Acer T111B, N243, PN-SX12, S5201M, PS-X11M User Manual

3.75 Mb
Loading...

Acer Projector

P5403/N243/PN-SX12/S5201M/

T111B/PS-X11M Series

User's Guide

Copyright © 2010. Acer Incorporated.

All Rights Reserved.

Acer Projector P5403/N243/PN-SX12/S5201M/T111B/PS-X11M Series User's Guide

Original Issue: 07/2010

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector P5403/N243/PN-SX12/S5201M/T111B/PS-X11M Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

iii

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

Install the power supply unit before connecting the power cord to the AC power outlet.

Unplug the power cord before removing the power supply unit from the projector.

If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

Warnings!

Do not use this product near water.

Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.

Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

iv

To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company.

Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

v

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

the power cord or plug is damaged, cut or frayed

liquid was spilled into the product

the product was exposed to rain or water

the product has been dropped or the case has been damaged

the product exhibits a distinct change in performance, indicating a need for service

the product does not operate normally after following the operating instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

Turn on the projector first and then signal sources.

Do not place the product in the following environments:

Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.

Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.

Locations near fire alarms.

Locations with an ambient temperature above 40 ºC/104 ºF.

Locations where the altitudes are higher than 10000 feet.

Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It

vi

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Do not keep using this product to break or drop it. In this case contact your dealer for inspection.

Do not face the projector lens to the sun. It can lead to fire.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp breakage, fire, electric shock or other trouble. The best way is to wait for the fan to stop before turning main power off.

Do not touch the air outlet grille and bottom plate which become hot.

Clean the air filter frequently. The temperature inside may rise and cause damage when the filter/ventilation slots are clogged with dirt or dust.

Do not look into the air outlet grille when projector is operating. It may hurt your eyes.

Always open the lens shutter or remove the lens cap when the projector is on.

Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

Do not operate lamps beyond the rated lamp life. It could cause it to break on rare occasions.

Never replace the lamp assembly or any electronic components unless the projector is unplugged.

The product will detect the life of the lamp itself. Please be sure to change the lamp when warning messages display.

When changing the lamp, please allow the projector to cool down, and follow all changing instructions.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.

Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage.

This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

vii

Caution for Listening

To protect your hearing, follow these instructions.

Increase the volume gradually until you can hear clearly and comfortably.

Do not increase the volume level after your ears have adjusted.

Do not listen to music at high volumes for extended periods.

Do not increase the volume to block out noisy surroundings.

Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

"Lamp(s) contain Mercury, Dispose Properly."

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

viii

First Thing First

Usage Notes

Do:

Turn off the product before cleaning.

Use a soft cloth moistened with mild detergent to clean the display housing.

Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Don't:

Block the slots and openings on the projector provided for ventilation.

Use abrasive cleaners, waxes or solvents to clean the unit.

Use under the following conditions:

In extremely hot, cold or humid environments.

In areas susceptible to excessive dust and dirt.

Near any appliance that generates a strong magnetic field.

Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

Please do not open or disassemble the product as this may cause electric shock.

When changing the lamp, please allow the projector to cool down, and follow all changing instructions.

This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.

Reset the "Lamp Hour Reset" function from the Onscreen Display "Management" menu after replacing the lamp module.

When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power.

Turn on the projector first and then the signal sources.

Do not use lens cap when projector is in operation.

When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Information for Your Safety and Comfort First Thing First

Usage Notes

Precautions

Introduction

Product Features

Package Overview

Projector Overview Projector Outlook Control Panel

Remote Control Layout

Getting Started

Connecting the Projector Turning the Projector On/Off

Turning On the Projector

Turning Off the Projector Adjusting the Projected Image

Adjusting the Height of the Projected Image How to Optimize Image Size and Distance

How to Get a Preferred Image Size by Adjusting Distance and Zoom

User Controls

Installation Menu

Acer Empowering Technology

Onscreen Display (OSD) Menus Color

Image

Setting Management Audio

Timer Language

iii

Contents

viii

 

viii viii

1

1

2

3

3

4

5

7

7

9

9

10

11

11

12

14

16

16

17

18

19

21

23

31

32

33

33

Appendices

34

Troubleshooting

34

LED & Alarm Definition Listing

38

Replacing the Lamp

39

Ceiling Mount Installation

40

Specifications

43

Compatibility Modes

45

Regulations and safety notices

49

1

Introduction

Product Features

This product is a single-chip DLP® projector, including the following outstanding features:

DLP® technology

S5201M/T111B/PS-X11M: Native 1024 x 768 XGA resolution P5403/N243/PN-SX12: Native 1400 x 1050 SXGA+ resolution 4:3 / 16:9 aspect ratio supported

Acer ColorBoost technology delivers vivid, life-like images

High brightness and contrast ratio

Versatile display modes enable optimum performance in any situation

NTSC/PAL/SECAM compatible and HDTV (720p, 1080i) supported

Lower power consumption and economy (ECO) mode extends lamp life

Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement

Empowering Key reveals Acer Empowering Technology functions (Acer eView, eTimer, eOpening, ePower Management) for easy adjustment of settings

Advanced keystone correction delivers optimum presentations

Multi-language Onscreen Display (OSD) menus

Full-function remote control

P5403/N243/PN-SX12: Manual focus projection lens zooms up to 1.3X

2X digital zoom and pan move function

Microsoft® Windows® 2000, XP, 7, Vista® OS compliant

LAN settings enable remote management of projectors via a web browser

Ability to display 3D images

English

English

2

Package Overview

This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.

Projector with lens cap

Power cord

VGA cable

Composite video cable

Security card

User’s guide (CD-ROM)

 

Acer Projector

 

 

Quick Start Guide

 

Remote control

Quick start guide

Battery x 2

Carrying case

USB cable (for S5201M/

Interactive Pen (for S5201M/

 

 

 

 

 

T111B/PS-X11M)

T111B/PS-X11M)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dust filter (Optional)

3

Projector Overview

Projector Outlook

Front / upper side

 

1

(P5403/N243/PN-SX12)

5

1

(S5201M/T111B/PS-X11M)

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

3

 

 

 

 

 

8

 

3

 

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

#

 

 

 

Description

 

 

#

 

 

Description

 

 

1

Power key and Power indicator

 

5

Control panel

 

 

 

 

 

LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Projection lens

 

 

 

 

6

Zoom ring

 

 

 

 

3

Elevator button

 

 

 

 

7

Focus ring

 

 

 

 

4

Lens cap

 

 

 

 

 

8

Remote control receiver

 

Rear side

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(S5201M/T111B/PS-X11M)

 

 

 

(P5403/N243/PN-SX12)

 

 

 

1

23

4

5 6

7

8

9 10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

3

6 2

7

4

8

9 16 10

 

 

 

 

 

 

 

DC OUT

 

 

 

 

 

 

 

 

 

 

1213

 

 

 

 

11 14

12

 

 

 

 

 

 

 

15

 

 

 

 

 

 

 

 

 

 

 

 

 

#

 

 

 

Description

 

 

#

 

 

Description

 

 

1

Remote control receiver

 

 

9

S-Video input connector/

 

2

USB connector (Type B)

 

 

 

Composite video input connector

3

LAN (RJ45 port for 10/100M

 

10

Audio input connector/

 

 

 

Ethernet)

 

 

 

 

 

 

Audio output connector

 

4

HDMI connector

 

 

 

 

11

Microphone input connector

5

USB connector (Type A)

 

 

12

Tilt adjusting wheel

 

 

6

RS232 connector

 

 

 

 

13

Power socket

 

 

 

 

7

Monitor loop-through output

 

14 12V DC output connector

 

 

connector

 

 

 

 

 

 

 

 

 

 

 

 

 

8

PC analog signal/HDTV/component

15

Kensington™ lock port

 

 

 

video input connector (VGA IN 1/

16 Audio input connector (L/R)

 

VGA IN 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

English

English

4

Control Panel

 

1

 

 

7

 

2

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

 

 

 

 

4

 

 

9

 

5

 

 

 

 

 

 

 

 

6

 

 

 

 

 

10

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

#

Function

 

 

Description

1

LAMP

Lamp indicator LED

 

 

 

 

 

 

 

 

 

2

POWER

Power indicator LED

 

 

 

 

 

 

 

 

 

3

Power key

Refer to the "Turning the Projector On/

 

 

 

 

Off" section.

