ARRIS DCX860 Users Manual
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including ampliers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not t into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specied by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of
time.
• Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
• The mains plug is the main disconnect device. It shall remain readily accessible
and operable.
• The apparatus shall not be exposed to dripping or splashing and no objects lled
with liquids, such as vases, shall be placed on the apparatus.
• WARNING: To reduce the risk of re or electric shock, do not expose this
apparatus to rain or moisture.
• WARNING: Batteries shall not be exposed to excessive heat such as sunshine, re
or the like.
• See label on bottom of unit for additional markings.
During Transportation to the Subscriber Home
• Transport the cable terminal in its shipping box or an equally padded container.
• Do not expose the terminal to rain or moisture.
During Installation
• Do not place the terminal in an enclosed area where the cooling vents are blocked
or impede the ow of air through the ventilation openings.
• Install the terminal so that its position does not interfere with its proper
ventilation. For example, do not place the terminal on a bed, sofa, rug, or similar
surface that could block the ventilation openings.
• Install the terminal so that there is a minimum of two inches of space between
surrounding surfaces and the top, left, and right sides of the terminal to ensure
proper ventilation.
• Install the terminal away from heat sources such as radiators, heat registers
and stoves. Installation of the terminal near consumer electronics devices, such
as stereo receiver/ampliers and televisions, is permitted as long as the air
surrounding the terminal does not exceed 40º C (104º F).
• Place the terminal on a at surface not prone to vibration or impact.
• Do not place the terminal on top of another electronic device.
• Do not install the terminal in an area where condensation occurs.
• To prevent the temporary loss of guide data and cause a temporarily nonresponding terminal, do not plug the AC power cord into a switched power outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
• To avoid shock and vibration damage to the internal hard drive, do not move the
terminal while it is plugged in.
• To allow the hard drive to spin down and park its heads, wait at least 10 seconds
after disconnecting power before moving the terminal.
• Install the terminal so that there is a minimum of 3 inches of space between
surrounding surfaces and the back of the terminal to ensure proper ventilation.
FCC Certication
This product contains a radio transmitter and accordingly has been certied as
compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that
contain a radio transmitter are labeled with FCC ID and the FCC logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure
compliance requirements, the separation distance between the antenna and any
person’s body (including hands, wrists, feet and ankles) must be at least 20 cm (8
inches).
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and set-top.
• Connect the equipment into an outlet on a circuit dierent from that to which the
set-top is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modications not expressly approved by ARRIS for compliance
could void the user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY
ARRIS Enterprises, LLC., 3871 Lakeeld Drive, Suwanee, GA 30024, 1-866-36-ARRIS,
declares that this Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC
rules.
EU DECLARATION OF CONFORMITY
EU compliance is maintained at the following address: ARRIS Global Limited, Victoria
Road, Saltaire, West Yorkshire, BD18 3LF, United Kingdom.
INDUSTRY CANADA (IC)
This Class B digital device complies with Canadian ICES-003.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the IC RF exposure
compliance requirements, the separation distance between the antenna and any
person’s body (including hands, wrists, feet and ankles) must be at least 24 cm (9.5
inches).
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important installation, servicing, and
operating instructions in the documents accompanying the equipment.
This symbol indicates that dangerous voltage levels are present within
the equipment. These voltages are not insulated and may be of sucient
strength to cause serious bodily injury when touched. The symbol may
also appear on schematics.
CARING FOR THE ENVIRONMENT BY RECYCLING
When you see this symbol on an ARRIS product, do not dispose of the
product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or commercial
waste. Some countries or regions, such as the European Union, have set
up systems to collect and recycle electrical and electronic waste items.
Contact your local authorities for information about practices established
for your region. If collection systems are not available, call ARRIS
Customer Service for assistance.
WIRELESS LAN INFORMATION
This device is a wireless network product that uses Direct Sequence Spread Spectrum
(DSSS) and Orthogonal Frequency-Division Multiple Access (OFDMA) radio technologies.
The device is designed to be interoperable with any other wireless DSSS and OFDMA
products that comply with:
• The IEEE 802.11 Standard on Wireless LANs (Revision B, Revision G, Revision N,
and Revision AC), as dened and approved by the Institute of Electrical Electronics
Engineers
• The Wireless Fidelity (Wi-Fi) certication as dened by the Wireless Ethernet
Compatibility Alliance (WECA).
RESTRICTIONS ON THE USE OF WIRELESS DEVICES
In some situations or environments, the use of wireless devices may be restricted by
the proprietor of the building or responsible representatives of the organization. For
example, using wireless equipment in any environment where the risk of interference to
other devices or services is perceived or identied as harmful.
If you are uncertain of the applicable policy for the use of wireless equipment in a
specic organization or environment, you are encouraged to ask for authorization to
use the device prior to turning on the equipment.
The manufacturer is not responsible for any radio or television interference caused by
unauthorized modication of the devices included with this product, or the substitution
or attachment of connecting cables and equipment other than specied by the
manufacturer. Correction of the interference caused by such unauthorized modication,
substitution, or attachment is the responsibility of the user.
