ASRock 939NF4G-VSTA User Manual

939NF4G-VSTA
User Manual
Version 1.2
Published July 2006
Copyright©2006 ASRock INC. All rights reserved.
11
1
11
Copyright Notice:Copyright Notice:
Copyright Notice:Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means, except duplication of documentation by
the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:Disclaimer:
Disclaimer:
Disclaimer:Disclaimer:
Specifications and information contained in this manual are furnished for informa-
tional use only and subject to change without notice, and should not be constructed
as a commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this manual.
With respect to the contents of this manual, ASRock does not provide warranty of
any kind, either expressed or implied, including but not limited to the implied warran-
ties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the manual or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
22
2
22
ContentsContents
Contents
ContentsContents
1.1.
IntroductionIntroduction
1.
Introduction
1.1.
IntroductionIntroduction
1.1 Package Contents ..................................................................... 5
1.2 Specifications ........................................................................... 6
1.3 Minimum Hardware Requirement Table for Windows® Vista
Premium and Basic Logo .......................................................... 9
1.4 Motherboard Layout ................................................................. 10
1.5 HD 8CH I/O ................................................................................ 11
2.2.
InstallationInstallation
2.
Installation
2.2.
InstallationInstallation
Pre-installation Precautions ............................................................... 12
2.1 CPU Installation ......................................................................... 13
2.2 Installation of CPU Fan and Heatsink ....................................... 13
2.3 Installation of Memory Modules (DIMM) .................................... 14
2.4 Expansion Slots (PCI, PCI Express, and HDMR Slots) .................... 16
2.5 Easy Multi Monitor Feature........................................................ 16
2.6 Jumpers Setup .......................................................................... 17
2.7 Onboard Headers and Connectors.......................................... 17
2.8 SATAII Hard Disk Setup Guide .................................................. 22
2.9 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks
Installation ................................................................................. 23
2.10 Hot Plug and Hot Swap Functions for SATA / SATAII HDDs .... 23
2.11 Driver Installation Guide ............................................................ 23
2.12 HDMR Card and Driver Installation ............................................ 24
2.13 Installing Windows® 2000 / XP / XP 64-bit / VistaTM Without RAID
Functions .................................................................................. 24
2.14 Installing Windows® 2000 / XP / XP 64-bit / VistaTM With RAID
Functions. ................................................................................. 24
2.15 Untied Overclocking Technology .............................................. 25
3.3.
BIOS SBIOS S
3.
BIOS S
3.3.
BIOS SBIOS S
3.1 Introduction ............................................................................... 26
3.2 Main Screen .............................................................................. 27
3.3 Advanced Screen .................................................................... 28
ETUP UTILITYETUP UTILITY
ETUP UTILITY
ETUP UTILITYETUP UTILITY
3.1.1 BIOS Menu Bar ............................................................... 26
3.1.2 Navigation Keys ............................................................. 27
3.3.1 CPU Configuration .......................................................... 28
3.3.2 Chipset Configuration ..................................................... 31
3.3.3 ACPI Configuration ......................................................... 32
3.3.4 IDE Configuration ............................................................ 33
3.3.5 PCIPnP Configuration ...................................................... 35
3.3.6 Floppy Configuration ...................................................... 36
........................................................................................................................
............................................................
........................................................................................................................
............................................................................................................................
..............................................................
............................................................................................................................
......................................................................................................
...................................................
......................................................................................................
5 5
5
5 5
TM
12 12
12
12 12
26 26
26
26 26
33
3
33
3.3.7 Super IO Configuration ................................................... 36
3.3.8 USB Configuration .......................................................... 38
3.4 Hardware Health Event Monitoring Screen ............................. 38
3.5 Boot Screen.............................................................................. 39
3.5.1 Boot Settings Configuration ........................................... 39
3.6 Security Screen........................................................................ 40
3.7 Exit Screen ............................................................................... 41
4.4.
Software SupportSoftware Support
4.
Software Support
4.4.
Software SupportSoftware Support
4.1 Install Operating System ........................................................... 42
4.2 Support CD Information ............................................................. 42
4.2.1 Running Support CD ....................................................... 42
4.2.2 Drivers Menu .................................................................. 42
4.2.3 Utilities Menu ................................................................... 42
4.2.4 Contact Information ........................................................ 42
APPENDIX: AMD’s Cool ‘n’ QuietAPPENDIX: AMD’s Cool ‘n’ Quiet
APPENDIX: AMD’s Cool ‘n’ Quiet
APPENDIX: AMD’s Cool ‘n’ QuietAPPENDIX: AMD’s Cool ‘n’ Quiet
......................................................................................................
...................................................
......................................................................................................
