Airlive WLA-9000AP PCBA DATASHEET

WLA-9000AP-PCBA

108Mbps 802.11a/b/g Dual Radio AP PCBA*

he WLA-9000AP PCBA is a dream device for

T

WISP to build their wireless networks. The
AP features 2 Atheros 11a/b/g radios that run
in 5Ghz or 2.4GHz frequency band. Moreover,
it provides hi-power at 11a mode for extra long
distance application. There is an intergraded

802.3af POE port to let you run the AP at up to
100 meter distance away from the power source.

Dual

Radio

5GHz

2.4GHz

Atheros

108Mbps

POE
Port

Dual Wireless + Hi Power + 3 LAN Ports

The WLA-9000AP PCBA is equipped with 2 high-powered Atheros radios. The radio 1 runs in the
11a 5GHz mode only while the radio 2 runs at the 11a/b/g dual band mode. AirLive adds high power
amplifier to run the AP at 23dBm in 11a mode(200mW), that’s 4 times the output power of normal
11a radio(50mW). In addition, 3 programmable LAN ports are available for multi-mode AP/Gateway
configuration.

Multiple Operation Modes

The WLA-9000AP PCBA can operate in multiple wireless modes for different application
environments. Here are some examples:

Dual WDS Bridge Mode

In this mode, the AP can act as a signal repeating station in a wireless backbone network. In
addition, it can also function as directing station for NLOS application.

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

Dual AP Mode

In this mode, each of AP’s radio will work as broadcast station. Having 2 radios means the
coverage can be much stronger and further than 1 radio device.

AP + WDS Mode

In this mode, the AP can act as a signal repeating station in a wireless backbone network. In
addition, it can also function as directing station for NLOS application.

Ap + Client Mode

In this mode, one station works as an intermediate station. This enable the AP to link with remote
stations using client mode, then distribute the signal to other clients using AP mode.

AirLive also plan to have more wireless modes available in the near future.

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan