
IMB-380-L
User Manual
Version 1.0
Published July 2013
Copyright©2013 ASRock INC. All rights reserved.
1
Version 1.0
Copyright©2013 ASRock INC. All rights reser ved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or tness for a particular purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
e terms HDMITM and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Ma nagement Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance. “Perchlorate Material-special handling may apply, see w ww.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
2
Contents
1 Introduction ....................................................... 5
1.1 Package Contents ......................................................... 5
1.2 Specications (IMB-380-D) ............................................ 6
1.3 Specications (IMB-380-L) ............................................ 8
1.4 Motherboard Layout (IMB-380-D / IMB-380-L) .............. 10
1.5 I/O Panel (IMB-380-D) ................................................... 12
1.6 I/O Panel (IMB-380-L) .................................................... 13
2 Installation ......................................................... 14
2.1 Screw Holes ................................................................... 14
2.2 Pre-installation Precautions ........................................... 14
2.3 Installation of Memory Modules (DIMM) ........................ 15
2.4 Expansion Slots ............................................................ 17
2.5 Jumpers Setup ............................................................... 18
2.6 Onboard Headers and Connectors ................................ 20
2.7 Driver Installation Guide ............................................ 25
3 UEFI SETUP UTILITY ......................................... 26
3.1 Introduction .................................................................... 26
3.1.1 UEFI Menu Bar .................................................... 26
3.1.2 Navigation Keys ................................................... 27
3.2 Main Screen ................................................................... 27
3.3 Advanced Screen ........................................................... 28
3.3.1 CPU Conguration ............................................... 29
3.3.2 Chipset Conguration........................................... 31
3.3.3 Storage Conguration .......................................... 33
3.3.4 Intel(R) Rapid Start Technology ........................... 34
3.3.5 Intel(R) Smart Connect Technology ..................... 35
3.3.6 AMT Conguration ............................................... 36
3.3.7 Super IO Conguration ........................................ 38
3.3.8 ACPI Conguration............................................... 39
3.3.9 USB Conguration ............................................... 40
3.3.10 Voltage Conguration .......................................... 41
3.4 Hardware Health Event Monitoring Screen ................... 42
3.5 Boot Screen ................................................................... 43
3.6 Security Screen ............................................................. 45
3.7 Exit Screen .................................................................... 46
3
4 Software Support .............................................. 47
4.1 Install Operating System ................................................ 47
4.2 Support CD Information ................................................. 47
4.2.1 Running Support CD ............................................ 47
4.2.2 Drivers Menu ........................................................ 47
4.2.3 Utilities Menu........................................................ 47
4.2.4 Contact Information .............................................. 47
4
Chapter 1: Introduction
Thank you for purchasing ASRock IMB-380-D / IMB-380-L motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control. It
delivers excellent performance with robust design conforming to ASRock’s commit-
ment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-
by-step guide to the hardware installation. Chapter 3 and 4 contain the conguration
guide to BIOS setup and information of the Support CD.
Because the motherboard specications and the BIOS software might be
updated, the content of this manual will be subject to change without no-
tice. In case any modications of this manual occur, the updated version
will be available on ASRock website without further notice. You may nd
the latest VGA cards and CPU support lists on ASRock website as well.
ASRock website http://www.asrock.com
If you require technical support related to this motherboard, please visit
our website for specic information about the model you are using.
