Airlive WL-5460AP V2 DATASHEET

WL-5460AP v2

802.11g Multi-function Wireless Access Point

he AirLive WL-5460AP is the successor to the
OvisLink's popular WL-1120AP Wireless Access

T

Point with outstanding features at an very competitive
price. Fully compliant with the 802.11g and 802.11b
standard, it is compatible with most wireless devices
today. It features 2 LAN ports for connection to router
and LAN. The extra large 2MB Flash and 16MB
SDRAM ensures sophisticated applications can be
developed for it.

7 Mode Wireless

The WL-5460APv2 features an incredible 7-mode firmware.

AP Mode: The WL-5460AP is the central hub for all your wireless devices.
Bridge Mode: To connect 2 LANs together wirelessly.
Client Mode: Turn the WL-5460AP into a wireless card so you can connect with remote AP.
WDS Repeater: To increase the wireless coverage of a WDS enabled AP/Router
Universal Repeater: AirLive's unique universal repeater function let the WL-5460AP extend the

coverage of your AP/Router, even if your AP/Router doesn't have WDS function!
WISP Mode: The WISP mode is similar to Client Mode. IP sharing function is added so you can
share the WISP connection with many PCs.
WISP+Universal Repeater: The WISP+Universal Repeater mode let you share WISP connection on
both wireless and wired side.

Wireless Client Isolation

The WL-5460APv2 features the new Wireless Client Isolation function previous available only in
more expensive APs. When you enable this function, the wireless clients will not be able to see each
other. Therefore, it is an important function for office and Hotspot operator to protect the security
between different wireless users.

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan

ACK Timeout and TX Power
Regulation

The WL-5460APv2 features ACK timeout function to let you adjust the timeout value for long
distance operation. In addition, 5-level TX power adjustment let you match different antennas for law
compliance. The ability to set lower TX output power is also crucial if you want to match the AP with
external power amplifier.

Extended Security Features

The WL-5460APv2 support WEP, WPA and WPA2 security functions. In addition, WPA enterprise
for 802.1x authenticator are featured for AP and WDS mode. The combination of Encryption, Hide
SSID and Access Control ensures your wireless network is completely secured from intruder.

Whether it's for office or home environment, the AirLive 802.11g family bring you the maximum
performance and security for today's high speed wireless network.

* Before configuring TX power regulation, please clean the cookies on your PC first.

FEATURES & SPECIFICATIONS

Features

- AP, Bridge, Client, Repeater functions

- WISP Client Router mode

- WISP + Universal Repeater Mode

- Detachable Antenna, 2 LAN ports

- 802.1x, WPA, WPA2 and Web Mgt.

- TX power regulation in 4 levels

- Watchdog function use PING

- Wireless Client Isolation (e8 firmware)

- ACK Timeout Adjustment

- DHCP Relay function

- 802.11g Protection

Specifi cations

Hardware:

- 2x 10/100Mbps LAN Port

- 2MB Flash, 16MB SDRAM

- Reversed SMA Antenna Port

- Power, LAN, WLAN LED indicators

Antenna :

- 2 dBi detachable Dipole Antenna

- Reversed SMA Connector

Frequency Range:

- USA (FCC) 11 Channels: 2.412GHz~2.462GHz

- Europe (ETSI) 13 Channels : 2.412GHz~2.472GHz

Modulation Technique:

- 11g Orthogonal Frequency Division Multiplexing
(64QAM, 16QAM, QPSK, BPSK)

- 11b Direct Sequence Spread Spectrum (CCK,
DQPSK, DBPSK)

- Data Rate: 54, 48, 36, 24, 18,11, 5.5, 2, 1 Mbps

Output Power:

- 18dBm

- Adjustable in 4 levels

WISP Mode

- DHCP, PPTP, L2TP, PPPoE ISP Authentication
Support

- Wireless Client function as WAN

- WISP mode is not the same router mode

- To configure the WISP mode, you PC must be
connected to the LAN port

Security:

- 64/128-bit

- 802.1x Radius Support

- WPA/WPA2-PSK support

- WPA Enterprise support in AP/WDS mode

5F, No.96, Min-ChuanRd, Hsin-tien City, Taipei, Taiwan