 

 

 

 

 

 

 

 

 

4

Keystone

Adjusts image distortion caused by tilting

 

 

 

 

projection (±40 degrees).

 

 

 

 

 

 

 

 

 

5

MENU

Launches the Onscreen Display (OSD)

 

 

 

 

menu, returns to the previous step for

 

 

 

 

the OSD menu operation or exits the

 

 

 

 

OSD menu.

 

 

 

 

Confirms your selection of items.

 

 

 

 

 

 

 

 

 

6

RESYNC

Automatically synchronizes the projector

 

 

 

 

to the input source.

 

 

 

 

 

 

 

 

 

7

TEMP

Temp indicator LED

 

 

 

 

 

 

 

 

 

8

Empowering key

Enables unique Acer functions: eView,

 

 

 

 

eTimer, eOpening, ePower Management.

 

 

 

 

 

 

 

 

 

9

Four directional select keys

Selects items or makes adjustments to your

 

 

 

 

selection.

 

 

 

 

 

 

 

 

 

10

SOURCE

Chooses RGB, component video, S-Video,

 

 

 

 

composite video, HDMI™ or HDTV source.

 

 

 

 

 

 

 

 

 

Remote Control Layout

5

English

#

Function

Description

1

Infrared

Sends signals to the projector.

 

transmitter

 

 

 

 

2

POWER

Refer to the "Turning the Projector On/Off" section.

 

 

 

3

FREEZE

To pause the screen image.

 

 

 

4

RESYNC

Automatically synchronizes the projector to the input

 

 

source.

 

 

 

5

BACK

Goes back to the previous selection.

 

 

 

6

Keystone

Adjusts image distortion caused by tilting projection

 

 

(±40 degrees).

 

 

 

 

Four

Selects items or makes adjustments to your selection.

 

directional

 

 

select keys

 

 

 

 

7

Mouse

This function is not available with the projector.

 

button

 

 

 

 

8

Four

Selects the media files in four directions.

 

directional

 

 

select pad

 

 

 

 

9

VOL +/-

Increases/decreases the volume.

 

 

 

10

Empowering key

Enables unique Acer functions: eView, eTimer,

 

 

eOpening, ePower Management.

 

 

 

English

6

#

 

 

 

 

 

 

Function

Description

11

 

 

 

 

 

 

Rewind

Rewinds/Plays/Pauses/Stops/Fast-forwards the playing

 

 

 

 

 

 

 

 

Play/Pause

media files.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast-forward

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

VGA

To change source to VGA. This connector supports

 

 

 

 

 

 

 

 

analog RGB, YPbPr (480p/576p/720p/1080i/1080p),

 

 

 

 

 

 

 

 

and YCbCr (480i/576i).

 

 

 

 

 

 

 

 

 

13

COMPONENT

To change source to Component video. This

 

 

 

 

 

 

 

 

connector supports YPbPr.

 

 

 

 

 

 

 

 

 

14

SD/USB A

To change source to SD/USB A. This projector supports

 

 

 

 

 

 

 

 

various formats for photo/audio/video files.

 

 

 

 

 

 

 

 

 

15

HDMI™/DVI

To change source to HDMI™/DVI (for the model with

 

 

 

 

 

 

 

 

HDMI™/DVI connector).

 

 

 

 

 

 

 

 

 

16

Keypad 0~9

Press "0~9" to input a password in the "Setting >

 

 

 

 

 

 

 

 

Security" OSD.

 

 

 

 

 

 

 

 

 

17

Laser pointer

Shines the laser point light when the Laser button is

 

window

pressed.

 

 

 

 

 

 

 

 

 

18

HIDE

Press "HIDE" to hide screen image; press again to

 

 

 

 

 

 

 

 

display the image.

 

 

 

 

 

 

 

 

 

19

ASPECT RATIO

To choose the desired aspect ratio (Auto/4:3/16:9).