www.asrock.com/support/index.asp
1.1 Package Contents
ASRock IMB-380-D / IMB-380-L Motherboard
(Micro ATX Form Factor: 9.6-in x 9.6-in, 24.4 cm x 24.4 cm)
ASRock IMB-380-D / IMB-380-L Driver CD
ASRock IMB-380-D / IMB-380-L Jumper setting instruction
1 x I/O Panel Shield
5
1.2 Specications (IMB-380-D)
Form Factor
Processor System
Expansion Slot
Memory
Graphics
Ethernet
SATA
Rear I/O
Dimensions Micro-ATX (9.6-in x 9.6-in)
CPU
Core Number Max Speed (By CPU) L3 Cache (By CPU) Chipset Q87 BIOS UEFI PCI 2 Mini-PCIe 1 (Full Size + USB 2.0) mSATA 1 PCIe 1 (x16)+ 1 (x4) CFast Card
Socket
Technology
Max. 32GB Socket 4 x Long DIMM Controller Intel® HD Graphics (By CPU) VRAM Shared Memory VGA No LVDS No HDMI Supports HDMI 1.4a, max resolution 1920x1200 DVI Supports max resolution 1920x1200 DisplayPort Supports max resolution 2560x1600 Multi Display Yes (Three Display) Ethernet 10/100/1000 Mbps
Controller
Connector 2 x RJ-45 Max Data
Transfer
Rate VGA 0 DVI 1 (DVI-I) HDMI 1 DisplayPort 1 Ethernet 2
Socket LGA1150 for Intel® Core i7/i5/i3/Celeron
(Haswell)
(By CPU, Max 4)
0
Dual Channel DDR3 1066/1333/1600 MHz
SDRAM
GbE LAN1:Intel® I210, LAN2: Intel® I217LM (with
v-Pro support)
2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s), Supports RAID 0/1/5
6
USB
Audio 3 (Mic-In, Line-Out, Line-In) Serial 2 (RS-232/422/485)
PS/2 1 (Combo)
USB
LVDS/
Inverter VGA 0 Serial
Internal Connector
Watchdog Timer
Power Requirements
Environment Temperature 0ºC – 60ºC
SATA 4 x SATA3 (6.0Gb/s), Supports RAID0/1/5
mPCIe 1 Parallel 1 mSATA 1 IrDA 0
GPIO 8-bit 4 x GPI + 4 x GPO SATA PWR Output Con
Speaker Header
Output Output from super I/O to drag RESETCON# Interval 256 Segments, 0,1,2…255 Sec/Min
Input PWR ATX PWR (8 + 24)
Power On
6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
- 6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
- 1 Vertical Type A USB Connector
0
4 (RS-232)
2
1
AT/ATX Supported
-AT : Directly PWR on as power input ready
-ATX : Press button to PWR on after power
input ready
7
1.3 Specications (IMB-380-L)
Form Factor
Processor System
Expansion Slot
Memory
Graphics
Ethernet
SATA
Rear I/O
Dimensions Micro-ATX (9.6-in x 9.6-in)
CPU
Core Number Max Speed (By CPU) L3 Cache (By CPU) Chipset Q87 BIOS UEFI PCI 2 Mini-PCIe 1 (Full Size + USB 2.0) mSATA 1 PCIe 1 (x16)+ 1 (x4) CFast Card
Socket
Technology
Max. 32GB Socket 4 x Long DIMM Controller Intel® HD Graphics (By CPU) VRAM Shared Memory VGA No LVDS 24 bit daul channel HDMI Supports HDMI 1.4a, max resolution 1920x1200 DVI No DisplayPort No Multi Display Yes (Three Display) Ethernet 10/100/1000 Mbps
Controller
Connector 2 x RJ-45 Max Data
Transfer
Rate VGA 1 DVI 0 HDMI 1 DisplayPort 0 Ethernet 2
Socket LGA1150 for Intel® Core i7/i5/i3/Celeron
(Haswell)
(By CPU, Max 4)
0
Dual Channel DDR3 1066/1333/1600 MHz
SDRAM
GbE LAN1:Intel® I210, LAN2: Intel® I217LM (with
v-Pro support)
2 x SATA2 (3.0Gb/s), 2 x SATA3 (6.0Gb/s), Supports RAID 0/1/5
8
USB