TMTM
TM
TMTM
T T
echnologyechnology
T
echnology
T T
echnologyechnology
............
......
............
42 42
42
42 42
43 43
43
43 43
44
4
44
1.1.
IntroductionIntroduction
1.
Introduction
1.1.
IntroductionIntroduction
Thank you for purchasing ASRock 939NF4G-VSTA motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control. It de-
livers excellent performance with robust design conforming to ASRock’s commit-
ment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-
step guide to the hardware installation. Chapter 3 and 4 contain the configuration
guide to BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest VGA cards and CPU support lists on ASRock website
as well. ASRock website
1.11.1
Package ContentsPackage Contents
1.1
Package Contents
1.11.1
Package ContentsPackage Contents
1 x ASRock 939NF4G-VSTA Motherboard
(Micro ATX Form Factor: 9.6-in x 8.8-in, 24.4 cm x 22.4 cm)
1 x ASRock 939NF4G-VSTA Quick Installation Guide 1 x ASRock 939NF4G-VSTA Support CD
1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)
1 x 3.5-in Floppy Drive Ribbon Cable
1 x Serial ATA (SATA) Data Cable (Optional)
1 x Serial ATA (SATA) HDD Power Cable (Optional)
1 x HD 8CH I/O Shield
1 x COM Port Bracket
1 x HDMR Card (Optional)
http://www.asrock.com
55
5
55
1.21.2
SpecificationsSpecifications
1.2
Specifications
1.21.2
SpecificationsSpecifications
Platform - Micro ATX Form Factor: 9.6-in x 8.8-in, 24.4 cm x 22.4 cm CPU - 939-Pin Socket Supporting AMD Athlon
Processors
- Supports AMD’s Cool ‘n’ QuietTM Technology (see CAUTION 1)
- FSB 1000 MHz (2.0 GT/s)
- Supports Untied Overclocking Technology (see CAUTION 2)
- Supports Hyper-Transport Technology
Chipset - Northbridge: nVidia
- Southbridge: nVidia® nForce 410 MCP
Memory - Dual Channel DDR Memory Technology (see CAUTION 3)
- 4 x DDR DIMM slots
- Support DDR400/333/266
- Max. capacity: 4GB
Hybrid Booster - CPU Frequency Stepless Control (see CAUTION 4)
- ASRock U-COP (see CAUTION 5)
- Boot Failure Guard (B.F.G.)
Expansion Slot - 2 x PCI slots
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 1 x HDMR slot
Graphics - Integrated NV44 graphics DX9.0 VGA
- Pixel Shader 3.0
- Max. shared memory 128MB
Audio - Realtek ALC888 7.1 channel audio CODEC with High
Definition audio
LAN - Realtek PHY RTL8201CL
- Speed: 10/100 Ethernet
- Supports Wake-On-LAN
Rear Panel I/O HD 8CH I/O
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x VGA Port
- 1 x Parallel Port (ECP/EPP Support)
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 Port
- HD Audio Jack: Side Speaker/Rear Speaker/Central Bass/ Line in/Front Speaker/Microphone (see CAUTION 6)
®
GeForce 6100
TM
64 / 64FX / 64X2
66
6
66
Connector - 2 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,
RAID 1, JBOD) and “Hot Plug” functions (see CAUTION 7)
- 2 x ATA133 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- 1 x Game header
- 1 x COM port header
- CPU/Chassis FAN connector
- 20 pin ATX power connector
- 4 pin 12V power connector
- CD in header
- Front panel audio connector
- 2 x USB 2.0 headers (support 4 USB 2.0 ports) (see CAUTION 8)
BIOS Feature - 4Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- Supports jumperfree
- SMBIOS 2.3.1 Support
Support CD - Drivers, Utilities, AntiVirus Software (Trial Version) Hardware - CPU Temperature Sensing Monitor - Chassis Temperature Sensing
- CPU Fan Tachometer
- Chassis Fan Tachometer
- CPU Quiet Fan
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore
OS - Microsoft
®
Windows® 2000/XP/XP 64-bit/VistaTM compliant
(see CAUTION 9)
Certifications - FCC, CE, Microsoft
®
WHQL Certificated
77
7
77
CAUTION!
1. For power-saving’s sake, it is strongly recommended to enable AMD’s Cool ‘n’
2. This motherboard supports Untied Overclocking Technology. Please read “Un-
3. This motherboard supports Dual Channel Memory Technology. Before you
4. Although this motherboard offers stepless control, it is not recommended to
5. While CPU overheat is detected, the system will automatically shutdown.
6. For microphone input, this motherboard supports both stereo and mono modes.
7. Before installing SATAII hard disk to SATAII connector, please read the “SATAII
8. Power Management for USB 2.0 works fine under Microsoft® Windows
9. Microsoft
TM
Quiet
technology under Windows system. See APPENDIX on page 43 to
enable AMD’s Cool ‘n’ Quiet
support AMD’s Cool ‘n’ Quiet
TM
technology. Since not all K8 939-pin CPU can
TM
technology, please check AMD’s website for
details.
tied Overclocking Technology” on page 25 for details.
