Asrock A320TM-ITX User Manual

Version 1.0
Published February 2019
is device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 6
1.4 I/O Panel 8
Chapter 2 Installation 9
2.1 Installing the CPU 10
2.2 Installing the CPU Fan and Heatsink 12
2.3 Installing Memory Modules (SO-DIMM) 14
2.4 Jumpers Setup 16
2.5 Onboard Headers and Connectors 18
2.6 M.2 WiFi/BT Module Installation Guide 22
2.7 M.2_SSD (NGFF) Module Installation Guide 24
Chapter 3 Software and Utilities Operation 29
3.1 Installing Drivers 29
Chapter 4 UEFI SETUP UTILITY 30
4.1 Introduction 30
4.1.1 UEFI Menu Bar 30
4.1.2 Navigation Keys 31
4.2 Main Screen 32
4.3 OC Tweaker Screen 33
4.4 Advanced Screen 35
4.4.1 CPU Conguration 36
4.4.2 North Bridge Conguration 37
4.4.3 South Bridge Conguration 38
4.4.4 Storage Conguration 39
4.4.5 Super IO Conguration 40
4.4.6 ACPI Conguration 41
4.4.7 Trusted Computing 42
4.4.8 AMD CBS 43
4.4.9 AMD PBS 44
4.5 Tools 45
4.6 Hardware Health Event Monitoring Screen 46
4.7 Security Screen 47
4.8 Boot Screen 48
4.9 Exit Screen 50
Chapter 1 Introduction
ank you for purchasing A320TM-ITX motherboard. In this documentation,
Chapter 1 and 2 contains the introduction of the motherboard and step-by-step
installation guides. Chapter 3 contains the operation guide of the soware and
utilities. Chapter 4 contains the conguration guide of the BIOS setup.
Becau se the motherboard specications and the BIOS soware might be updated, the content of this documentation will be subject to change without notice.
1.1 Package Contents
A320TM-ITX Motherboard (in Mini-ITX Form Factor)
•
A320TM-ITX Quick Installation Guide (Optional)
•
1 x in-Mini ITX I/O Shield (Optional)
•
1 x Mini ITX I/O Shield (Optional)
•
1 x Serial ATA (SATA) Data Cable (Optional)
•
1 x SATA Power Cable (Optional)
•
2 x Screws for M.2 Sockets (M2*2) (Optional)
•
A320TM-ITX
English
1
1.2 Specications
Platform
CPU
Chipset
Memory
•
•
•
*Please refer to the "CPU Support List" on ASRock's website for
more information.
•
•
•
•
•
•
•
•
* Be sure to install the memory module into the DDR4_A2 slot
as rst priority; otherwise, the system may not boot up properly
or may operate incorrectly.
•
in Mini-ITX Form Factor
Solid Capacitor design
Supports AMD AM4 Socket CPUs (Picasso, Raven Ridge,
Bristol Ridge, up to 65W)
Digi Power design
5 Power Phase design
Supports CPU up to 65W
Supports LGA115x CPU Cooler
AMD Promontory A320
2 x DDR4 SO-DIMM Slots
AMD Ryzen series CPUs (Raven Ridge) support DDR4
2933/2667/2400/2133 non-ECC, un-buered memory*
AMD 7th Gen A-Series APUs support DDR4 2133/1866 non-
ECC, un-buered memory*
Max. capacity of system memory: 64GB
English
2
Expansion Slot
Graphics
1 x M.2 Socket (Key E), supports ty pe 2230 WiFi/BT module
•
Integrated AMD RadeonTM Vega Series Graphics in Ryzen
•
Series APU*
Integrated AMD RadeonTM R-Series Graphics in A-series
•
APU*
* Actual support may vary by CPU
DirectX 12, Pixel Shader 5.0
•
Shared memory default 2GB. Max Shared memory supports
•
up to 16GB.
* e Max shared memory 16GB requires 32GB system memory
installed.
