How it Works
AGFA
Loading...
DIS198.00E
Adjustment Instructions
10 pgs983.53 Kb0
User manual
6 pgs103.32 Kb0

AGFA DIS198.00E User manual

Download
Page 1
Repair and Service
HOME
DD+DIS198.00E
Tools and Auxiliary Equipment
Section 6.2
List of Contents
1 Service Software for the ID Station SW Version PRID 1.1.05/1.1.07.....................................1
2 Processing Station - Overview of the Main tenance Menu for VIPS......................................3
18.07.2000 ADC System Components Section 6.2 / I
Page 2
Repair and Service
HOME
DD+DIS198.00E
Tools and Auxiliary Equipment

1 Service Software for the ID Station SW Version PRID 1.1.05/1.1.07

The ID - Station SW is a submenu of the “Preview Monitor Screen”. The service software is integrated in the system software of the ID - Station. For the explanation of the system software, please refer to the user manual.
start the PRID Software
•
File
Read cassette Patient list
Show history
Erase cassette Exit
select
•
Hold status
Operator
Operator
Configuration Mode
Operator
System Manager Service
Change user
ADC2IDENTIFICATION STATION
(only active during cassette identification)
Explanation
If active, images are only displayed on Preview Monitor and VIPS and are halted till the button “proceed” in the Preview
screen will be clicked. Automatic text selection Always to front
Overwrite Mode
Brings the ID window in front of the Preview Monitor window for
cassette identification Sound
Switch on/off confirmation beep after successful writing data to
the cassette Destination rerouting Reset window size
see user manual for further explanation.
To get access to the “System manager” and “Service” level
select
•
select
•
enter
•
select
•
select
•
Configuration Change user
and
Username
Configuration System Manager
Only active if Auto-Routing license is activated
Position and resize ID-window to default
Pass Word
again
.
Perform
(only active during cassette identification)
Help
Info (not
available) Version (displays ID station name and PRID – soft­ware version
18.07.2000 ADC System Components Section 6.2 / 1
Page 3
Repair and Service
HOME
Tools and Auxiliary Equipment
System Manager
Explanation
DD+DIS198.00E
Cassette detection Read only fields
CPF host feature Time host feature (not available) RIS settings Set timezone Screensaver / License Change passwords Set name of department Change language GUI – tool
* only in PRID 1.1.07
see user manual for further explanation.
select
•
*
*
<Service>
Service Explanation
Cassette is automatically detected after insertion in ID-tablet Make fields coming from RIS “Read Only”
- not implemented -
- not implemented ­Configure RIS; only active with RIS license Set your timezone
- not implemented – switch on licenses Change password for Operator and System Manager Enter department name where ID-Station is located Change language Configure Identification Screen Layout
*
*
1. RIS-link option has to be clicked on if the respective SW-license is purchased and activated (even on the Processing Station)
2. Auto-routing option has to be clicked on if the respective SW-license is purchased and activated (even on the Processing Station)
3. Full leg/spine option has to be clicked on if the respective SW-license is purchased and activated (even on the Processing Station)
4. Study option click on to activate ; this option is free of license. Option 1-4 only in PRID 1.1.05
5. Logfiles
view logfiles
-
delete logfiles
-
6. Initialization Cassette initialization (format, number, scan size ...)
7. Load CPF-file Load and parse cpf-file
8. Install languages Installation of language files
9. Reset passwords Reset all passwords to default values
10. Site Info View and edit site info
11. Reset Counters Reset statistic counters Option 10-11 only in PRID 1.1.07
Section 6.2 / 2 ADC System Components 18.07.2000
Page 4
DD+DIS198.00E
HOME