Audio 3 (Mic-In, Line-Out, Line-In) Serial 2 (RS-232/422/485)
PS/2 1 (Combo)
USB
LVDS/
Inverter VGA 0 Serial
Internal Connector
Watchdog Timer
Power Requirements
Environment Temperature 0ºC – 60ºC
SATA 4 x SATA3 (6.0Gb/s), Supports RAID0/1/5
mPCIe 1 Parallel 1 mSATA 1 IrDA 0
GPIO 8-bit 4 x GPI + 4 x GPO SATA PWR Output Con
Speaker Header
Output Output from super I/O to drag RESETCON# Interval 256 Segments, 0,1,2…255 Sec/Min
Input PWR ATX PWR (8 + 24)
Power On
6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
- 6 (4 x USB 3.0 compliant, 2 x USB 2.0 compliant)
- 1 Vertical Type A USB Connector
1
4 (RS-232)
2
1
AT/ATX Supported
-AT : Directly PWR on as power input ready
-ATX : Press button to PWR on after power
input ready
9
1.4 Motherboard Layout (IMB-380-D / IMB-380-L)
ATXP WR 1
I ntel
Q 87
DDR 3_A 2 ( 64 bit , 2 40- pin mod ule )
DDR 3_A 1 ( 64 bit , 2 40- pin mod ule )
DDR 3_B 2 ( 64 bit , 2 40- pin mod ule )
DDR 3_B 1 ( 64 bit , 2 40- pin mod ule )
PCI1
PCI2
PCIE1
PCIE2
1
HD_AUDI O1
COM6
1
COM5
1
COM3
1
COM4
1
CMO S
Bat ter y
HDLED R ESET
PLED PWRBTN
PANEL1
1
Supe r
I/O
SATA_5
SATA_1
SATA_2 SATA_6
CLRCMOS 1
1
CHA_FAN2
64Mb BIOS
CPU_FAN1
CPU_FAN2
24. 4c m (9 .6 in )
24. 4c m (9 .6 in )
USB6_7
1
USB8_9
1
1
CI2
1
CI1
JGPIO_PW R1
1
1
LPT1
Top: RJ-4 5
USB 3 .0 T: USB0 B: US B1
Top: RJ-4 5
USB 3 .0 T: USB4 B: US B5
USB 2 .0 T: USB2 B: US B3
HDMI
1
LVDS1
BLT_PWR1
1
BLT_VOL1
1
BUZZ 1
Top:
Line In
Cent er:
Line Out
Bott om:
Mic I n
MIN I_ SATA1
MIN I_ PC IE 1
SPEAKER _OUT1
1
USB12
1
JGPIO1
COM 2
DVI 1/V GA1
1*
2
3
4
5
6
7
9
10
118
12
13
14
16
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
313233343536
37*
38
39
40
41
42
43
RoH S
IM B- 380
COM 1
PS2
Keybo ard
/Mous e
DISP LAY1
PNL_PWR1
1
BKT_PWR1
1
ATX12V 1
PWR_JP1
1
USB10_11
1
AUDIO CODEC
CHA_FAN1
1
BLT_PWM1
TPM1
1
10
1* : LVDS Panel Connector (For IMB-380-L only)
2 :
Backlight PWM Header
3 : Inverter Power control Wafer
4 : Backlight & Amp Volume Control 5 :
8-pin ATX Power Input Connector
6
: Backlight Power Selection 7 : Panel Power Selection 8 :
3-Pin CPU FAN Connector
9 :
4-Pin CPU FAN Connector
10 : Buzzer 11 : DDR3 DIMM Slots (DDR3_A1, DDR3_B1) 12 : DDR3 DIMM Slots (DDR3_A2, DDR3_B2) 13 : 24-pin ATX Power Input Connector 14 : RS-232 Port 4 Pin Header (COM5) 15 : RS-232 Port 4 Pin Header (COM6) 16 : RS-232 Port 4 Pin Header (COM4) 17 : RS-232 Port 4 Pin Header (COM3)
18 : mini-PCIE Slot
19 : Digital Input / Output Pin Header 20 : Digital Input / Output Power select 21 : ATX/AT mode Selection 22 : TPM Header 23 : mini-SATA Slot
24 :
System Panel Header
25 : SATA3 Connector (SATA_5) 26 : SATA3 Connector (SATA_6) 27 : SATA3 Connector (SATA_2) 28 : SATA3 Connector (SATA_1)
29 : Printer Port Header
30 : USB2.0 Port (USB12)
31 :
USB2.0 Header (
32 :
USB2.0 Header (
33 :
USB2.0 Header 34 : Chassis Intrusion Header 1 35 : Chassis Intrusion Header 2 36 :
Front Panel Audio Header
37* : 3W Audio AMP Output Wafer 38 : PCIE Slot (PCIE x4)
39 : PCI Slots
