Datasheet | intelligent Multiservice Gateways
AT-iMG646MOD
Modular, Ethernet intelligent Multiservice Gateway for Outdoor Deployment
T-iMG646MOD
A
The AT-iMG646MOD ia a modular gateway
product that consists of a base module with:
6 x 10/100TX LAN ports, 4 x VoIP FXS ports
and pluggable
1 x LAN module, 1 x WAN module
Modular, Ethernet intelligent
Multiservice Gateway for IP Triple
Play Services
A member of Allied Telesis’ family of residential
and intelligent Multiservice Gateways, the
outdoor hardened AT-iMG646MOD combines
powerful Layer 2 and 3 networking functionality
together with
support. to provide versatility, value, and
validation for any network.The environmentally
sealed enclosure mounts outside the customer
premise for optimal service provider
accessibility.
Voice-over-IP (VoIP) telephony
Applications
pitalizing on Existing Infrastructur
Ca
-iMG646MOD offers tremendous
T
A
The
versatility by offering both a modular Wide
Area Network (WAN) interface, as well as a
modular Local
Combined with the built-in Ethernet LAN and
Plain Old
MOD offers unlimited adaptability for field
deployments.The AT-EN646MOD enclosure
provides integrated fiber-optic drop cable
management,
secure and ground the drop cable, as well as
protect a fusion splice. Enclosures may be
yed at the time of fiber installation,
deplo
allowing a single fiber crew to complete all
-splicing needs during a single truck roll.
iber
f
Area Netw
elephon
T
where needed,
ork (LAN) interface.
y Service (POTS) ports, the
with the ability to
e
Softwar
e Real-time Applications
Optimization
Quality of Ser
The AT-iMG646MOD ensures Quality of
Service through OSI Layer 2 and 3
prioritization techniques that include priority
tagging with IEEE 802.1p and IP DiffServ Code
Points (DSCP) Type of Service (ToS).
vice
Optimization for IP Video Streaming
The AT-iMG646MOD ‘snoops’ IGMP multicast
packets in-transit allowing the simultaneous
ery of multiple movies or TV channels to
deliv
the subscriber using the minimum bandwith.
This results in high-quality video streaming
without impacting other services like Internet
browsing or IP telephony and delivering the fast
channel changes users expect from video
services. The iMG aids in the management and
diagnosis of the MPEG video service.The video
quality can be monitored using the unique
MPEG stream monitoring tool.
IP Telephony
The AT-iMG646MOD offers 4 FXS interfaces
that leverage the H.323, SIP and MGCP Voice
over IP (VoIP) protocols, with interoperability
established with major softswitch vendors.The
-iMG646MOD suppor
T
A
dial-up modems and fax machines with voice
PSTN interfaces and transports the data
streams to suppor
applications.
Data Deliv
er
ts the connection of
t existing SoHo b
y and Security
usiness
Differentiated Bandwidth Services
The AT-iMG646MOD provides extensive
support for per-por t rate-limiting enabling the
ser
vice providers to deliver tiered data services
or the wide spectr
ing f
cater
customer profiles.
um of end-
Key Features
• High-speed up to 100Mbps delivery
• IP Triple Play ready
• Stateful Inspection Firewall / NAT for customer
and service security
• Modular WAN and LAN modules reduces
deployment cost (CAPEX and OPEX savings)
• AlliedViewTMNMS integration removes need for
truck-roll during deployment
• Major softswitch manufacturer interoperability
established
• Service specific management and monitoring –
ensures Quality of Experience to customers
• Environmentally hardened unit for outdoor
deployments
• Installation flexibility through two part
enclosure and electronics design
• Internal fiber management for fiber-optic drop
cable termination
• Eight hour battery back-up option for lifeline
POTS support
Allied Telesis www.alliedtelesis.com
AT-iMG646MOD | Outdoor Ethernet intelligent Multiservice Gateway
Firewall Capability
The AT-iMG646MOD has an integral Stateful
Inspection Firewall with Network Addess
Translation (NAT), Denial of Service (DoS) and
an Intrusion Detection System (IDS) with
b
locking to protect end-customer networks.
Reducing Operational Cost
Value,Versatility, and Validation
T
he AT-iMG646MOD will support many
d
ifferent types of deployments senarios. Using
V
t
he Allied
configured during its initial power on sequence,
further reducing the need to ‘touch’ the device
during service provisioning and therefore
reducing the service provider’s operational
expenditure (Opex).
