AcuRite Indoor or Outdoor Clock Instruction Manual

Instruction Manual

Indoor or Outdoor Clock

Set the Time

1

Turn the set knob on the back of the clock in either direction.

•

2

Install or Replace Batteries

AcuRite recommends high quality alkaline or lithium batteries for the

•

best product performance. Heavy duty or rechargeable batteries are not
recommended.

The clock requires lithium batteries in low temperature conditions. Cold
temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the clock for temperatures below -4ºF / -20ºC.

Insert 1 x AA alkaline or lithium batteries into the battery compartment, as
shown. Follow the polarity (+/-) diagram in the battery compartment.

DO NOT HANG IN DIRECT SUNLIGHT!

For the most accurate temperature readings choose a location that will not be
exposed to direct sunlight or other direct heat sources.

Set the Time

1

Install Battery

2

1 AA battery

•

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries

in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT

recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to