Audio
LAN
Dual graphics output: support HDMI and LVDS ports by
•
independent display controllers
Supports 2 x HDMI 1.4 with max. resolution up to 4K x 2K
•
(4096x2160) @ 24Hz / (3840x2160) @ 30Hz
HDMI x 1 port ( Rear )
HDMI x 1 port (Side)
Supports LVDS with max. resolution up to 1920x1200 @ 60Hz
•
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
•
HBR (High Bit Rate Audio) with HDMI 1.4 Ports (Compliant
HDMI monitor is required)
Supports HDCP 1.4 with HDMI 1.4 Port
•
Supports Full HD 1080p Blu-ray (BD) playback with HDMI 1.4
•
Ports
Realtek ALC233 Audio Codec
•
1 x Headphone Jack
•
1 x MIC-In
•
PCIE x1 Gigabit LAN 10/100/1000 Mb/s
•
Realtek RTL8111GR / RTL8111H
•
Supports Wake-On-LAN
•
Supports Lightning/ESD Protection
•
Supports Energy Ecient Ethernet 802.3az
•
Supports PXE
•
A320TM-ITX
I/O
1 x DC Jack (Compatible with the 19V power adapter)
•
1 x Serial Port: COM
•
2 x HDMI Ports: HDMI1 (Rear), HDMI2 (Side)
•
4 x USB 3.1 Gen1 Ports (Supports ESD Protection)
•
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
•
LED)
HD Audio Jacks: Front Speaker / Microphone
•
English
3
Storage
12
Connector
1 x SATA3 6.0 Gb/s Connector, supports NCQ, AHCI and Hot
•
Plug
1 x Ultra M.2 Socket, supports M Key type 2260/2280 M.2
•
SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s)*
* Supports NVMe SSD as boot disks
1 x Panel Power Jumper
•
1 x Backlight Power Jumper
•
1 x Panel Disable Jumper
•
Short
Panel (LVDS) a s video output
HDMI1 and HDMI2 a s video output
1 x Backlight Control Header
•
1 x LVDS Connector
•
2 x CPU Fan Connectors (4-pin)
•
[Def ault]
Open
O
X
(Priority)
O
(Aer
O
entering
OS)
* e CPU Fan Connectors support the CPU fan of maximum 1A
(12W) fan power.
1 x 4 pin 19V Power Connector
•
1 x Front Panel Audio Connector
•
1 x Internal Speaker Header (4-Pin)
•
1 x SATA Power Connector
•
2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD
•
Protection)
English
4
BIOS Feature
AMI UEFI Legal BIOS with GUI support
•
Supports "Plug and Play"
•
ACPI 5.1 compliance wake up events
•
Supports jumperfree
•
SMBIOS 2.3 support
•
CPU, DRAM, PCH 1.05V, PROM 2.5V, Voltage Multi-
•
adjustment
CPU Temperature Sensing
Hardware Monitor
OS
Power
Certica­tions
Please realiz e that the re is a certain r isk involved with o verclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-party overclocking to ols. O verclocking may aect your system’s stability, or even c ause damage to the components and devices of your system. It should be don e at your ow n risk and expense. We are not responsibl e for possible damage caused by overclo cking.
