Basic Rack Power
Distribution Unit
AP9559
Installation
This manual is available in English on the enclosed
CD.
Dieses Handbuch ist in Deutsch auf der beiliegenden
CD-ROM verfügbar.
Este manual está disponible en español en el CD-ROM
adjunto.
Ce manuel est disponible en français sur le CD-ROM
ci-inclus.
Questo manuale è disponibile in italiano nel CD-ROM
allegato.
Instrukcja Obslugi w języku polskim jest dostępna na
CD.
O manual em Português está disponível no CD-ROM
em anexo.
Bu kullanim kilavuzunun Türkçe'sä, äläxäkte gönderälen
CD äçeräsände mevcuttur.
Contents
Before you Begin . . . . . . . . . . . . . . . . . . . . . 1
Safety & grounding information . . . . . . . 1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . 2
Mounting options . . . . . . . . . . . . . . . . . . . 2
Attaching brackets to the PDU . . . . . . . . . 2
Mounting the PDU (using screws) . . . . . . . 3
Mounting the PDU (toolless mounting) . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Overview . . . . . . . . . . . . . . . . . . . . . . . . . 5
Specifications. . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty and Service . . . . . . . . . . . . . . . . . 7
Limited warranty . . . . . . . . . . . . . . . . . . . 7
Obtaining service . . . . . . . . . . . . . . . . . . . 7
Warranty limitations . . . . . . . . . . . . . . . . . 8
Life-Support Policy . . . . . . . . . . . . . . . . . . . . 9
General policy . . . . . . . . . . . . . . . . . . . . . 9
Examples of life-support devices . . . . . . . 9
Basic Rack Power Distribution Unit i
Before You Begin
Safety and grounding information
Read the following information before
installing or operating your
Electrical
Hazard
•This
Distribution Unit (
PDU is intended for indoor use only.
• Do not install this
moisture or heat is present.
• Never install any wiring, equipment, or
during a lightning storm.
• Plug this
PDU into a three-wire, grounded
power outlet only. The power outlet must be
connected to appropriate branch circuit/mains
protection (fuse or circuit breaker).
Connection to any other type of power outlet
may result in a shock hazard.
• Use only the supplied brackets for mounting.
• Do not use an additional extension cord or
adapter with the primary power cord.
• Do not work alone under hazardous
conditions.
• Check that the power cord, plug, and socket
are in good condition.
• To reduce the risk of electric shock when you
cannot verify grounding, disconnect the
from the power outlet before installing or
connecting equipment. Reconnect it to the
power outlet only after you have made all
connections.
• Pluggable equipment includes a protective
earth connector, which carries the leakage
current from the load devices (computer
equipment). Do not exceed a total leakage
current of 3.5 mA.
• Do not handle any kind of metallic connector
before the power has been removed.
• Use one hand, whenever possible, to connect
or disconnect signal cables to avoid a possible
shock from touching two surfaces with
different grounds.
• This unit does not have any user-serviceable
parts. Repairs are to be performed only by
factory-trained service personnel.
• Always install the equipment as shown in the
Installation Manual.
PDU).
PDU where excessive
APC Power
PDU
PDU
Basic Rack Power Distribution Unit 1
How to Install the Rack PDU
Mounting options
You can use choose three different options for
mounting your PDU in an enclosure, depending on
your preferences and the type of enclosure. All
options require that you first attach mounting
brackets to the PDU.
• Vertical mounting
For any standard 19-inch rack, you can
attach the brackets to the enclosure using
the screws provided.
For a NetShelter VX enclosure (AR2100
series), you can mount the brackets to the
enclosure by snapping them into place
(toolless mounting).
• Horizontal mounting: For any NetShelter
enclosure, you can mount the brackets to the
enclosure using the screws provided.
Horizontal mounting uses 1 U-space.
Attaching brackets to the PDU
1. Decide where and how you will mount the
PDU in the enclosure. (See the figures on the
following pages.)
2. Choose the appropriate mounting brackets, as shown below, for the option you chose:
• for 19-inch vertical mounting
• for horizontal mounting
• for toolless mounting
3. Attach the brackets to the unit using four
flat-head Phillips screws (provided) for each
bracket.
2 Basic Rack Power Distribution Unit
How to Install the Rack PDU
Mounting the PDU (using screws)
Vertical-mount (19-inch)
Horizontal-mount (1 U-space)
Basic Rack Power Distribution Unit 3
How to Install the Rack PDU
Mounting the PDU (toolless mounting)
This option for mounting the PDU is available for
NetShelter VX enclosures only.
1. Holding the PDU in the direction shown
below, slide the mounting pegs into the holes
provided in the channel in the rear panel of the
enclosure.
2. Snap the PDU into place by pushing it downward until it locks into position.
4 Basic Rack Power Distribution Unit
Operation
Overview
Input IEC-320-C20 input connector (16 A @
Outlets Two (2) IEC-320-C19 outlets
Outlets Ten (10) IEC-320-C13 outlets
240 V; 20A @ 120 V) used with
detached power cord (supplied)
.