The manufacturer and its authorized resellers or distributors are not liable for any
damage or violation of government regulations that may arise from failing to comply
with these guidelines.
Note: The use of the 5150-5250 MHz frequency band is restricted to Indoor Use Only.
SECURITY WARNING: This device allows you to create a wireless network. Wireless
network connections may be accessible by unauthorized users. For more information
on how to protect your network, see the set-top User Guide for instructions or visit the
ARRIS website, www.arris.com.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION
ARRIS Enterprises, LLC., 3871 Lakeeld Drive, Suwanee, GA 30024
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY BEFORE
YOU USE ANY SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION (“SOFTWARE”)
PROVIDED WITH THE ARRIS DIGITAL CABLE RECEIVER OR HOME THEATER SYSTEM (EACH
SHALL BE REFERRED TO IN THIS LICENSE AS A “RECEIVER”). BY USING THE RECEIVER
AND/OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH
1
OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY
BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS LICENSE APPLY
TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT USE THE
SOFTWARE AND (II) RETURN THE RECEIVER AND THE SOFTWARE (COLLECTIVELY,
“PRODUCT”), INCLUDING ALL COMPONENTS, DOCUMENTATION AND ANY OTHER
MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR POINT OF PURCHASE OR SERVICE
PROVIDER, AS THE CASE MAY BE, FOR A FULL REFUND.
The Software includes associated media, any printed materials, and any “on line”
or electronic documentation. Software provided by third parties may be subject to
separate end user license agreements from the manufacturers of such Software. The
Software is never sold. ARRIS licenses the Software to the original customer and to any
subsequent licensee for personal use only on the terms of this License. ARRIS and its
third party licensors retain the ownership of the Software.
You may:
USE the Software only in connection with the operation of the Product.
TRANSFER the Software (including all component parts and printed materials)
permanently to another person, but only if the person agrees to accept all of the terms
of this License. If you transfer the Software, you must at the same time transfer the
Product and all copies of the Software (if applicable) to the same person or destroy any
copies not transferred.
TERMINATE this License by destroying the original and all copies of the Software (if
applicable) in whatever form.
You may not:
(1) Loan, distribute, rent, lease, give, sublicense or otherwise transfer the Software,
in whole or in part, to any other person, except as permitted under the TRANSFER
paragraph above. (2) Copy or translate the User Guide included with the Software, other
than for personal use. (3) Copy, alter, translate, decompile, disassemble or reverse
engineer the Software, including but not limited to, modifying the Software to make it
operate on non compatible hardware. (4) Remove, alter or cause not to be displayed,
any copyright notices or startup message contained in the Software programs or
documentation. (5) Export the Software or the Product components in violation of any
United States export laws.
The Product is not designed or intended for use in on line control of aircraft, air trac,
aircraft navigation or aircraft communications; or in design, construction, operation or
maintenance of any nuclear facility. ARRIS AND ITS THIRD PARTY LICENSORS DISCLAIM
ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT
AND WARRANT THAT YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES.
Title to this Software, including the ownership of all copyrights, mask work rights,
patents, trademarks and all other intellectual property rights subsisting in the foregoing,
and all adaptations to and modications of the foregoing shall at all times remain with
ARRIS and its third party licensors. ARRIS retains all rights not expressly licensed under
this License. The Software, including any images, graphics, photographs, animation,
video, audio, music and text incorporated therein is owned by ARRIS or its third
party licensors and is protected by United States copyright laws and international
treaty provisions. Except as otherwise expressly provided in this License, the copying,
reproduction, distribution or preparation of derivative works of the Software, any
portion of the Product or the documentation is strictly prohibited by such laws and
treaty provisions. Nothing in this License constitutes a waiver of the ARRIS rights under
United States copyright law.
This License and your rights regarding any matter it addresses are governed by the laws
of the State of Georgia, without reference to conict of laws principles. THIS LICENSE
SHALL TERMINATE AUTOMATICALLY if you fail to comply with the terms of this License.
ARRIS is not responsible for any third party software that is provided as a bundled
application, or otherwise, with the Software or that is downloaded to, or otherwise
installed on, the Product.
U.S. GOVERNMENT RESTRICTED RIGHTS
The Product and documentation is provided with RESTRICTED RIGHTS. The use,
duplication or disclosure by the Government is subject to restrictions as set forth in
subdivision (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at
52.227 7013. The contractor/manufacturer is ARRIS Enterprises, LLC., 3871 Lakeeld
Drive, Suwanee, GA 30024.
Open Source Software Information
For instructions on how to obtain a copy of any source code being made publicly
available by ARRIS related to software used in this ARRIS product you may send your
request in writing to:
ARRIS Enterprises, LLC.
Software Pedigree Operations
2450 Walsh Avenue
Santa Clara, CA 95051 USA
The ARRIS website opensource.arris.com also contains information regarding use
of open source. ARRIS has created the opensource.arris.com to serve as a portal for
interaction with the software community-at-large. This document contains additional
information regarding licenses, acknowledgments and required copyright notices for
open source packages used in this ARRIS product.
