For more detailed documentation, visit us online at www.adtran.com.
®
NetVanta E1/FE1 Network Interface Module (NIM) |
P/N 1200868L1 |
Quick Start Guide
INSTALLATION INSTRUCTIONS
WAN-E1 DBU
SPECIFICATIONS
Operatin Modes |
Frame Relay, Multilink Frame Relay, |
|
PPP, Multilink PPP, HDLC |
E1/FE1 Interface |
Supported Standards: ITU-T G.703, ITU-T G.704 |
|
(CRC-4), ITU-T G.823, ITU-T G.797 |
|
Line Rate: 2.048 Mbps ±50 PPM |
|
FE1 Line Rate: Channelized timeslot (in multiples of |
|
56/64 kbps) |
|
Line Code: AMI or HDB3 |
|
Framing: FAS with optional CRC-4 |
|
Receiver Sensitivity: -30 dB |
|
Connector: RJ-48C |
Clock Source |
Network, internal |
Diagnostics |
Test Pattern Generation and Detection: QRSS, 511, all |
|
ones, all zeros |
|
Network loopbacks |
|
Alarm generation and detection |
|
Network performance data (15 minutes and 24 hours) |
Compliance |
FCC Part 15 Class A, EN 55022 Class A, EN 55024, |
|
EN 61000-3-2, EN 61000-3-3 |
|
AS/ACIF S016, ETSI TBR 12/TBR 13 |
|
EN 60950, IEC 60950, AS/NZS 60950 |
1.Remove power from the unit.
2.Slide the option moduleinto the option slot until the module is firmly seated against the chassis.
3.Secure the pins at both edges of the module.
4.Connect the cables to the associated device(s).
5.Complete the installation of the base unit.
6.Restore power to the unit.
NetVanta modules should be installed only in
NetVanta Series products.
WAN-E1 NETWORK (RJ-48C) CONNECTION PINOUTS
Pin Name Description
1R1 Receive data from the network - Ring 1
2T1 Receive data from the network - Tip 1
3 — Unused
4R Transmit data toward the network - Ring
5T Transmit data toward the network - Tip 6-8 — Unused
Physical |
Dimensions: 2.75-inch W x 4.25-inch D |
|
Operating Temperature: 0°C to 50°C |
|
Storage Temperature: -20°C to 70°C |
|
Relative Humidity: Up to 95 percent, noncondensing |
An optional Dial Backup Interface Module (DIM) is required for dial backup applications.
For a description of the DBU pinouts, refer to the Quick Start Guide included with your DIM shipment.
Important: For additional details on product features, specifications, installation, and safety, refer to the appropriate Hardware Installation Guide on the ADTRAN OS System Documentation
CD shipped with the base unit and available online at www.adtran.com.
Quick Start Guide, 61200868L1-13D, July 2005 |
ADTRAN Technical Support +1-256-963-8716 |
Copyright © 2005 ADTRAN, All Rights Reserved |