 

 

 

 

 

 

 

 

 

20

SOURCE

Chooses RGB, component video, S-Video, composite

 

 

 

 

 

 

 

 

video, HDMI™, or HDTV source.

21

ZOOM

Zooms the projector display in or out.

22

ENTER

Confirms your selection of items.

23

Laser

Emits visible laser pointer light for presentation

 

purposes. This function is not available for the

 

 

 

 

projectors sold in the Japanese market.

24

MENU

Launches the Onscreen Display (OSD) menu, returns

 

 

to the previous step for the OSD menu operation or

 

 

exits the OSD menu.

25

PAGE ^/v

For computer mode only. Use the button to select the

 

 

next or previous page. This function is only available

 

 

when connected to a computer via a USB cable.

 

 

 

26

S-VIDEO

To change source to S-Video.

 

 

 

27

VIDEO

To change source to Composite video.

 

 

 

28

USB B

To change source to USB B.

 

 

 

29

LAN/WiFi

To change source to LAN/WiFi. (for LAN/wireless

 

 

compatible models)

7

Getting Started

Connecting the Projector

P5403/N243/PN-SX12

VGA

 

 

 

 

5

 

 

 

 

DVD player, Set-top box,

 

11

USB

 

HDTV receiver

RS232

 

 

 

 

 

S-Video/

 

Display

D-Sub

 

 

 

Video

 

 

 

 

10

 

 

 

Output

 

 

 

R B G

Y 2

 

 

8

9

W

R

 

 

 

 

 

RS232

 

R B G

 

 

 

D-Sub

 

 

 

 

 

6

 

 

 

 

 

 

 

 

7

 

3

 

5

 

 

 

 

 

2

 

 

 

 

 

 

 

Speakers

 

10

 

 

 

1

 

D-Sub

HDTV adapter

W

 

 

USB

D-Sub

R

 

 

 

 

 

 

 

 

 

 

 

 

 

Y

4

 

 

 

 

#

Description

#

Description

 

1

Power cord

7

RS232 cable

 

2

VGA cable

8

HDMI cable

 

3

VGA to component video/HDTV

9

3 RCA component cable

 

 

adapter

 

 

 

4

Composite video cable

10

RJ45 cable

 

5

Audio cable

11

USB cable

 

6

S-Video cable

 

 

 

English

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

English

8

S5201M/T111B/PS-X11M

 

 

VGA

 

 

 

 

5

11

USB

 

DVD player, Set-top box,

 

 

 

HDTV receiver

RS232

Display

 

S-Video/

 

 

 

 

D-Sub

 

 

Video

 

 

 

10

 

 

Output

 

 

R B G

2

Y

 

8

9

R

 

W

 

 

RS232

D-Sub

Speakers

 

 

 

 

R B G

 

 

 

 

 

6

 

 

10

7

 

3

 

 

 

 

2

5

 

 

 

 

 

 

 

1

 

 

Microphone

 

 

 

D-Sub HDTV adapter

 

 

 

USB

D-Sub

 

 

 

 

 

 

 

 

 

 

MIC.

 

 

 

 

12

 

 

 

 

 

 

Y

4

 

 

 

 

 

#

 

Description

#

Description

 

1

Power cord

 

7

RS232 cable

 

2

VGA cable

 

8

HDMI cable

 

3

VGA to component video/HDTV

9

3 RCA component cable

 

 

adapter

 

 

 

 

4

Composite video cable

10

RJ45 cable

 

5

Audio cable

 

11

USB cable

 

6

S-Video cable

12*

USB storage device

 

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

Note: "*" USB drive limitation, do not support power.

9

Turning the Projector On/Off

Turning On the Projector

1Remove the lens cap.

2Ensure that the power cord and signal cable are securely connected. The Power LED will light red.

3Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue.

4Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.

If the screen displays "Lock" & "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected.

If the screen displays "No Signal", please make sure the signal cables are securely connected.

If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.

2&3

2&3

English

1

1

Lens cap

Lens cap

 

English

10

Turning Off the Projector

1To turn the projector off, press the power button. This message appears:

"Please press the power button again to complete the shutdown process." Press the power button again.