40 : PCIE Slot (PCIE x16) 41 : Clear CMOS Header
42 :
4-Pin Chassis FAN Connector 43 :
3-Pin Chassis FAN Connector
USB10_11) USB8_9)
(USB6_7)
(For IMB-380-L only)
11
1.5 I/O Panel (IMB-380-D)
1
2
5
3
4
6
7
8
13
14
1 COM Port (COM1)
2 COM Port (COM2)
* 3 LAN RJ-45 Port
4 USB 2.0 Ports (USB23)
* 5 LAN RJ-45 Port
6 Line In (Light Blue)
7 Line out (Lime)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
Activity/Link LED SPEED LED
Status Description Status Description
12
LAN Port LED Indications
11
10
8 Microphone (Pink)
9 USB 3.0 Ports (USB_45)
10 HDMI Port (HDMI1)
11 USB 3.0 Ports (USB_01)
12 DVI Port (DVI1)
13 PS/2 Mouse/Keyboard Port
14 DisplayPort (DP1)
9
ACT/LINK
LED
SPEED
LED
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
LAN Port
12
1.6 I/O Panel (IMB-380-L)
1
2
5
3
4
6
7
8
13
1 COM Port (COM1)
2 COM Port (COM2)
* 3 LAN RJ-45 Port
4 USB 2.0 Ports (USB23)
* 5 LAN RJ-45 Port
6 Line In (Light Blue)
7 Line out (Lime)
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
Activity/Link LED SPEED LED
Status Description Status Description
12
LAN Port LED Indications
11
8 Microphone (Pink)
9 USB 3.0 Ports (USB_45)
10 HDMI Port (HDMI1)
11 USB 3.0 Ports (USB_01)
12 VGA Port (VGA1)
13 PS/2 Mouse/Keyboard Port
910
ACT/LINK
LED
SPEED
LED
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
LAN Port
13
Chapter 2: Installation
This is a Micro ATX form factor (9.6” x 9.6”, 24.4 x 24.4 cm) motherboard. Before
you install the motherboard, study the conguration of your chassis to ensure that
the motherboard ts into it.
motherboard. Failure to do so may cause physical injuries to you and
damages to motherboard components.
Make sure to unplug the power cord before installing or removing the
2.1 Screw Holes
Place screws into the holes to secure the motherboard to the chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity,
NEVER place your motherboard directly on the carpet or the like. Also
remember to use a grounded wrist strap or touch a safety grounded object
before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.
14
2.3 Installation of Memory Modules (DIMM)
This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM
slots, and supports Dual Channel Memory Technology.
1. For dual channel conguration, you always need to install identical
(the same brand, speed, size and chip-t ype) DDR3 DIMM pair s.
2. It is unable to activate Dual Channel Memor y Technology with
only one or three memory module installed.
3. It is not allowed to install a DDR or DDR 2 memor y module into a
DDR3 slot; otherwise, this motherboard and DIMM may be dam-
aged.
Dual Channel Memory Conguration
Priority DDR3_A1 DDR3_ A2 DDR3_B1 DDR3_B2
1 Populated Populated 2 Populated Populated 3 Populated Populated Populated Populated
The DIMM only ts in one correct orientation. It will cause permanent
damage to the motherboard and the DIM M if you force the DIMM into
the slot at incorrect orientation.
15
Loading...
+ 32 hidden pages