•
CPU Fan Tachometer
•
CPU Quiet Fan (Auto adjust chassis fan speed by CPU
•
temperature)
CPU Fan Multi-Speed Control
•
Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
•
Microso® Windows® 10 64-bit
•
1 x DC Jack (Supports 19V DC Power Adapters)
•
FCC, CE
•
ErP/EuP ready (ErP/EuP ready power supply is required)
•
A320TM-ITX
English
5
1.3 Motherboard Layout
12
Audio
CODEC
1
USB_4_5
HDLED RESET
PLED PWRBTN
PANEL1
1
COM1
14
DC Jack
HDMI 1
HDMI2
Supe r
I/O
BIOS ROM
M.2 WiFi
M.2 SSD
CPU_FAN2
CPU_FAN1
8
SOCKETAM4
A320TM-ITX
RoHS
16
15
10
DDR4_A2
DDR4_A1
SATA_1
1
SATAPWR1
Plug DDR4_A2 First
2
Ultra M.2
PCIe Gen3 x4
CLRCMOS1
1
PANEL_ DISABLE1
1
4
1
USB_6_7
5 6
LVDS 1
BKT_PWR1
1
1
BLT_VOL1
VCC_PWR_SEL
1
7
11
13
31
11
SPK_OUT1
1
USB 3.1 Gen1 T: USB2 B: USB3
USB 3.1 Gen1 T: USB0 B: USB1
RJ-45
Headphone
Mic In
ATX_PWR1
1
HD_AUDIO1
17
9
Short
9
Panel (LVDS) as video output
HDMI1 and HDMI2 as video output
[Default]
X
O
Open
O
(Priority)
O
entering OS)
English
6
No. Description
12
1 4 pin 19V Power Connector (ATX_PWR1)
2 SATA3 Connector (SATA_1)
3 SATA Power Connector (SATAPWR1)
4 Clear CMOS Jumper (CLRCMOS1)
5 USB 3.0 Header (USB3_4_5)
6 USB 3.0 Header (USB3_6_7)
7 Back light Power Jumper (BKT_PWR1)
8 Back light Control Header (B LT_VOL1)
Panel Disable Jumper (PANEL _DISABLE1)
A320TM-ITX
9
Panel (LVDS) a s video output
HDMI1 and HDMI2 a s video output
Short
[Def ault]
Open
O
X
(Priority)
O
(Aer
O
entering
OS)
10 Panel Power Jumper (VCC_PWR_SEL)
11 LVDS Connector (LVDS1)
12 2 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_A2)
13 CPU Fan Connector (CPU_FAN1)
14 CPU Fan Connector (CPU_FAN2)
15 System Panel Header (PANEL1)
16 Internal Speaker Header (SPK_OUT1)
17 Front Panel Audio Header (HD_AUDIO1)
English
7
1.4 I/O Panel
No. Description No. Description
1 DC Jack** 5 LAN RJ-45 Port*
2 HDMI Port (HDMI1) 6 USB 3.1 Gen1 Port (USB3_01)
3 COM Port 7 Microphone (Pink)
4 USB 3.1 Gen1 Port (USB3_23) 8 Front Speaker (Lime)
*ere are two LEDs on each LAN port. Plea se refer to the table below for the LA N port LED indic ations.
ACT/LINK LED
SPEED LED
LAN Por t
Activity / Link LED Speed LED
Status Description Status Description
O No Link O 10Mbps connection Blinking Data Activity Green 100Mbps connection On Link Green 1Gbps connection
872 5431 4
English
8
** Please use a 19V power adapte r for the DC jack. is jack accepts dual barrel plugs with an inner diamete r of 2.5 mm and an outer diameter of 5. 5 mm, where the inner contact is +19 (±10%) DC and the shell is (centre pos itive).
DELTA DELTA-ADP-150TB-150W/19V
HP HP-TBC-BA52-150W/19V
FSP FSP-FSP150-ABAN1-150W/19V
DELL FA130PE1- 00-130W/19.5V
DELL LA90PE0-01-90W/19.5V
DELTA DELTA-AD P-180TB -180W/19V
FSP FSP-FSP18 0-ABB N3-180W/19V
is motherboard is available with support for either 4-pin ATX 19V power or DC-in power supplies. Please do not use two kinds of power supplie s at the same time! Doing so may damage the motherboard component s and devices. When you u se the DC-in power adapter, please use the onboard SATA power connector to get the powe r for HDDs.
Chapter 2 Installation
is is a in Mini-ITX form factor motherboard. Before you install the
motherboard, study the conguration of your chassis to ensure that the
motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
•
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboard’s components,
•
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
•
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not over-
•
tighten the screws! Doing so may damage the motherboard.
A320TM-ITX
English
9
2.1 Installing the CPU
Unplug all power cables be fore installing the CPU.
1
English
10
2
A320TM-ITX
3
11
English
2.2 Installing the CPU Fan and Heatsink
1
Aer you install the CPU into this motherboard, it is necessary to install a larger
heatsink and cooling fan to dissipate heat. You also need to spray thermal grease
between the CPU and the heatsink to improve heat dissipation. Ma ke sure that the
CPU and the heatsink are securely fastened and in good contact with each other.
Please turn o the power or remove th e power cord before changing a CPU or heatsink.
English
12
A320TM-ITX
1
2
4-pin FAN cable
CPU_FAN
English
13
Loading...
+ 39 hidden pages