CLEI Code: Sll3VX5J_ _
OCTAL
DSX-1
1202332L1
ONLINE
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
Quick Start Technical Support (800) 726-8663 |
61202332L1-13B |
November 2001 |
Copyright © 2001 ADTRAN All rights reserved |
TOTAL ACCESS® 4303 OCTAL DSX-1 MODULE WITH ISDN SUPPORT
FACEPLATE LEDS
ONLINE LED |
Description |
|
|
|
|
Off |
|
Blown fuse or no power supplied to the shelf |
|||
Green |
|
Online |
|
|
|
Blinking Green |
Offline |
|
|
|
|
Red |
|
Card failure |
|
|
|
Blinking Red |
Self-test failure |
|
|||
Amber |
|
Self-test in progress |
|
||
CH1 - 8 LEDs |
Description |
|
|
|
|
Off |
|
DSX-1 not configured for use |
|||
Green |
|
DSX-1 signal present & synchronized & |
|||
|
|
channel is configured for use |
|||
Red |
|
DSX-1 alarm present |
|
||
Blinking Red |
DSX-1 error |
|
|
|
|
Amber |
|
DSX-1 test in progress (includes port self-test) |
|||
|
|||||
CHAMP CONNECTOR PORT ASSIGNMENT |
|||||
SLOT |
Connector PINS |
|
SLOT |
Connector PINS |
|
|
|||||
Slot 1 |
TX1, RX1 1-8, 33-40 |
|
Slot 9 |
TX3, RX3 1-8, 33-40 |
|
Slot 2 |
TX1, RX1 9-16, 41-48 |
|
Slot 10 |
TX3, RX3 9-16, 41-48 |
|
Slot 3 |
TX1, RX1 17-24, 49-56 |
|
Slot 11 |
TX3, RX3 17-24, 49-56 |
|
Slot 4 |
TX1, RX1 25-32, 57-64 |
|
Slot 12 |
TX3, RX3 25-32, 57-64 |
|
Slot 5 |
TX2, RX2 1-8, 33-40 |
|
Slot 13 |
TX4, RX4 1-8, 33-40 |
|
Slot 6 |
TX2, RX2 9-16, 41-48 |
|
Slot 14 |
TX4, RX4 9-16, 41-48 |
|
Slot 7 |
TX2, RX2 17-24, 49-56 |
|
Slot 15 |
TX4, RX4 17-24, 49-56 |
|
Slot 8 |
TX2, RX2 25-32, 57-64 |
|
Slot 16 |
TX4, RX4 25-32, 57-64 |
|
|
|
|
|
|
|
INSTALLATION INFORMATION
•Insert the module into the desired slot labeled 1 through 16 (hot insertion permissible).
•The module connects to a pair of 64-pin Champ connectors on the backplane (see assignment and pinout on this sheet).
•The TA 4303 SCU automatically detects the presence of the module. You do not need to reboot.
•Once installed, use the terminal menus to configure and control the module (see the SCU Quick Start, 61200334L1-13A).
•Use the arrow keys on your VT-100 terminal keyboard to move to the Modules menu; press Enter in the Menu column of the appropriate module.
SPECIFICATIONS
Framing |
ESF, SF (D4) |
|
|
|
|
Line Coding |
AMI (alternate mark inversion) |
|
|
B8ZS (bipolar 8 zero substitution) |
|
|
|
|
Line Build Out |
0 to 655 feet in 133-foot increments |
|
|
|
|
Tests |
Self-test |
|
|
Local Line and Payload Loopbacks |
|
|
Remote Line and Payload Loopbacks |
|
|
|
|
Line Rate |
1.544 Mbps + 75 bps |
|
|
|
|
ISDN Support |
4:1 TDM Mapping to 3DS0 (TR397) |
|
|
frame format |
|
|
|
|
Terminating |
100 ohms + 5% |
|
Impedance |
||
|
||
|
|
|
Power |
9 watts |
|
|
|
|
Compliance |
FCC Part 15, UL 60950, NEBS Level 3 |
|
|
|
|
Temperature |
Operation: 0o C to 50o C |
|
|
Storage: –40o C to 70o C |
|
Relative Humidity |
To 95% noncondensing |
|
|
|
|
Warranty |
10 years |
|
|
|
Loading...