Angelantoni Industrie FRL 260V-GL-AL Service Manual

environmental chambers division

biomedical Division

UNI EN ISO 9001 (ISO 9001)

UNI EN ISO 14001 (ISO 14001)

Sistema Qualità Certificato

NATO AQAP110

SERVICE

06056 Massa Martana (PG)

ITALY

e-mail : [e-mail]
fax : ++39 (75) 8955.200
tel : ++39 (75) 8955.1

MANUAL

REACH IN REFRIGERATOR

FRL

FRL 260V-GL-AL

Rel.290705 MSFRL260VGLALGB Angelantoni industrie S.p.A pag. 1 di 10

IMPORTANT

Before using this handbook, carefully the instruction handbook for the customer.
This handbook has been written for service engineers who have had specific
training on the equipment.
The service engineer should have a basic knowledge of low voltage systems as well
as small refrigerating systems with a hermetically sealed compressor.

WARNING

The installation and maintenance procedures, including the replacement of the
supply cable, must be carried out by qualified personnel. Make sure that the
equipment is switched off from the mains supply before removing any protective
panel.
Any operation on equipment under voltage must be carried out only by specialised
personnel only if there is no alternative; in this case always take precautionary
measures and use control instruments equipped with insulated probes.

Rel.290705 MSFRL260VGLALGB Angelantoni industrie S.p.A pag. 2 di 10

1) LIST OF SPARE PARTS

In this chapter, a series of detailed drawings will be given to allow an easy
individuation of the spare parts to be ordered.

1.1) HOW TO ORDER SPARE PARTS

To make the order of spare parts easier, please use the order form given hereinafter.

Angelantoni Industrie spa

as - Biomedical division

località Cimacolle

Massa Martana 06056

Perugia (Italy)

tel. [phone]

fax [phone]

SPARE PARTS’ ORDER

Buyer
address:______________________________________________________________

______________________________________________________________________
______________________________________________________________________

Type of equipment: :_________________________________________________
Part Number: :_________________________________________________
Year of manufacture: :_________________________________________________

Please send to the above address the spare parts hereinafter:

Means of transport:

____________________________________________________

Table Ref. Code Description Q.ty
no. no.

ATTENTION:

In order to avoid any mistake, we strongly recommend that you reproduce the
form above (e.g. by making a copy of it) and fill every part of it (references to
tables, etc.) very carefully before sending it back to the manufacturer.

Rel.290705 MSFRL260VGLALGB Angelantoni industrie S.p.A pag. 3 di 10