With a modular HPNA LAN interface, the iMG
can provide connectivity via existing customer
premises (inside) wiring, reducing the costly and
time consuming rewiring jobs.
A modular WAN interface, enables the service
provider to use the same system and configure
it for different access networks. Further
extending its value and reducing the service
provider’s opex, the AT-iMG646MOD offers
testing and fault-isolation on the Ethernet,
HPNA and POTS ports, that assist the service
technician to quickly pinpoint the solution when
troubleshooting a problem.
iewNMS, the iMG can be auto-
Management
Easy to Deploy and Manage
With the AT-iMG646MOD customer premises
deployment has never been easier.The
AT-EN646MOD Outside Plant Enclosure may
be pre-installed. It accommodates fiber
termination and grounding for the iMG. When
AT-iMG646MOD
vices are ordered,
ser
electronics chassis mounts easily into the
enclosure, and terminates in-home wiring and
er connection.
w
po
the
AlliedView NMS
The AT-iMG646-MOD is designed to be easy
to deploy and manage. With the Allied
NMS software platf
can be automatically provisioned and managed
remotely. The NMS provide secure
authentication and registr
automatic configuration of remote iMG units,
and seamless integr
service providers’ existing OSS platforms.
elesis
T
Allied
orm, the AT-iMG646MOD
ation with intelligent,
ation via XML/SO
View
AP with
Specifications
User’s Ports
6 x 10/100TX (RJ-45)
4 x VoIP FXS ports (RJ-11)
HPNA LAN (F-connector) requires HPNA end-point
WAN Ports
00BX single-fiber (BX, SC/UPC)
1
TX 1310 nm, RX 1550 nm
Range 15km
Power budget 17 dB
EPON (available 2H07)
G
Layer 2 Operation
Layer 2 wirespeed packet switching IGMP v1/v2 multicast
support
Tag-based IEEE 802.1Q VLANs (16 max.)
IEEE 802.1p prioritization
IEEE 802.1Q tag inser
tion and stripping programmable
rate limiting ingress/egress (32,000 steps)
Port mirroring ingress/egress traffic
gress QoS queue on each port
Input /e
Port speed selection 10, 100 or 10/100 1,000 MAC addresses
Layer 3 Operation
NAT
PPPoE
Stateful Inspection Firewall
Intrusion detection and blocking system
IPSec/VPN passthrough
Virtual server
Global IP address pool
Dynamic port opening
DHCP client, server and relay
DNS proxy
PAP/CHAP authentication
Static and dynamic IP address assignment
RIPv1/v2
VoIP Protocols
H.323 3.0
SIP 2.0
MGCP/NCS 1.0
oIP Ports
V
G.711 a-law and µ-law 64kbps G.723 (optional)
G.726 16/24/32/40kbps
G.729 8kbps
.168 LEC 8-32m/sec
G
T.38 fax relay
Automatic fax/modem detection
Voice Activity Detection (VAD)
t Noise Generation (CNG)
Comfor
Error mitigation/bad frame
Interpolation
Adaptive jitter buffer
REN: 5 per FXS port
TP voice packet encapsulation
R
Class 5 Ser
vices
Call transfer
Call waiting
Call hold
Message waiting
Caller ID
LED Status Indicators
er
w
o
P
System
POTS Use/ready/ringing
WAN Link/activity
LAN Link/activity
Network Management
AlliedView NMS
Local console port
Telnet
emote software upgrade
R
DHCP
Technical Specifications
Power Characteristics
External power supply
Input 12vDC, 1.5A
Power consumption 10W (typical) 18W (maximum)
Environmental Specifications
Operating temperature -40ºC to +60ºC
Storage temperature -40ºC to +80ºC
Operating humidity 5% to 95% RH
Physical Characteristics
AT-EN646MOD Enclosure
Dimensions
41.75cm x 29.25cm x 11.75cm
(H x W x D) 16.7” x 11.7” x 4.7”
Weight 3.6 lbs
AT-iMG646MOD
Dimensions 30cm x 21.75cm x 3cm
(H x W x D) 12” x 8.7” x 1.2”
Weight 2.65 lbs
Protocols and Standards
IPv4 RFC 791
TCP, UDP RFC 1144
IGMP (v1/v2) RFC 1112, 2236
PPPoE RFC 2516
PAP RFC 1334
CHAP RFC 1994
NAT RFC 1631
DHCP RFC 2131
VLAN IEEE 802.1p/Q, IEEE 802.1d,
IEEE 802.2, IEEE 802.3x
SNMP v1,v2,v3
RTP/RTCP
TFTP RFC 1350
Telnet RFC 318
ARP RFC 826
H.323
4.0
SIP 2.0 RFC 3261
MGCP/NCS
1.0
Codecs G.711, G.726, G.729
Approvals
CE Marking
Safte
y
EN60950-1 (TUV), EN60825-1,
UL 60950-1 (cULus),
CSA C22.2 No.
