American Standard 6065.111, 6066.111, 6065.521, 6065.121, 6066.121 Installation Manual

...

SELECTRONIC

DC POWERED PROXIMITY EXPOSED TOILET FLUSH VALVE

1.1, 1.28, 1.6, 1.6/1.1 & 1.28/1.1 GPF

Exposed Flushometer for 1-1/2" Top Spud Bowls

CLOG RESISTANT

• Self-cleaning piston valve prevents clogging and reduces maintenance.

ONE SENSOR FITS ALL

• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and

ﬂush valves.

• Range can be adjusted manually or with optional remote control.

• Sensor Features Low Battery Indicator.

MODEL NUMBERS

6065.111 6066.111 6065.521

6065.121 6066.121 6065.525

6065.161 6066.161 6065.561

6065.721 6066.721 6065.565

6065.761 6066.761

CAUTION: Use only American Standard supplied

transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.

Certied to comply with ASME A112.19.2

Installation Instructions

NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Selectronic® Products visit our website at: www.americanstandard-us.com or e-mail us at: CRTTEAM@americanstandard.com

For Parts, Service, Warranty or other Assistance, please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369) (In Toronto Area only: 1-905-306-1093))

M965646 REV. 1.4 (7/15)

Thank you for selecting American-Standard...the benchmark of ne quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin.

UNPACKING

Some Residual Water May Remain In The Valve During Shipping.

All American Standard Products Are Water Tested At Our Factory.

Remove the Flush Valve items from the carton. The illustration below shows all items after they have been removed from the carton. Some items may be packaged partially assembled to other items.

1. Installation Instructions

2. Flush Valve Body Assembly

3. Vacuum Breaker Tube

4. Spud Coupling Nut and Washers

6. Wall Escutcheon

7. Cover Tube

8. Sweat Adapter

9. Stop Valve

5. Spud Flange

CARE INSTRUCTIONS:

DO: CLEAN THE PRODUCT WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

DO NOT REMOVE PROTECTIVE FILM FROM SENSOR EYE UNTIL INSTALLATION IS COMPLETE.

SELECTRONIC

DC POWERED PROXIMITY EXPOSED TOILET FLUSH VALVE

1.1, 1.28, 1.6,

1.6 / 1.1, & 1.28/1.1 GPF

6065.111

6065.121

6065.161

6065.721

6065.761

MODEL NUMBERS

6066.111

6066.121

6066.161

6066.721

6066.761

6065.521

6065.525

6065.561

6065.565

Exposed Flushometer for 1-1/2" Top Spud Bowls

CLOG RESISTANT

• Self-cleaning piston valve prevents clogging and reduces maintenance.

Certified to comply with ASME A112.19.2

Installation Instructions

NOTE TO INSTALLER: Please give this manual to the customer after installation.NOTE TO INSTALLER: Please give this manual to the customer after installation.

To learn more about American Standard Selectronic® Products visit our website at: www.americanstandard-us.com

or e-mail us at: CRTTEAM@americanstandard.com

For Parts, Service, Warranty or other Assistance,

please call (844) CRT-TEAM / (844) 278-8326 (In Canada: 1-800-387-0369)

• Self-cleaning piston valve prevents clogging and reduces maintenance.

ONE SENSOR FITS ALL

• Only 1 sensor for entire Selectronic™ line of faucets, urinals, and ﬂush valves.

• Range can be adjusted manually or with optional remote control.

• Sensor Features Low Battery Indicator.

CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.

(In Toronto Area only: 1-905-306-1093)

M965646 REV. 1.4 (7/15)

Roughing-in Dimensions Fig. 1

Right or Left Hand Installation

See (Section 5) for converting Flush Valve to Left Hand Installation.

73 mm

MANUAL

OVERRIDE

BUTTON

120 mm (4-3/4")

(2-7/8")

305 mm MÁX.

(12" MÁX.)

SUPPLY (1" NPT.)

(NPT de 1")

FINISHED WALL

GENERAL DESCRIPTION:

SELECTRONIC® PROXIMITY TOILET FLUSH VALVE Exposed Flushometer for 1-1/2” Top Spud Fixtures

Exclusive, self cleaning piston-type ush valve with proximity operation and manual override. Operates on DC (battery) power. Recommended operating pressure 35 to 80 psi. Can install left or right-handed. Detection Zone can also be adjusted manually, or with optional remote control.

15˚

DETECTION ZONE

400mm-800mm

(15-3/4 TO 31-1/2)

-C-L-

292 mm (11-1/2")

*Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6

fixture. Consult Codes for details.

*-C-L-

152mm MIN.

(6") MIN.

108mm-134mm (4-1/4" TO 5-1/4")

FOR 1-1/2" TOP SPUD FIXTURES

" (152mm) above

412 mm

(16-3/16")

RECOMMENDED TOOLS; Fig. 2.

1. Teon Tape

2. Flat Blade Screwdriver

3. Adjustable Wrench

4. Tape Measure

5. Hacksaw

6. Tubing Cutter

7. File

8. For Sweat Connection; Solder and Torch

9. 2.5mm Hex Wrench

10. 1.5mm Hex Wrench

PRIOR TO INSTALLATION

Note: Prior to installing the Selectronic™Flush

Valve the following items must be installed.

1. Toilet

2. Drain line

3. Water supply line

IMPORTANT:

• All plumbing and electrical wiring should be installed in accordance with applicable codes and regulations.

• The use of water hammer arrestors is strongly recommended for commercial applications. All piping

behind the walls should be properly secured and fastened.

• Water supply lines must be sized to provide an

adequate volume of water for each xture.

170 mm MÁX. (6-11/16") MÁX.

CAUTION: Use only American Standard supplied transformers and cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.

Fig. 2

10'

7 9 10

• Flush all water lines prior to operation (See Step 4). Dirt and debris can cause ush valve to run continuously.

• With the exception of Stop Valve Inlet, DO NOT use pipe sealant or plumbing grease on any valve component or coupling!

• Protect the chrome or special nish on the Flushometer. DO NOT USE toothed tools on nished surfaces to install or service these valves. Also see “Care and Cleaning” section of this manual.

• This product contains mechanical and/or electrical components that are subject to normal wear. These components should be checked on a regular basis and replaced as needed to maintain the valve’s performance.

M965646 REV. 1.4 (7/15)

+ 7 hidden pages