2The LED power indicator will turn RED and blink rapidly after the projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.

3As long as the power cord remains plugged in, you can press the power button to turn the projector immediately back on anytime during the 2-minute shutdown process.

4Once the system has finished cooling, the LED power indicator will stop blinking and turn solid red to indicate standby mode.

5It is now safe to unplug the power cord.

Warning indicators:

"Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated.

The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center.

"Fan failed. Lamp will automatically turn off soon."

This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center.

Note: Whenever the projector automatically shuts down and the LED lamp indicator turns solid red, contact your local reseller or service center.

11

Adjusting the Projected Image

Adjusting the Height of the Projected Image

The projector is equipped with an elevator foot for adjusting the image height.

To raise the image:

1Press the elevator button.

2Raise the image to the desired height angle, then release the button to lock the elevator foot into position.

3Use Tilt adjusting wheel to fine-tune the display angle.

To lower the image:

1Press the elevator button.

2Lower the image to the desired height angle, then release the button to lock the elevator foot into position.

3Use Tilt adjusting wheel to fine-tune the display angle.

English

1

Elevator button

3

2

3

Tilt adjusting wheel

Elevator foot

Tilt adjusting wheel

English

12

How to Optimize Image Size and Distance

Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen.

P5403/N243/PN-SX12

If the projector is 3 m from the screen, good image quality is possible for image sizes between 75" and 98".

Note: Remind as below figure, the space of 165 cm height is required when the projector is located at 3 m distance.

Max screen size

Min screen size

A

3 m

Desired distance

B 98"

 

 

75"

 

 

 

 

 

 

Height:

 

Height:

165 cm

 

From

 

126 cm

base to

 

 

top of

 

 

image

 

 

 

 

 

 

Desired

Minimum Screen Size (Min zoom)

Maximum Screen Size (Max zoom)

 

 

 

 

 

 

 

 

From base to

 

 

From base to

Distance

Diagonal

 

Diagonal

 

(m)

(inch)

W (cm) x H (cm)

top of image

(inch)

W (cm) x H (cm)

top of image

< A >

< B >

 

(cm)

< B >

 

(cm)

 

< C >

 

< C >

 

 

 

 

 

 

 

 

 

 

 

 

1

25

51 x 38

42

33

66 x 50

56

 

 

 

 

 

 

 

1.5

38

76 x 57

64

49

99 x 75

83

 

 

 

 

 

 

 

2

50

102 x 76

84

65

132 x 99

109

 

 

 

 

 

 

 

2.5

63

127 x 95

106

81

166 x 124

136

 

 

 

 

 

 

 

3

75

152 x 114

126

98

199 x 149

165

3.5

88

178 x 133

148

114

232 x 174

192

 

 

 

 

 

 

 

4

100

203 x 152

168

130

265 x 199

219

 

 

 

 

 

 

 

4.5

113

228 x 171

190

147

298 x 224

248

 

 

 

 

 

 

 

5

125

254 x 190

211

163

331 x 248

274

 

 

 

 

 

 

 

6

150

305 x 228

253

196

397 x 298

330

 

 

 

 

 

 

 

7

175

355 x 266

295

228

464 x 348

384

 

 

 

 

 

 

 

8

201

406 x 305

338

261

530 x 397

440

 

 

 

 

 

 

 

9

226

457 x 343

381

293

596 x 447

493

 

 

 

 

 

 

 

10

251

508 x 381

423

326

662 x 497

549

 

 

 

 

 

 

 

11

276

558 x 419

465

359

728 x 546

605

 

 

 

 

 

 

 

12

301

609 x 457

507

391

795 x 596

658

Zoom Ratio: 1.3 x

13

S5201M/T111B/PS-X11M

If the projector is 3 m from the screen, good image quality is possible for image sizes around 242".

Note: Remind as below figure, the space of 480 cm height is required when located at 3 m distance.

