Alcatel-Lucent OMNIACCESS SAFEGUARD CONTROLLER User Manual

Quick Start Guide | OmniAccess SafeGuard Family

Core Switch

IDS/IPS

Firewall

Internet

`

`

`

Access Switch

A/D Server

RADIUS

1. Thank you for your purchase of Alcatel-Lucent Products and Services.

Alcatel-Lucent Customer Support Information

Main Site

Sales & Support Contact Center Telephone

P/ N : 0 05-0 023

*005-0023 *

Rev. A1

*A1*

http://www.alcatel-lucent.com/wps/portal/enterprise

Support Site

http://www1.alcatel-lucent.com/enterprise/en/support/index.html

Email

[e-mail]

2. Mounting Options

North America 1-800-995-2696

Latin America 1-877-919-9526

Europe [phone]

Asia Pacific [phone]

Worldwide 1-818-878-4507

5. Connect a Terminal/PC or Notebook PC to the Serial
Com Port

Front

Status LEDs

Reset

Network Core

Host/Access

Port Pair

Extensibility Ports used for High

Availability and Monitoring

2a. Included are rubber feet if the box will be placed on a shelf or table.

2b. Included are mounting ears with their hardware. Please note: rack mount
screws are not included.

6. Login

Username:admin

Password: <enter>

7. Enter Device Configuration Mode

(SafeGuardOS) >enable

(SafeGuardOS) #configure terminal

8. Set Up Out-of-Band Management Port IP Addressing

(SafeGuardOS) (Config)#serviceport ip <ipaddr> <netmask> <gateway>

9. Set Device Time and Date

Set the correct time zone, one per line. The example below displays a sample
session.

(SafeGuardOS) (Config)#clock timezone PST -8

(SafeGuardOS) (Config)#exit

10. Configure the Network Time Protocol

Back

Ethernet Port

Management

COM PORT SETTING

Emulation Type (PC or Laptop) vt100
Bits Per Second 9600
Data Bits 8
Parity Bits None
Stop Bits 1
Flow Control None

The terminal or PC displays the login prompt.

Flash

Power

0000FCS000

Serial Number

3. SFP Installation

SFPs are Inserted into OmniAccess SafeGuard Family box

4. Power Options

To set the on-board real-time clock, first enter the ‘clock’ command to set the
time and date. The example below displays a sample session.

(SafeGuardOS) #clock set 10:05:00 Nov 1 2005

(SafeGuardOS) #configure terminal

(SafeGuardOS) (Config)#sntp client mode unicast

(SafeGuardOS) (Config)#sntp server <sntp-server-ipaddr>

11. Set Up Simple Network Management Protocol (SNMP)

Enter the OmniAccess SafeGuard system name. The example below displays
a sample session.

(SafeGuardOS) (Config)#snmp-server sysinfo name <name>

This command sets the physical location of the OmniAccess SafeGuard. The
range for name, location and contact is 1 to 31 alphanumeric characters. The
OmniAccess SafeGuard management application uses a format of
“region_building” for device location addressing. The example below
displays a sample session.

(SafeGuardOS) (Config)#snmp-server sysinfo location <location>

The SNMP read-only community string allows access to the OmniAccess
SafeGuard statistics. The SNMP Read-only community string enables a
remote device to retrieve information from a device. To restrict the access to
the OmniAccess SafeGuard device information, enter the name for the
SNMP read-only community. The example below displays a sample session.

(SafeGuardOS) (Config)#snmp-server community public

The SNMP read-write community string allows a remote device to read
information from a device and to modify settings on that device. Enter the
name for the SNMP read-write community. The example below displays a
sample session.

(SafeGuardOS) (Config)#snmp-server community private

(SafeGuardOS) (Config)#snmp-server community rw private

We supply country-specific power cords.

12. Set Up an Admin User Password

Enter the OmniAccess SafeGuard password.

(SafeGuardOS) (Config)#aaa mgmt-user passwd admin <password>

(SafeGuardOS) (Config)#exit

13. Save Configuration

(SafeGuardOS) #write memory

Are you sure you want to save? (y/n) y