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 14 for proper installation.
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 11 for proper connection.
Hard Disk Setup Guide” on page 22 to adjust your SATAII hard disk drive to
SATAII mode. Besides, you are allowed to downgrade the SATAII hard disk to
SATA hard disk (from SATAII 3Gb/s down to SATA 1.5Gb/s), and connect it to
the SATAII connector. You can also connect SATA hard disk to SATAII connec-
tor directly.
®
VistaTM / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
®
Windows® VistaTM driver is not ready yet. We will update it to our
website in the future. Please visit our website for Microsoft
®
Windows® Vista
driver and related information.
ASRock website
http://www.asrock.com
TM
88
8
88
1.31.3
Minimum Hardware RMinimum Hardware R
1.3
Minimum Hardware R
1.31.3
Minimum Hardware RMinimum Hardware R
TMTM
TM
TMTM
VistaVista
Vista
VistaVista
For system integrators and users who purchase this motherboard and
plan to submit Windows® VistaTM Premium and Basic logo, please follow the
below table for minimum hardware requirement. Please adopt the CPU,
memory, and VGA that we suggest.
CPU Athlon 3000+
Memory 512MB x 2 Dual Channel (DDR400) (Premium)
* If you use onboard VGA with total system memory size 512MB and plan to
submit Windows® VistaTM Basic logo, please adjust the shared memory size of onboard
VGA to 64MB. If you use onboard VGA with total system memory size above 512MB
and plan to submit Windows® VistaTM Premium and Basic logo, the shared memory size
of onboard VGA can be adjusted up to 128MB.
* If you plan to use external graphics card on this motherboard, please refer to Premium
Discrete requirement at
Premium and Basic Logo Premium and Basic Logo
Premium and Basic Logo
Premium and Basic Logo Premium and Basic Logo
512MB Single Channel (Basic)
256MB x 2 Dual Channel (Basic)
equirement Tequirement T
equirement T
equirement Tequirement T
http://www.asrock.com
able for Wable for W
able for W
able for Wable for W
indowsindows
indows
indowsindows
®®
®
®®
99
9
99
1.4 Motherboard Layout1.4 Motherboard Layout
1.4 Motherboard Layout
1.4 Motherboard Layout1.4 Motherboard Layout
30
29
28 27
31
PS2
Mouse
Keyboard
USB2.0 T:USB2 B:USB3
USB2.0 T:USB0 B:USB1
CTR BASS
MIC IN
PS2
VGA1
Bottom:
Bottom:
Center:
SIDE SPK
Center:
FRONT
1
PS2_USB_PW1
PARALLEL PORT
Top: RJ-45
Top:
REAR SPK
Top:
LINE IN
LAN PHY
CD1
AUDIO CODEC
HD_AUDIO1
1
26
1
1
Super
3
2
4
5
6
7
22.4cm (8.8-in)
Dual Channel
ATX12V1
FSB1GHz
SOCKET 939
COM1
PCI
RAID
EXPRESS
nVidia
24
PCIE1
PCI 1
PCI 2
GAME1
1
23
GeForce 6100
Chipset
USB2.0
4Mb
BIOS
FLOPPY1
22
BATTERY
21
CMOS
SATAII
ATXPWR1
RoHS
I/O
PCIE2
7.1CH HD
HDMR1
25
CPU_FAN1
CLRCMOS1
1
20
DDR400
IDE2
939NF4G-VSTA
FSB800
FSB800
DDR2(64/72 bit, 184-pinmodule)
DDR4(64/72 bit, 184-pinmodule)
DDR1(64/72 bit, 184-pinmodule)
DDR3(64/72 bit, 184-pinmodule)
Dual CoreCPU
`
ATA133
nVidia
nForce
410 MCP
Chipset
SPEAKER1
1
IR1
USB45
1
19
18
PLEDPWRBTN
USB67
PANEL1
1
1
HDLED RESET
17
16
8
IDE1
9
24.4cm (9.6-in)
10 11
SATAII_2
12
SATAII_1
13 14
15
CHA_FAN1
1 PS2_USB_PW1 Jumper 16 System Panel Hea der (P ANEL1) 2 A TX 12V Power Connector (A TX12V1) 17 USB 2.0 Header (USB67, Blue) 3 North Bridge Controller 18 USB 2.0 Header (USB45, Blue) 4 CPU Heatsink Retention Module 19 Clear CMOS Jumper (CLRCMOS1) 5 939-Pin CPU Socket 20 Infrared Module Header (IR1) 6 2 x 184-pin DDR DIMM Slots 21 Floppy Connector (FLOPPY1)
(Dual Channel A: DDR1, DDR2; Blue) 22 Flash Memory
7 2 x 184-pin DDR DIMM Slots 23 Game Port Header (GAME1)
