Alpine KIT-7BM1M Installation Manual [EN]

Note:

Only for BMW without switch
panel under climate control unit:

Installation Manual
Double DIN Kit

APF-F381023-07-1BM

 •BMW1(E87)03/2007->(facelift)

Attach blanking cover to facia plate
(see arrow)

- with manual air condition

- without iDrive

3

4

1

1. Facia Plate

2. Mounting Bracket Right

3. Mounting Bracket Left

4. Blanking Cover*
* only required for models without

switch panel under climate control

5. Ribbon Cable

6

2

5

© 09/2010 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints

18

1. BMW 1 (E87) 03/2007 (facelift)
with switch bar under the climate
control unit

BMW without switch panel under
climate control unit (see left)

- skip steps 11 - 14

- see note on page 8

2. Unclip middle panel

and remove it carefully

a

(a) and switch bar (b) to
replacement facia plate

b

16. Attach mounting brackets to
double DIN navigation

15. Attach air condition control unit

3

Connect all required circuit points

6

Fix double DIN navigation
into dash board

2

3. Unclip air condition control unit

17. Push facia plate over Double DIN
navigation - until it snaps in

Reinstall everything in reverse
order to nish installation

4. Pull out air condition control

unit carefully

Remove pulgs (see arrows)

2

7