60950-1
Emission FCC Part 15 Class B
EN 55022 Class B
Immunity
Softs
witch Inter
EN 55024
operability
Cirpack, Net Centrex, Sonus Networks, Marconi, Siemens,
Audiocodes, Mediatrix, Arelnet, HotSIP, Iptel, Italtel,
Alcatel,
Lucent, Netmeeting, Nuera, OKI, Open H.323
Warranty
ears
o y
w
T
www.alliedtelesis.com
AT-iMG646MOD | Outdoor Ethernet intelligent Multiservice Gateway
Ordering Information
iMG646MOD
Model Description Part #
iMG646MOD-PKG1 Outdoor intelligent Multiservice Gateway with single-mode BiDi WAN, 6 x
1
0/100TX LAN, 4 x FXS. Requires enclosure AT-EN646MOD, power supply
AT-iMG006G and AT-iMG646MOD-C01 cable for battery back-up.
The enclosure may be ordered in advance of the electronics, for pre-installation.
EN646MOD Outdoor Enclosure for AT-iMG646MOD. AT-EN646MOD
iMG646MOD-PKG2 Outdoor Modular intelligent Multiservice Gateway with single-mode BiDi WAN,
6 x 10/100TX 4 x FXS plus HPNAv3 module. Requires the HPNA end-point to
terminate each coaxial cable end-point. Requires enclosure AT-EN646MOD,
power supply AT-iMG006G and AT-iMG646MOD-C01 cable for battery back-up.
iMG646MOD-PKG3 Outdoor Modular intelligent Multiservice Gateway with single-mode GEPON
WAN, 6 x 10/100TX 4 x FXS. Requires enclosure AT-EN646MOD, power supply
AT-iMG006G and AT-iMG646MOD-C01 cable for battery back-up.
AT-iMG646MOD-PKG1
AT-iMG646MOD-PKG2
AT-iMG646MOD-PKG3
iMG646MOD-L01-001 HPNA v3 LAN module
. For use with AT-iMG646MOD and AT-iMG626MOD.
A
T-iMG646MOD-L01-001
iMG646MOD-L02-001 iMG646MOD T1/E1 LAN module. Supports 2 x T1/E1 Circuit Emulation Service. AT-iMG646MOD-L02-001
Battery back-up: order with the following:
iMG006G DELTA PowerShield Grounded battery back-up (indoor) – for RG/iMG series
AT-iMG006G-xx*
(requires relevant battery back-up cable: AT-iMG646MMOD-C01).
iMG646MOD-C01 Battery back-up cable, for use with
AT-iMG646MOD. 15’ connectorized UV rated
AT-iMG646MOD-C01
cable for connection between DELTA PowerShield battery back-up unit and iMG.
Configuration Cable
Model Description Part #
MOD console cable Configuration cable. AT-iMG-MOD-CONSOLECABLE-00
Related iMAP Line Cards and Chassis
Model Description Part #
FX10BX 10 ports, 100Mbps BX single-mode single fiber AT-TN-109-A
FX20BX 20 por
ts, 100Mbps BS single-mode single fiber
T-TN-139-A
A
iMAP 9700 17-slot chassis with DC power AT-TN-250G-B
iMAP 9400 7-slot chassis with DC po
wer
MiniMAP 9101 3-slot mini chassis with DC po
MiniMAP 9102 3-slot mini chassis with
AC power
er
w
A
T-TN-251G
-TN-9101-A-80
T
A
T-TN-9102-A-xx*
A
er supply information
w
o
*P
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquar
Where xx = re
ters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
gion specific power cord / adapter *Where xx = 10 US power cord / adapter
30 UK power cord / adapter
50 European po
er cord / adapter (excluding UK)
w
www.alliedtelesis.com
© 2007 Allied Telesis Inc.All r ights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the proper ty of their respective owners. 617-000246 Rev. B
Loading...