B242"

Height: 480 cm From base to top of image

 

3 m

C

A

Desired distance

 

 

 

Desired

Minimum Screen Size (Min zoom)

 

 

 

 

 

From base to

Distance

Diagonal

 

(m)

(inch)

W (cm) x H (cm)

top of image

< A >

< B >

 

(cm)

 

 

 

< C >

0.5

40

82 x 61

80

 

 

 

 

1

81

164 x 123

160

 

 

 

 

1.5

121

246 x 184

240

 

 

 

 

2

161

328 x 246

320

 

 

 

 

2.5

202

410 x 307

400

 

 

 

 

3

242

492 x 369

480

3.5

282

574 x 430

559

 

 

 

 

4

323

656 x 492

639

 

 

 

 

4.5

363

738 x 553

719

 

 

 

 

5

403

820 x 615

799

 

 

 

 

6

484

984 x 738

959

Zoom Ratio: 1.0 x

English

English

14

How to Get a Preferred Image Size by Adjusting Distance and Zoom

The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring.

P5403/N243/PN-SX12

To obtain an image size of 50" set the projector at a distance between 1.5 m and 2.0 m from the screen and adjust the zoom level accordingly.

A

D

 

50"

 

Desired

Height:

image size

84 cm

 

From base

 

to top of

 

image

1.5 m B

 

Desired distance

 

2.0 m

 

C

 

Desired Image Size

Distance (m)

Top (cm)

 

 

 

 

 

Diagonal (inch)

W (cm) x H (cm)

Max zoom

Min zoom

From base to top of

< A >

< B >

< C >

image < D >

 

 

 

 

 

 

30

61 x 46

 

1.2

51

 

 

 

 

 

40

81 x 61

1.2

1.6

67

 

 

 

 

 

50

102 x 76

1.5

2.0

84

60

122 x 91

1.8

2.4

101

 

 

 

 

 

70

142 x 107

2.1

2.8

118

 

 

 

 

 

80

163 x 122

2.5

3.2

135

 

 

 

 

 

90

183 x 137

2.8

3.6

152

 

 

 

 

 

100

203 x 152

3.1

4.0

168

 

 

 

 

 

120

244 x 183

3.7

4.8

202

 

 

 

 

 

150

305 x 229

4.6

6.0

253

 

 

 

 

 

180

366 x 274

5.5

7.2

303

 

 

 

 

 

200

406 x 305

6.1

8.0

337

 

 

 

 

 

250

508 x 381

7.7

10.0

421

 

 

 

 

 

300

610 x 457

9.2

 

505

 

 

 

 

 

Zoom Ratio: 1.3 x

15

S5201M/T111B/PS-X11M

To obtain an image size of 50" set the projector at a distance 0.6 m from the screen.

A

D

50"

 

Desired

 

image size

Height:

 

99 cm

 

From

 

base to

 

top of

 

image

0.6 m B& C

 

Desired distance

 

Desired Image Size

Distance (m)

Top (cm)

 

 

 

 

 

Diagonal (inch)

W (cm) x H (cm)

Max zoom

Min zoom

From base to top of

< A >

< B >

< C >

image < D >

 

 

 

 

 

 

30

61 x 46

0.4

0.4

59

 

 

 

 

 

40

81 x 61

0.5

0.5

79

 

 

 

 

 

50

102 x 76

0.6

0.6

99

60

122 x 91

0.7

0.7

119

 

 

 

 

 

70

142 x 107

0.9

0.9

139

 

 

 

 

 

80

163 x 122

1.0

1.0

158

 

 

 

 

 

90

183 x 137

1.1

1.1

178

 

 

 

 

 

100

203 x 152

1.2

1.2

198

 

 

 

 

 

120

244 x 183

1.5

1.5

238

 

 

 

 

 

150

305 x 229

1.9

1.9

297

 

 

 

 

 

180

366 x 274

2.2

2.2

357

 

 

 

 

 

200

406 x 305

2.5

2.5

396

 

 

 

 

 

250

508 x 381

3.1

3.1

495

 

 

 

 

 

300

610 x 457

3.7

3.7

594

 

 

 

 

 

Zoom Ratio: 1.0 x

English

English

16

User Controls

Installation Menu

The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.

1Turn on the projector by pressing (POWER) on the control panel or remote control.

2Press "MENU" on the control panel or remote control to launch the OSD for projector installation and maintenance.