(Dual Channel B: DDR3, DDR4; Black) 24 PCI Express x1 Slot (PCIE2) 8 Secondary IDE Connector (IDE2, Black) 25 HDMR Slot (HDMR1) 9 Primary IDE Connector (IDE1, Blue) 26 Front Panel Audio Header (HD_AUDIO1) 10 CPU Fan Connector (CPU_FAN1) 27 Internal Audio Connector: CD1 (Black) 11 South Bridge Controller 28 2 x PCI Slots (PCI1- 2) 12 Secondary Serial A T AII Connector (SA T AII_2, red) 29 PCI Express x16 Slot (PCIE1) 13 Primary Serial A T AII Connector (SA T AII_1, red) 30 ATX Power Connector (ATXPWR1) 14 Chassis Speaker Header (SPEAKER 1) 3 1 Serial Port Connector (COM1) 15 Chassis Fan Connector (CHA_FAN1)
1010
10
1010
1.51.5
1.5
1.51.5
HD 8CH I/OHD 8CH I/O
HD 8CH I/O
HD 8CH I/OHD 8CH I/O
1
1213
1 Parallel Port 8 Microphone (Pink) 2 RJ-45 Port 9 USB 2.0 Ports (USB01) 3 Side Speaker (Gray) 10 USB 2.0 Ports (USB23) 4 Rear Speaker (Black) 11 V GA Port 5 Central / Bass (Orange) 12 PS/2 Keyboard Port (Purple) 6 Line In (Light Blue) 13 PS/2 Mouse Port (Green)
*7 Front Speaker (Lime)
* If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See
the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker
2 V -- -- --
4VV----
6VVV--
8VVVV
11
10
(No. 7) (No. 4) (No. 5) (No. 3)
2
3
4
5
6
7
8
9
* To enable Multi-Streaming function, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find “Mixer” tool on your system.
Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click
“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA
Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA
Audio 2nd output” to use front panel audio.
1111
11
1111
2.2.
InstallationInstallation
2.
Installation
2.2.
InstallationInstallation
939NF4G-VSTA is a Micro ATX form factor (9.6-in x 8.8-in, 24.4 cm x 22.4 cm)
motherboard. Before you install the motherboard, study the configuration of your
chassis to ensure that the motherboard fits into it.
Pre-installation PrecautionsPre-installation Precautions
Pre-installation Precautions
Pre-installation PrecautionsPre-installation Precautions
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
Before you install or remove any component, ensure that the
power is switched off or the power cord is detached from the
power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
1. Unplug the power cord from the wall socket before touching any
component.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet or
the like. Also remember to use a grounded wrist strap or touch a
safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded anti-
static pad or in the bag that comes with the component.
5. When placing screws into the screw holes to secure the motherboard
to the chassis, please do not over-tighten the screws! Doing so may
damage the motherboard.
1212
12
1212
2.12.1
CPU InstallationCPU Installation
2.1
CPU Installation
2.12.1
CPU InstallationCPU Installation
Step 1. Unlock the socket by lifting the lever up to a 90
o
angle.
Step 2. Position the CPU directly above the socket such that the CPU corner with
the golden triangle matches the socket corner with a small triangle.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push
down the socket lever to secure the CPU. The lever clicks on the side tab
to indicate that it is locked.
Lever 90° Up
STEP 1: Lift Up The Socket Lever
2.22.2
Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink
2.2
Installation of CPU Fan and Heatsink
2.22.2
Installation of CPU Fan and HeatsinkInstallation of CPU Fan and Heatsink
CPU Golden Triangle
Socket Corner
STEP 2 / STEP 3: Match The CPU Golden Triangle To The Socket Corner
STEP 4: Push Down And Lock The Socket Lever
After you install the CPU into this motherboard, it is necessary to install a
larger heatsink and cooling fan to dissipate heat. You also need to spray
thermal grease between the CPU and the heatsink to improve heat
dissipation. Make sure that the CPU and the heatsink are securely fas-
tened and in good contact with each other. Then connect the CPU fan to
the CPU FAN connector (CPU_FAN1, see Page 10, No. 10). For proper
installation, please kindly refer to the instruction manuals of the CPU fan
and the heatsink.
1313
13
1313
Loading...
+ 30 hidden pages