Airlive WN-200USB User Manual

Declaration of Conformity

We, Manufacturer/Importer

OvisLink Corp.
5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan

Declare that the product

Wireless 11n USB Dongle
AirLive WN-200USB
is in conformity with

In accordance with 1999/5 EC-R & TTE Directive

WN-200USB

Wireless 11n USB Dongle

Quick Setup Guide

Clause

■

EN 300 328 v1.7.1 (2006-10)

■

EN 301 489-1 V1.6.1 (2005-09) /
EN 301 489-17 V1.2.1 (2002-08)

■

EN 50371

■

AS/NZS CISPR22: 2006 Class B

■

EN 60950-1:2001+A11: 2004

■

CE marking

Description

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission equipment operating in the 2.4GHz ISM band and using spread
spectrum modulation techniques; Part 1：technical characteristics and test
conditions Part2：Harmonized EN covering essential requirements under
article 3.2 of the R&TTE Directive.

Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic compatibility(EMC) standard for radio equipment and
Services; Part 17：Specific conditions for wideband data and HIPERLAN
equipment.

Generic standard to demonstrate the compliance of low power Electronic and
electrical apparatus with the basic restrictions related to human exposure to
electromagnetic field (10MHz – 300GHz) –General public.

Electromagnetic compatibility-requirements for radio disturbance characteristics
of information technology equipment.

Safety for information technology equipment including electrical business equipment.

Manufacturer/Importer

Signature：

Name：Albert Yeh

Position/ Title : Vice President Date：

2009/07/01

Regulatory Approvals

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interferences when the equipment is
operating in a commercial area. This equipment generates, uses and may radiate radio
frequency energy, and if not installed in accordance with the user guide, may cause
interference in the transmission of radio communications. If operating in a residential
area, it is probable this equipment will cause harmful interference, in which case the
user will be required to try to correct this interference using his own means.

Directive 1999 / 5 / EC

CE Statement

■

EN 300 328 v1.7.1 (2006-10)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
equipment operating in the 2.4GHz ISM band and using spread spectrum modulation techniques;
Part 1：technical characteristics and test conditions Part2：Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive.

■

EN 301 489-1 V1.6.1 (2005-09) / EN 301 489-17 V1.2.1 (2002-08)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic
compatibility(EMC) standard for radio equipment and Services; Part 17：Specific conditions for
wideband data and HIPERLAN equipment.

■

EN 50371

Generic standard to demonstrate the compliance of low power Electronic and electrical apparatus
with the basic restrictions related to human exposure to electromagnetic field (10MHz – 300GHz)
–General public.

■

AS/NZS CISPR22: 2006 Class B

Electromagnetic compatibility-requirements for radio disturbance characteristics of information
technology equipment.

■

EN 60950-1:2001+A11: 2004

Safety for information technology equipment including electrical business equipment.

CE Marking Warning

This is a Class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

This equipment may be used in AT, BE, CY, CZ, DK, EE, FI, FR, DE, GR, HU, IE, IT,
LV, LT, LU, MT, NL,PL,PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR

OvisLink Corporation declares that this device is in
compliance with the essential requirements and
other relevant provisions of directiv

e 1999/5/EC.

Tested To Comply
With FCC Standards.
FOR HOME OR OFFICE USE

P1

WN-200USB

Wireless 11n USB Dongle

Quick Setup Guide

English

Before inserting the WN-200USB into USB port, you have to install the
driver/utility first.

Install the driver/utility (included in the CD) to allow the WN-200USB to
work with your operating system.

For more detailed information, please refer to user’s manual.

Deutsc

Bevor Sie den WN-200USB mit dem USB Anschluss verbinden, müssen
Sie erst die Treiber/Tools installieren.

Installieren Sie die Treiber/Tools (auf der CD enthalten), damit der
WN-200USB mit Ihrem Betriebssystem funktioniert.

Für weitere Informationen sehen Sie bitte im Benutzerhandbuch nach.

Πριν τοποθετήσετε το WN-200USB βεβαιωθείτε πως έχετε εγκαταστήσει
το πρόγραμμα οδήγησης

εγκαταστήστε το πρόγραμμα οδήγησης (περιέχετε στο CD) για να
επιτρέψετε στο WN-200USB να επικοινωνήσει με το λειτουργικό σας
σύστημα.

Για περισσότερες λεπτομέρειες δείτε το εγχειρίδιο χρήσης.

h

Polski

Przed włożeniem WN-200USB do portu USB, proszę najpierw
zainstalować dołączone oprogramowanie wraz ze sterownikami.

Instalacja sterowników i oprogramowania ( na dostarczonej płycie CD)
jest konieczna do prawidłowego dostosowania Twojego system
operacyjnego do obsługi WN-200USB.

W celu uzyskanie dodatkowych informacji proszę skorzystać z
załączonej instrukcji obsługi.

Česky

Před připojením WN-200USB do USB portu, musíte nainstalovat
ovladače.

Nainstalujte ovladače (z přiloženého CD) a umožněte systému
komunikovat s WN-200USB.

Pro více detailních informací si přečtěte návod na přiloženém CD.

Español

Antes de insertar el WN200USB en el Puerto USB, primero instale el
driver/utilidad.

Instale el driver/utilidad(incluido en el CD) para que su WN200USB
funcione bajo su sistema operativo.

Para mayor información, favor de leer el manual de usuario.

MagyarΕλληνικός

A WN-200USB csatlakoztatása előtt telepítenie kell a drájvert és a
mellékelt szoftvert.

Telepítse a drájvert és a mellékelt szoftvert (a telepítő CD-ről), hogy a
WN-200USB-t használni tudja operációs rendszere alatt.

További információkat a használati útmutatóban talál.

Português

Antes de inserir o WN-200USB na porta USB, tem que instalar
primeiro o driver/utilitário.

Instale o driver/utilitário (incluído no CD) para permitir que o
WN-200USB trabalhe com o seu sistema operativo.

Para informações mais detalhadas, consulte por favor o manual de
utilizador.

Русский

Пожалуйста, установите драйвер устройства до
подключения устройства к USB порту.

Установка драйвера/утилиты (прилагается на компакт
диске) позволит WN-200USB работать с Вашей
операционной системой.

Для более детальной информации, пожалуйста,
обратитесь к руководству пользователя.

USB Connector

LED

Protection Gap

WN-300R

Ethernet

Internet

Slovensky

Pred vložením WN-200USB do portu USB musíte najprv nainštalovať
ovládač / aplikačný nástroj.

Pre dobrú spoluprácu WN-200USB s vašim operačným systémom,
nainštalujte ovládač / aplikačný nástroj (priložený na CD).

Detailnejšie informácie sa nachádzajú v používateľskej príručke.

Wireless

WN-200USB

150Mbps

NoteBook

P2