3The background pattern acts as a guide to adjust the calibration and alignment settings, such as screen size and distance, focus and more.

4The Installation menu includes the following options:

Projection method

Menu location

Keystone settings

Language settings

Reset to factory default functions

Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.

5Press "MENU" anytime to exit the menu and return to the Acer welcome screen.

17

Acer Empowering Technology

Empowering Key

Acer Empowering Key provides three

 

Acer unique functions: "Acer eView

 

Management", "Acer eTimer

 

Management", "Acer eOpening

 

Management" and "Acer ePower

 

Management". Press " " for more

 

than one second to launch the

 

Onscreen Display main menu to modify

 

its function.

 

 

Acer eView Management

Press " " to launch "Acer eView

 

Management".

 

"Acer eView Management" is for

 

display mode selection. Please refer to

 

the "Onscreen Display (OSD) Menus"

 

section for more details.

 

The 3D and 3D Sync Invert functions

 

offer quick access of 3D functions here.

 

 

Acer eTimer Management

Press " " to launch "Acer eTimer

 

Management".

 

"Acer eTimer Management" provides

 

the reminding function for

 

presentation time control. Please refer

 

to the "Onscreen Display (OSD) Menus"

 

section for more details.

 

 

Acer eOpening Management

Press " " to launch "Acer eOpening

 

Management".

 

"Acer eOpening Management" allows

 

users to change the Startup Screen to

 

their personalized image. Please refer

 

to the "Onscreen Display (OSD) Menus"

 

section for more details.

 

 

Acer ePower Management

Press " " to launch "Acer ePower

 

Management".

 

"Acer ePower Management"provides

 

you one shortcut to save the lamp and

 

projector’s life. Please refer to the

 

"Onscreen Display (OSD) Menus"

 

section for more details.

 

 

English

English

18

Onscreen Display (OSD) Menus

The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings.

Using the OSD menus

To open the OSD menu, press "MENU" on the control panel or remote control.

When the OSD is displayed, use to select an item in the main menu.

After selecting the desired main menu item, press to enter a submenu for feature setting.

Use to select the desired item and adjust the settings by using

.

Select the next item to be adjusted in the submenu and adjust as described above.

Press "MENU" on the control panel or remote control, the screen will return to the main menu.

To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings.

Main menu

Setting

Submenu

Color

19

English

There are many factory presets optimized for various types of images.

 

Bright: For brightness optimization.

 

Presentation: For meeting presentation with higher

Display Mode

 

brightness.

 

 

 

Standard: For common environment.

 

Video: For playing video in a bright environment.

 

Education: For education environment.

 

User: Memorize user’s settings.

 

 

 

Use this function to choose a proper color according to the

 

wall. There are several choices, including white, light

Wall Color

yellow, light blue, pink, dark green. It will compensate the

 

color deviation due to the wall color to show the correct

 

image tone.

 

 

 

 

Adjusts the brightness of the image.

Brightness

Press

to darken the image.

 

Press

to lighten the image.

 

 

 

Controls the degree of difference between the lightest

 

and darkest parts of the picture. Adjusting the contrast

Contrast

changes the amount of black and white in the image.

 

 

 

Press

to decrease the contrast.

 

Press

to increase the contrast.

 

 

Color

Adjusts the color temperature. At higher color

temperatures, the screen looks colder; at lower color

Temperature

temperatures, the screen looks warmer.

 

 

 

Degamma

Effects the representation of dark scenery. With greater

gamma value, dark scenery will look brighter.

 

English

20

Color R

Adjusts the red color.

 

 

Color G

Adjusts the green color.

 

 

Color B

Adjusts the blue color.

 

 

 

Adjusts a video image from black and white to fully

 

saturated colors.

Saturation

Press

to decrease the amount of color in the

image.

 

 

 

Press to increase the amount of color in the image.

Adjusts the color balance of red and green.

Tint

Press

to increase the amount of green in the

image.

 

 

 

Press to increase the amount of red in the image.

Adjusts the color range of the HDMI image data to prevent color display error.

 

Auto: Automatically adjusts the color range by

HDMI Color

information from the player.