© 2016 ARRIS Enterprises, LLC. All rights reserved.
No part of this publication may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation, or adaptation) without
written permission from ARRIS Enterprises, LLC. (“ARRIS”). ARRIS reserves the right
to revise this publication and to make changes in content from time to time without
obligation on the part of ARRIS to provide notication of such revision or change.
ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, LLC. Other
trademarks and trade names may be used in this document to refer to either
the entities claiming the marks and the names of their products. ARRIS disclaims
proprietary interest in the marks and names of others. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by
Rovi, and is intended for home and other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or disassembly is prohibited.
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
• Lea estas instrucciones.
• Guarde estas instrucciones.
• Considere todas las advertencias.
• Siga todas las instrucciones.
• No use este aparato cerca del agua.
• Limpie sólo con un paño seco.
• No bloquee las aberturas de ventilación. Instale siguiendo las instrucciones del
fabricante.
• No instale cerca de fuentes de calor como radiadores, rejillas de aire caliente,
cocinas u otros aparatos que produzcan calor (incluidos amplicadores).
• No impida el propósito de seguridad del enchufe polarizado o con conexión a
tierra. Un enchufe polarizado tiene dos aspas, una más ancha que la otra. Un
enchufe de conexión a tierra tiene dos aspas y una tercera punta con conexión a
tierra. El aspa ancha o la tercera punta están diseñadas para su seguridad. Si el
enchufe incluido no se ajusta a la salida, pida al electricista el repuesto de la salida
obsoleta.
• Proteja el cable de alimentación para evitar pisarlo o que quede apretado,
especialmente en los enchufes y tomas de corriente, y revise el punto de salida del
aparato.
• Use exclusivamente conexiones/accesorios especicados por el fabricante.
• Desconecte el aparato durante tormentas eléctricas o cuando no se use durante
un tiempo prolongado.
• Todos los servicios de mantenimiento deben realizarlos personal calicado. El
servicio de mantenimiento se requiere cuando el aparato tiene algún daño, por
ejemplo cuando el cable de alimentación o enchufe está dañado, se ha derramado
líquido o el aparato ha sido golpeado por otros objetos, cuando se ha expuesto a
lluvia o humedad, no funciona normalmente o se ha caído.
CONSIDERACIONES DE SEGURIDAD IMPORTANTES PARA TODOS LOS SISTEMAS
• El enchufe del suministro eléctrico es el dispositivo de desconexión de la red.
Debe ser de fácil acceso y estar en funcionamiento.
• El aparato no debe exponerse a goteos o salpicaduras y no deben colocarse
objetos rellenos con líquidos, como oreros, sobre él.
• ADVERTENCIA: para reducir el riesgo de incendio o descarga eléctrica, no exponga
este aparato a la lluvia o la humedad.
• ADVERTENCIA: las baterías no deben exponerse a calor excesivo como luz solar,
fuego o algo similar.
• Consulte la etiqueta de la parte inferior de la unidad para marcas adicionales.
Durante el transporte a la casa del suscriptor
• Transporte el terminal de cables en su caja de envío o un contenedor acolchado.
• No exponga el terminal a la lluvia o a la humedad.
Durante la instalación
• No coloque el terminal en un área cerrada donde se bloqueen los ductos de
ventilación o se impida el ujo de aire a través de las aberturas de ventilación.
• Instale el terminal de modo que su posición no interera con su ventilación
adecuada. Por ejemplo, no coloque un terminal sobre una cama, sofá, alfombra o
supercie similar que podría bloquear las aberturas de ventilación.
• Instale el terminal de modo que quede un mínimo de dos pulgadas de espacio
entre las supercies circundantes y los costados superior, izquierdo y derecho del
terminal para garantizar una ventilación adecuada.
• Instale el terminal lejos de fuentes de calor como radiadores, rejillas de aire
caliente y cocinas. La instalación del terminal cerca de dispositivos electrónicos
del consumidor, como receptores/amplicadores estéreo y televisores, se permite
siempre y cuando el aire que rodea al terminal no sobrepase los 40º C (104º F).
• Coloque el terminal sobre una supercie plana no propensa a vibración ni
impacto.
• No coloque el terminal sobre otro dispositivo electrónico.
• No instale el terminal en un área donde ocurra condensación.
• Para evitar la pérdida temporal de datos guía y provocar que el terminal no
responda temporalmente, no enchufe el cable de alimentación de CA a un
tomacorriente.
CONSIDERACIONES DE SEGURIDAD ADICIONALES PARA MODELOS DVR
• Para evitar daños de golpes y vibraciones a la unidad de disco duro interna, no
mueva el terminal mientras está enchufada.
• Para que la unidad de disco duro deje de girar y detenga sus cabezales, espere al
menos 10 segundos después de desconectar la alimentación antes de mover el
terminal.
• Instale el terminal de modo que quede un mínimo de tres pulgadas de espacio
entre las supercies circundantes y la parte posterior del terminal para garantizar
una ventilación adecuada.
2
Loading...