2 Processing Station - Overview of the Maintenance Menu for VIPS

Call up
↓↓↓↓ ↓↓↓↓ ↓↓↓↓
: !
!
Level 1
1Connect
2 Install
Controller Menu; Maintenance Password
******
“Open” terminal; type “mm” (no password required)
Remarks
Connect via Telnet to a network node
Tools to setup (V)DIPS
Level 2
1 Cpf-file
2 Software
3 Hardware
4 Monitor
5 Licenses
6Time Settings
Tools to install/copy configuration file "adc.cpf"
Software installation tools
Hardware installation tools
Testimages to adjust the monitor
License manager to switch on licensed software
Tools to change time zone, reboot time and U.I. reset time
or
Remarks
Level 3
1 View 2 From floppy 3 From host 4 From local disk 5 To floppy 6 Floppy Dir 7 Floppy Eject 8 Upload
9 Download 1 History 2 Patches
3 Upgrade 4 Fresh 5 PRID
1 Harddisk
2 PowerChute
3 Modem
1 SMPTE 2 Delta 3 Black Field 4 White Field 5 Geometry
6 adapted-Delta 7 adapted-SMPTE
1 Activate 2 Deactivate 3 Show 0 Exit
1 Time
2 TimeZone 3 Get time
Remarks
View the cpf-file Copy cpf-file from floppy and install it Copy cpf-file from cpf-host and install it Copy cpf-file from file on local disk and install it Copy cpf-file to floppy Directory list of the floppy Eject the floppy Copy cpf-file from the serial line (Zmodem) and install it Copy cpf-file to the serial line (Zmodem)
Display patch / installation history Install patches
Perform an software upgrade Install everything from scratch Install PRID from CDRom
Install / deinstall hard disk
Install / deinstall U.P.S.
Initialize Modem
Display SMPTE test pattern Display Delta pattern Display a 10 x 10 black square (350 x 350 pixel) Display a 10 x 10 white square (350 x 350 pixel) Display a geometry pattern (not implemented yet) Adapted Delta-Test CRT image Adapted SMPTE-Test CRT image
(Activate license) (Deactivate license) (Display current license status) (Exit submenu)
Change current date and time Set TimeZone for specific region of the world
Get time from time hosts
Level 4
1 From CD 2 From tape 3 CDRom Eject
1 Show SCSI 2 Disk Install 3 Disk Deinstall
1 Connect 2 Install 3 Activate 4 Deactivate 5 Disconnect 6 User
1 Initialize modem 2 Show versions &
settings
3 Define private modem
Repair and Service
Tools and Auxiliary Equipment
Remarks
Install patch from directly CDROM Install patch directly from tape Eject CDROM
Show SCSI-IDs Install new hard disk Deinstall hard disk
Halt the system to allow connecting the U.P.S. Install Powerchute SW from CDROM Activate Powerchute and connect to MIMOSA Deactivate Powerchute Halt the system to allow disconnecting the U.P.S. Start Power Chute U.I.
(Install modem settings) (Display the active settings and the SW / firmware version) (Edit, store and download settings of a modem not recommended by AGFA)
18.07.2000 ADC System Components Section 6.2 / 3
Page 5
Repair and Service
HOME
Tools and Auxiliary Equipment
DD+DIS198.00E
Level 1
3 Repair
Remarks
Tools to repair (V)DIPS
Level 2
7 Languages
8 Hostname
9 Backup
10Siteinfo
1 Errors
2 Infocounter
Remarks
Install and select languages
Change hostname, ip_address, subne tmask, defaultrouter from CPF - file
Backup system data
Enter site address, SN number, installer name etc. Display messages belonging to an error code
Infocounter management
Level 3
1 Copy languages 2 Info
3 Floppy Dir 4 Floppy Eject 5 Copy one
language
1 Site specific 2 Software 3 Complete
1 Show text belonging to a message id. 2 Show cure belonging to a message id.
3 Show all message id. 4 Show all available languages 5 Check available language system 0 Exit
1 Show 2 Reset 3 To Floppy 4 Floppy Dir 5 Floppy Eject 6 Download
Copy all languages from floppy to harddisk Show info about language files
Show directory list of language floppy Eject floppy Copy and install languages one by one
