Airlive WL-5470POE User Manual

WL-5470POE

Hi-Powered POE Access Point with
eight Operation Modes

s the leading global WISP solution provider,
AirLive understands the application

A

environments of WISP operators. As a result, we
are constantly upgrading our AP’s firmware to meet
the changing demand of WISP operators. The
firmware adds high end features not commonly
found in the AP of this class. AirLive multi-function
Access Points not only work for long distance
application, but also work much better than the
competition.

8 Wireless Operation Modes

The AirLive WL-5470POE can operate in eight
different wireless modes. It can work as a
Wireless Router, AP, Client, Repeater, Bridge,
and much more. Whether it is for home, office,
or WISP; the AirLive AP has a solution for you.

Up to 400mW of Output Power*

AirLive’s high quality hardware let the AP
expand its RF output power up to 26dBm using
South American firmware. That’s four times
the output power of regular AP! It means much
greater distance and coverage.

* For South America only. Not available for other regions.

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

Traffi c Control QoS Function

AP Mode Tr affic Control

Traffic Control is a great tool to control

Access Point with Traffic Control

the bandwidth of the WISP subscribers.
Therefore, the WISP operators can offer
different class of connection speeds for
different subscription fees - just like the

1024K

512K

ADSL service! The AirLive advanced
Traffic Control firmware can control the
bandwidth by user interface or IP/MAC.

MAC Address
00:04:6F:11:11:11

Dynamic Signal Survey Function for Antenna Alignment

Having trouble align your antenna correctly to
the other outdoor AP? The AirLive Wireless
Signal Survey function tells you the receiving
signal strength dynamically as your antenna
turns. It automatically refreshes itself in the
process, therefore, making antenna alignment
much simpler than before.

Antenna Alignment Survey

Outdoor AP

Signal 70

64K

512K

Subscriber BSubscriber B

MAC Address
00:04:6A:88:88:88

Wireless Site Survey Connection Wizard

During a new WISP service installation, the
installer will need to find out which outdoor
AP provides the best signal in the area for
connection. The AirLive wireless site survey
function provides one step setup for this process.
First, the site survey page shows which AP has
the strongest signal. Then the installer performs
antenna alignment by using the signal survey
function. At last, the installer simply clicks on
“connect” button to establish connection. The
site survey is available even in AP mode, so
the installer can check the channels used by
surrounding APs to avoid interferences.

Signal 20

WL-5470POE

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan