AT-LX3801 Blank Slot Cover Installation Guide
AT-LX3801 Blank Slot Cover Installation Guide
AT-LX3801 Blank Slot Cover Installation Guide
AT-LX3801 Blank Slot Cover Installation Guide
Overview
The AT-LX3801 blank slot cover protects the fiber optic
connectors on the backplane from becoming dirty, and helps
maintain proper air flow through the chassis.
AT-LX3801
176
Note
Allied Telesyn strongly recommends that a blank slot
cover be inserted in any slot that does not contain a
functioning AT-LX3811/x Multi-Service Line Card.
Related Documents
For details on the features and functions of your Allied
Telesyn AT-LX3800U Multi-Service Transport System, refer
to the following documents on our web site,
www.alliedtelesyn.com:
• AT-LX3800U Multi-Service Transport System
Installation and Maintenance Guide
(part number 613-50549-00)
• AT-S65 Management Software User ’s Guide
(part number 613-50604-00)
Verifying Package Contents
Make sure that the correct components are included in your
package:
• AT-LX3801 Blank Slot Cover
• Warranty Card
• This installation guide
If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
Installing an AT-LX3801 Blank Slot Cover
To install an AT-LX3801 Blank Slot Cover, perform the
following procedure:
1. Remove the AT-LX3811 Blank Slot Cover from its
shipping package and store the package in a safe
place. You must use the original package if you need to
PN 613-50557-00 Rev. A
Overview
The AT-LX3801 blank slot cover protects the fiber optic
connectors on the backplane from becoming dirty, and helps
maintain proper air flow through the chassis.
AT-LX3801
176
Note
Allied Telesyn strongly recommends that a blank slot
cover be inserted in any slot that does not contain a
functioning AT-LX3811/x Multi-Service Line Card.
Related Documents
For details on the features and functions of your Allied
Telesyn AT-LX3800U Multi-Service Transport System, refer
to the following documents on our web site,
www.alliedtelesyn.com:
• AT-LX3800U Multi-Service Transport System
Installation and Maintenance Guide
(part number 613-50549-00)
• AT-S65 Management Software User’s Guide
(part number 613-50604-00)
Verifying Package Contents
Make sure that the correct components are included in your
package:
• AT-LX3801 Blank Slot Cover
• Warranty card
• This installation guide
If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
Installing an AT-LX3801 Blank Slot Cover
To install an AT-LX3801 Blank Slot Cover, perform the
following procedure:
1. Remove the AT-LX3811 Blank Slot Cover from its
shipping package and store the package in a safe
place You must use the original package if you need to
PN 613-50557-00 Rev. A
Overview
The AT-LX3801 blank slot cover protects the fiber optic
connectors on the backplane from becoming dirty, and helps
maintain proper air flow through the chassis.
AT-LX3801
176
Note
Allied Telesyn strongly recommends that a blank slot
cover be inserted in any slot that does not contain a
functioning AT-LX3811/x Multi-Service Line Card.
Related Documents
For details on the features and functions of your Allied
Telesyn AT-LX3800U Multi-Service Transport System, refer
to the following documents on our web site,
www.alliedtelesyn.com:
• AT-LX3800U Multi-Service Transport System
Installation and Maintenance Guide
(part number 613-50549-00)
• AT-S65 Management Software User’s Guide
(part number 613-50604-00)
Verifying Package Contents
Make sure that the correct components are included in your
package:
• AT-LX3801 Blank Slot Cover
• Warranty card
• This installation guide
If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
Installing an AT-LX3801 Blank Slot Cover
To install an AT-LX3801 Blank Slot Cover, perform the
following procedure:
1. Remove the AT-LX3811 Blank Slot Cover from its
shipping package and store the package in a safe
place. You must use the original package if you need to
PN 613-50557-00 Rev. A
Overview
The AT-LX3801 blank slot cover protects the fiber optic
connectors on the backplane from becoming dirty, and helps
maintain proper air flow through the chassis.
AT-LX3801
176
Note
Allied Telesyn strongly recommends that a blank slot
cover be inserted in any slot that does not contain a
functioning AT-LX3811/x Multi-Service Line Card.
Related Documents
For details on the features and functions of your Allied
Telesyn AT-LX3800U Multi-Service Transport System, refer
to the following documents on our web site,
www.alliedtelesyn.com:
• AT-LX3800U Multi-Service Transport System
Installation and Maintenance Guide
(part number 613-50549-00)
• AT-S65 Management Software User’s Guide
(part number 613-50604-00)
Verifying Package Contents
Make sure that the correct components are included in your
package:
• AT-LX3801 Blank Slot Cover
• Warranty card
• This installation guide
If any item is missing or damaged, contact your Allied
Telesyn sales representative for assistance.
Installing an AT-LX3801 Blank Slot Cover
To install an AT-LX3801 Blank Slot Cover, perform the
following procedure:
1. Remove the AT-LX3811 Blank Slot Cover from its
shipping package and store the package in a safe
place. You must use the original package if you need to
PN 613-50557-00 Rev. A
return the unit to Allied Telesyn.
RDY
TX
RX
TRIB
SYNC
TX
RX
LINE
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
RD
T
R
TRIB
811/2
P
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
RD
T
R
TRIB
811/2
P
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
AT-LX3801
RDY
TX
RX
TRIB
SYNC
TX
RX
LINE
2
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
R
TRIB
X3811/2
SFP
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
R
TRIB
811/2
P
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
AT-LX3801
RDY
TX
RX
TRIB
SYNC
TX
RX
LINE
2
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
TRIB
3811/2
FP
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
2
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
RD
T
R
TRIB
3811/2
FP
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
AT-LX3801
RDY
TX
RX
TRIB
SYNC
TX
RX
LINE
2
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
RD
T
R
TRIB
3811/2
FP
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
2
3
4
5
6
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/3
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/4
TRIB
RD
T
R
TRIB
X3811/2
SFP
SYNC
TX
RX
LINE
SFP
SYNC
TX
RX
LINE
RDY
TX
RX
TRIB
AT-LX3811/6
AT-LX3801
2. Select the slot in the AT-LX3800U chassis where you
want to install the blank slot cover.
3. If an AT-LX3811/x Line Card is installed in the slot, do
the following:
a. Disconnect the cables from the SFP transceiver in
the line card.
b. Reinstall the SFP dust cap.
c. Remove the line card from the slot.
d. Put dust caps on the fiber optic connectors.
4. Locate the left and right alignment guides in the slot.
return the unit to Allied Telesyn.
2. Select the slot in the AT-LX3800U chassis where you
want to install the blank slot cover.
3. If an AT-LX3811/x Line Card is installed in the slot, do
the following:
a. Disconnect the cables from the SFP transceiver in
the line card.
b. Reinstall the SFP dust cap.
c. Remove the line card from the slot.
d. Put dust caps on the fiber optic connectors.
4. Locate the left and right alignment guides in the slot.
return the unit to Allied Telesyn.
2. Select the slot in the AT-LX3800U chassis where you
want to install the blank slot cover.
3. If an AT-LX3811/x Line Card is installed in the slot, do
the following:
a. Disconnect the cables from the SFP transceiver in
the line card.
b. Reinstall the SFP dust cap.
c. Remove the line card from the slot.
d. Put dust caps on the fiber optic connectors.
4. Locate the left and right alignment guides in the slot.
return the unit to Allied Telesyn.
2. Select the slot in the AT-LX3800U chassis where you
want to install the blank slot cover.
3. If an AT-LX3811/x Line Card is installed in the slot, do
the following:
a. Disconnect the cables from the SFP transceiver in
the line card.
b. Reinstall the SFP dust cap.
c. Remove the line card from the slot.
d. Put dust caps on the fiber optic connectors.
4. Locate the left and right alignment guides in the slot.
Alignment Guides
138
5. Align the back edge of the blank slot cover with the left
and right alignment guides.
6. Slide the blank slot cover into the slot until the
faceplate is flush with the front.
7. Use a Phillips head screwdriver to tighten the captive
screws.
8. Repeat this procedure to install additional AT-LX3801
Blank Slot Covers.
Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
Alignment Guides
5. Align the back edge of the blank slot cover with the left
and right alignment guides.
6. Slide the blank slot cover into the slot until the
faceplate is flush with the front.
142
7. Use a Phillips head screwdriver to tighten the captive
screws.
8. Repeat this procedure to install additional AT-LX3801
Blank Slot Covers.
Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
138
Alignment Guides
5. Align the back edge of the blank slot cover with the left
and right alignment guides.
6. Slide the blank slot cover into the slot until the
faceplate is flush with the front.
142
7. Use a Phillips head screwdriver to tighten the captive
screws.
8. Repeat this procedure to install additional AT-LX3801
Blank Slot covers.
Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
138
Alignment Guides
5. Align the back edge of the blank slot cover with the left
and right alignment guides.
6. Slide the blank slot cover into the slot until the
faceplate is flush with the front.
142
7. Use a Phillips head screwdriver to tighten the captive
screws.
8. Repeat this procedure to install additional AT-LX3801
Blank Slot covers.
Copyright © 2004 Allied Telesyn, Inc. All rights reserved. No part of
this publication may be reproduced without prior written permission
from Allied Telesyn, Inc. www.alliedtelesyn.com
138
142