Save site specific data to floppy or tape Backup of all software (no images) Dump complete data to tape
Shows infocounters Reset infocounters Copy infocounters to floppy Directory list of the floppy Eject the floppy Download infocounter to calling host.
Remarks
Level 4
1 From Floppy 2 From System
Remarks
List language info on floppy List language info on the local system harddisk
3 Logfiles
4 System Info 5 Tests
6 Import /Export
↓↓↓↓
Logfile management
Display System info Test and check the PS5000 configuration
Import/Export images from/to the (V)DIPS
1 Tape 2 To Floppy­3 Floppy Dir 4 Floppy Eject 5 Delete 6 Analyze
7 Download
1 Selftest 2 Output 3 Check system
1 Pyrlist 2 Offline 3 Online 4 DirList 5 Save 6 Restore 7 TapeDir 8 Remove 9 AddOptions
Save logfile to tape Save logfiles to floppy Directory list of the floppy Eject the floppy Delete all logfiles Analyze logfiles
Download logfiles to the calling host.
Test the PS5000 configuration Send testimage to a destination (see Submit, Level3) Check (V)DIPS for file and database inconsistencies
Display a list of all .PYR files Create "offline" image starting from a .PYR Create .PYR starting from "offline" image Directory List of "offline" images Save all “offline” to tape Restore “offline” images from tape Tape Directory List Remove “offline” images from disk Additional options
1 Online Logging 2 Directory list of available logfile 3 Choose logfile 4 List contents of selected logfile 5 List end of selected logfile 6 Search for a certain string in the logfile 7 Make and create statistic file of logfiles 0 Quit
1 Compress
↓↓↓↓
Compress “offline” images
(Activate online protocol logging)
Exit submenu
Section 6.2 / 4 ADC System Components 18.07.2000
Page 6
DD+DIS198.00E
HOME
Repair and Service
Tools and Auxiliary Equipment
Level 1
Repair 2 Decompress
(contin.)
Remarks
Level 2
7 Queues
8 Submit
Queue management tool
Send images to configured destinations
Remarks
Level 3
1 Output 2 Input 3 Hold 4 Unhold 5 Cancel 6 Emergency
1 Start APIP ‘hardcopy’ of an image 2 Start DICOM ‘hardcopy’ of an image 3 Start APIP ‘archive’ of an image 4 Start DICOM ‘archive’ of an image 5 Start APIP ‘review’ of an image 6 Start DICOM ‘review’ of an image 7 Start NFS ‘softcopy’ of an image 8 Start ‘online_ip’ of an image 0 Exit
View output queue View input queue Hold a specific job Unhold a specific job Cancel a specific job Give a job emergency priority
Remarks
Level 4
3 ChangeDir 4 Download 5 Upload
Remarks
Decompress “offline” images Change directory for “offline” images Download "offline" image to the calling host Upload “offline” image from the calling host
4 Tools
5 Help
Unix Tools
Documentation about (V)DIPS
9 Reset
10 Add
Options
1 Terminal 2 Editor
3 Calculator 4 Message 5 DumpScreen 6 Download 7 FloppyDir 8 FloppyEject 9 CDrom Eject 10 Ldt
1 Service
2 ReadMe
Reset MIMOSA
Additional options
Open an UNIX terminal window Open an UNIX editor
Open a UNIX calculator tool Send a message to the User Dump the X-windows screen to a file Download (Zmodem) a file to the remote host Directory list of the floppy Eject floppy Eject CDrom LUT creation tool
Service Documentation (not implemented).
Last minute changes for this release (not implemented)
1 Reset 2 Stop 3 Start
1 Restore
2 Reboot 3 Shutdown
Stop and restart (U.I. - Background-Data-Base) Stop Mimosa (U.I. - Background-Data-Base) Start Mimosa (U.I. - Background-Data-Base)
Restore backups
Reboot the (V)DIPS Shutdown the (V)DIPS
1 Site Specific
2 Complete
Restore site specific data from floppy/tape Restore completely from tape
18.07.2000 ADC System Components Section 6.2 / 5
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use