Alto-Shaam Drawer Warmers 500-1DN, Drawer Warmers 500-3DN, Drawer Warmers 500-2DN User Manual

500-1DN
500-2DN
500-3DN

DRAWER WARMERS

DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

PRINTED IN U. S .A . #18A - 10/05

ITEM NO. _______________________

ANSI/NSF 4

ADDITIONAL FEATURES & OPTIONS

●

Built-in Trim kit

● Caster Stand Assembly

● Leg Stand Assembly

● Drawer Assembly with vents

■■ Specify on order

●

HALO HEAT . . . a controlled, uniform heat source that gently
surrounds foods for better appearance, taste, and longer holding life.

●

Product moisture is retained without adding water.

●

Holding temperature gauge monitors inside air temperature.

●

Dual wattage control on the one and two drawer 120V cabinets
for more precise control of hard-to-hold products.
— 500 watts for breads, rolls, biscuits
— 1000 watts for meat, potatoes, and vegetables

●

Extra large pans for additional capacity.

●

Canted thermostat knob and indicator light.

— Protects controls from damage
— User safety feature

●

ON/OFF adjustable thermostat.

●

Can be built into cabinets or counters. Built-in trim kits
are available.

●

Stackable design.

Exterior of 20 gauge non-magnetic stainless steel with 16 gauge stainless steel drawer rail supports per drawer.
Each cabinet is controlled by one (1) ON/OFF adjustable thermostat with a range of 60° to 200°F (16° to 93° C)
and includes one (1) holding temperature gauge to monitor inside air temperature. Each drawer includes one (1)
12" x 20" x 6" (305mm x 508mm x 152mm) stainless steel pan. Drawer warmers are designed with four (4) stacking
projections, located on the top of each cabinet, to allow stacking in any combination without the need of additional
hardware. Stacked combinations can be mounted on a 5" (127mm) Caster Stand Assembly for mobility, or a
6" (152mm) Leg Stand Assembly for stationary placement.

■■ MODEL 500-1DN: one drawer warmer, narrow design

■■ MODEL 500-2DN: two drawer warmer, narrow design

■■ MODEL 500-3DN: three drawer warmer, narrow design

ELECTRONIC CONTROL OPTION

■■ Solid state electronic control option simplifies temperature setting, has

a clear, easy-to-read LED display, and is adjustable in increments of 1 degree.

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.

PHONE: [phone].558.8744 U .S .A ./CANADA FAX: [phone].329.8744 U.S.A. ONLY

WEBSITE: www.alto-shaam.com

®

DUE TO ONGOING PRODUCT DEVELOPMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

PRINTED IN U. S .A .

DIMENSIONS: H x W x D

500-1DN EXTERIOR:

11-11/16" x 16-7/16" x 29-15/16" (296mm x 418mm x 761mm)

500-2DN EXTERIOR:

18-7/8" x 16-7/16" x 29-15/16" (479mm x 418mm x 761mm)

500-3DN EXTERIOR:

26-3/16" x 16-7/16" x 29-15/16" (663mm x 418mm x 761mm)

Pan size: (

EACH DRAWER)

12" x 20" x 6" (305mm x 508mm x 152mm) GN 1/1

PRODUCT CAPACITY

20 lbs (9 kg) MAXIMUM • EACH DRAWER

(34 BAKED POTATOES, 50 DINNER ROLLS)

CLEARANCE REQUIREMENT (FOR VENTILATION)

Minimum: 3-inches (76mm) at the back, 2-inches (51mm)

at the top, and 1-inch (25mm) at both sides. On-site

venting for proper airflow must also be provided for

built-in counter installations.

INSTALLATION REQUIREMENTS

Drawer warmer must be installed level, and must not be

installed in any area where it may be affected by steam,

grease, dripping water, high temperatures, or any other

severely adverse conditions.

WEIGHT

500-1DN 500-2DN 500-3DN

NET 67 lb (30 kg) 100 lb (45 kg) EST. 130 lb (59 kg) EST.

SHIP 75 lb (34 kg) 112 lb (51 kg) 145 lb (66 kg)

CRAT

E

15" X 21" X 33" 22" X 21" X 33" 29" X 21" X 33"

DIMENSIONS:

OPTIONS & ACCESSORIES

Built-in Trim Kit

■■ 500-1DN 44225

■■ 500-2DN 44227

■■ 500-3DN 44229

■■ Caster Stand Assembly 55534

■■ Drawer Assembly with vents 55537

■■ Leg Stand Assembly 55535

■■ Perforated pan grid, 12" x 20" (305mm x 508mm) 16642

ELECTRICAL

VOLTAGE PHASE CYCLE/HZ AMPS kW

120 1 60 LOW 4.0 0.5

HIGH 8.5 1.05

at 208 1 50/60 4.0 0.8

at 240 1 50/60 4.5 1.05

230 1 50/60 4.2 0.97

208-240

#18A -10/05

500-1DN

500-2DN

500-3DN

1-11/16" (42mm)

C

L

16-7/16" (418mm)

50-7/8" (1291mm)

28-1/8" (714mm)

11-11/16"

(296mm)

18-7/8" (479mm)

26-3/16" (663mm)

ELECTRICAL CONNECTION

ELECTRICAL CONNECTION

HI-LO Switch available only on 500-1DN and 500-2DN.

6-3/4" (171mm)

FOR LEG STAND OR CASTER STAND ASSEMBLY

29-15/16" (761mm)

HANDLE

500-1DN, 500-2DN, 500-3DN

DRAWER WARMERS

(H x W x D)

NEMA 5-15P

15A, 125V PLUG

NEMA

6-15P

15A, 250V PLUG

FOR USA ONLY

CEE

7/7,

220-230V PLUG

(381 x 533 x 838 mm) (559 x 533 x 838 mm) (737 x 533 x 838 mm)

DOMESTIC SHIPMENTS ONLY

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A.

PHONE: [phone].558.8744 U .S .A ./CANADA FAX: [phone].329.8744 U.S.A. ONLY

WEBSITE

: www.alto-shaam.com

®