ARRIS CPR Users Manual

ADDITIONAL INFORMATION

Service and Support

If you experience problems during the installation process that cannot be
resolved through the Setup Wizard or if you need assistance with the kit,
please contact our technical support.

Website: support.my4home.net

Phone: [phone]

Write down your username, password, and Connected Home Gateway MAC
address for your records. The Connected Home Gateway MAC address is
located on the bottom of the device as shown in the illustration below.

4home

CONNECTED HOME GATEWAY

Username

Password

MAC address

Motorola Mobility, Inc., www.motorola.com

MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC.
All other product or service names are the property of their respective owners. All materials contained in this document
including artwork, images, and text are protected by United States copyright law. The materials may not be published,
redistributed, or altered without explicit permission from their respective owners.
©2012 Motorola Mobility, Inc. All rights reserved.

587527-001-a 02/12

WELCOME TO MOTOROLA

CONNECTED HOME GATEWAY

QUICK INSTALL GUIDE

Step 1

HOME MONITORING

Set up additional cameras to check on your home and family
members while you are away.

HOME CONTROL

Take advantage of camera sensors, scenes, and schedules to control
your home locally and remotely.

VIDEO RECORDINGS

Control your personal recordings and share them with your family and
friends.

MESSAGING

Be notified upon events via email on your computer or SMS text mes-

sages on your mobile phone.

Step 3

In the Box

Your starter kit contains several devices that are designed to work
together. As you unpack the kit, please make sure that all components
are present.

1

Home Services

Gateway

4

2

Fixed IP Camera

5

Smart Appliance

Module

3

6

Enjoy Your Services

Congratulations! You have successfully set up your starter kit.

Here are just some of the exciting features of the Motorola Connected
Home Gateway Services:

Remote Controller

Door/Window SensorLamp Module

Step 2

Launch the Setup Wizard

The Setup Wizard is an application designed to guide you through the
process of setting up your Managed Home Services gateway and
included home control and monitoring devices.

1. Click on the URL in your Welcome email

2. Setup Wizard will open in a browser window

3. Follow the instructions in the Setup Wizard