Basic Rack Power Distribution Unit 5
Specifications
Item Specification
Power
Input voltage range: 120–240 V
Maximum current draw:
Physical
Dimensions (L × W × D):
Wei gh t:
Shipping weight:
Environmental
Elevation (above MSL):
Operating
Storage
Temperature:
Operating
Storage
Relative humidity:
Operating
Storage
Approvals/Standards
208 V @ 12.8 A (UL, CUL)
120 V @ 16 A (UL, CUL)
240 V @ 16 A (VDE)
17.60 × 1.75 × 2.25 in
(44.70 × 4.45 × 5.72 cm)
2.15 lb
(0.98 kg)
5.20 lb
(2.36 kg)
0 to 10,000 ft (0 to 3000 m)
0 to 50,000 ft (0 to 15 000m)
32 to 113° F (0 to 45° C)
–13 to 149 ° F (–25 to 65 ° C)
0 to 95%, non-condensing
0 to 95%, non-condensing
UL, CUL, VDE
6 Basic Rack Power Distribution Unit
Warranty and Service
Limited warranty
APC warrants the Basic Rack PDU to be free from
defects in materials and workmanship for a period
of two years from the date of purchase. Its
obligation under this warranty is limited to
repairing or replacing, at its own sole option, any
such defective products. This warranty does not
apply to equipment that has been damaged by
accident, negligence, or misapplication or has been
altered or modified in any way. This warranty
applies only to the original purchaser.
Obtaining service
To obtain support for problems with your Basic
Rack PDU:
0
1. Note the serial number (located on the rear of
the Rack PDU) and date of purchase.
2. Contact Customer Support at a phone number
on the back cover of this document. A
technician will try to help you solve the
problem by phone.
3. If you must return the product, the technician
will give you a return material authorization
(RMA) number. If the warranty expired, you
will be charged for repair or replacement.
4. Pack the unit carefully. The warranty does not
cover damage sustained in transit. Enclose a
letter with your name, address, RMA number
and daytime phone number; a copy of the sales
receipt; and a check as payment, if applicable.
5. Mark the RMA number clearly on the outside
of the shipping carton.
6. Ship by insured, prepaid carrier to the address
provided by the Customer Support technician.
Basic Rack Power Distribution Unit 7
Warranty and Service
Warranty limitations
Except as provided herein, APC makes no
warranties, express or implied, including
warranties of merchantability and fitness for a
particular purpose. Some jurisdictions do not
permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
Except as provided above, in no event will APC be
liable for direct, indirect, special, incidental, or
consequential damages arising out of the use of
this product, even if advised of the possibility of
such damage.
Specifically, APC is not liable for any costs, such
as lost profits or revenue, loss of equipment, loss
of use of equipment, loss of software, loss of data,
costs of substitutes, claims by third parties, or
otherwise. This warranty gives you specific legal
rights and you may also have other rights, which
vary according to jurisdiction.
8 Basic Rack Power Distribution Unit
Life-Support Policy
General policy
American Power Conversion (
APC) does not
recommend the use of any of its products in the
following situations:
• In life-support applications where failure or
malfunction of the
APC product can be
reasonably expected to cause failure of the
life-support device or to affect significantly its
safety or effectiveness.
•
In direct patient care.
APC will not knowingly sell its products for use in
such applications unless it receives in writing
assurances satisfactory to
APC that (a) the risks of
injury or damage have been minimized, (b) the
customer assumes all such risks, and (c) the
liability of American Power Conversion is
adequately protected under the circumstances.
a
a
Examples of life-support devices
The term life-support device includes but is not
limited to neonatal oxygen analyzers, nerve
stimulators (whether used for anesthesia, pain
relief, or other purposes), autotransfusion devices,
blood pumps, defibrillators, arrhythmia detectors
and alarms, pacemakers, hemodialysis systems,
peritoneal dialysis systems, neonatal ventilator
incubators, ventilators (for adults and infants),
anesthesia ventilators, infusion pumps, and any
other devices designated as “critical” by the
.
FDA
U.S.
Hospital-grade wiring devices and leakage current
protection may be ordered as options on many
APC UPS systems. APC does not claim that units
with this modifications are certified or listed as
hospital-grade by
APC or any other organization.
Therefore these units do not meet the requirements
for use in direct patient care.
Basic Rack Power Distribution Unit 9
APC Worldwide Customer
Support
Customer support for this or any other APC product is
available at no charge in any of the following ways:
• Visit the APC Web site to access documents in the
APC Knowledge Base and to submit customer
support requests.
– www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific
countries, each of which provides customer
support information.
– www.apc.com/support/
Global support searching APC Knowledge Base
and using e-support.
• Contact an APC Customer Support center by
telephone or e-mail.
– Regional centers:
Direct InfraStruXure
Customer Support Line
APC headquarters U.S.,
Canada
Latin America (1)(401) 789-5735
Europe, Middle East,
Africa
Japan (0) 35434-2021
Australia, New Zealand,
South Pacific area
(1)(877)537-0607
(toll free)
(1)(800)800-4272
(toll free)
(USA)
(353) (91) 702000
(Ireland)
(61) (2) 9955 9366
(Australia)
– Local, country-specific centers: go to
www.apc.com/support/contact for contact
information.
Contact the
from whom you purchased your
APC representative or other distributor
APC product for
information on how to obtain local customer support.
Entire contents © 2004 American Power Conversion. All
rights reserved. Reproduction in whole or in part without
permission is prohibited. APC, the APC logo,
InfraStruXure, and NetShelter are trademarks of American
Power Conversion Corporation and may be registered in
some jurisdictions. All other trademarks, product names,
and corporate names are the property of their respective
owners and are used for informational purposes only.
990-7213A-001 12/2004
*990-7213A-001*
Loading...