Range

Limited Range: Processes the input image as limited

 

color range data.

 

Full Range: Processes the input image as full color

 

range data.

Note: "Saturation" and "Tint" functions are not supported under computer, or HDMI (PC) mode.

Note: "HDMI Color Range" is only available when the input signal is HDMI.

Image

21

English

 

 

 

 

Front-Desktop: The factory default setting.

 

 

 

 

Front-Ceiling: When you select this function, the

 

 

 

 

 

 

projector inverts the image for ceiling-mounted

 

 

projection.

Projection

 

 

 

Rear-Desktop: When you select this function, the

 

 

 

 

projector reverses the image so that you can project

 

 

 

 

behind a translucent screen.

 

 

 

 

Rear-Ceiling: When you select this function, the

 

 

 

 

 

 

projector reverses and inverts the image at same time.

 

 

You can project from behind a translucent screen with

 

 

ceiling mounted projection.

 

 

 

 

 

 

Use this function to choose your desired aspect ratio.

Aspect

Auto: Keeps the image with original width-height ratio

 

and maximizes the image to fit native horizontal or

Ratio

 

vertical pixels.

 

4:3: The image will be scaled to fit the screen and

 

 

displayed using a 4:3 ratio.

 

16:9: The image will be scaled to fit the screen and

 

 

displayed using a 16:9 ratio.

 

 

 

 

 

 

Manually adjusts image distortion caused by tilting projection

Keystone

(±40 degrees).

 

 

 

 

 

Adjusts the sharpness of the image.

Sharpness

Press

to decrease the sharpness.

Press to increase the sharpness.

English

22

H. Position

Press

to move the image left.

(Horizontal

 

 

Position)

Press

to move the image right.

 

 

 

 

V. Position

Press

to move the image down.

(Vertical

 

 

Position)

Press

to move the image up.

 

 

 

Changes the projector’s refresh rate to match the frequency

Frequency

of your computer’s graphics card. If you experience a vertical

flickering bar in the projected image, use this function to

 

 

correct it.

 

 

 

 

Synchronizes the signal timing of the display with the graphics

Tracking

card. If you experience an unstable or flickering image, use

 

this function to correct it.

 

 

 

Adjusts the overscan ratio of the HDMI image on screen.

 

Auto: Automatically adjusts the overscan ratio by

HDMI Scan Info

 

information from the player.

 

Underscan: Always no overscan on the HDMI image.

 

Overscan: Always keep overscan on the HDMI image.

 

 

 

Choose "On" to enable DLP 3D function.

 

NVIDIA 3D Vision (for S5201M/T111B/PS-X11M)

 

Select this item while using NVIDIA 3D glasses, IR emitter,

 

NVIDIA graphics card and NVIDIA compliant 3D games or 3D

 

movies with corresponding SW player. Please visit NVIDIA URL

 

(http://www.nvidia.com/object/3D_Vision_Requirements.html)

3D

to check detailed system configuration.

 

DLP 3D

 

 

Select this item while using DLP 3D glasses, quad buffer

 

(NVIDIA/ATI...) graphics card and HQFS format file or DVD

 

with corresponding SW player.

 

Off

 

 

Turns off 3D mode.

 

 

 

If you see a discrete or overlapping image while wearing DLP

3D Sync Invert

3D glasses, you may need to execute "Invert" to get best

match of left/right image sequence to get the correct image

 

 

(for DLP 3D).

 

 

 

 

Choose "On" to display the 3D warning message.

3D Warning

 

 

 

Message

 

 

 

 

 

 

 

23

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode.

Note: "Sharpness" function is not supported under computer mode.

Note:

The 3D function is supported by VGA source only. Please see the timing table for detailed 3D timings.

It needs correct settings on graphics card 3D application program for correct 3D display.

The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on web page below.

-NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/ 3D_Drivers_Downloads.html

-Stereoscopic Player: http://www.3dtv.at/Downloads/Index_en.aspx

-DDD TriDef Media Player: http://www.tridef.com/download/TriDef-3-D- Experience-4.0.2.html

Note: "3D Sync Invert" is only available when DLP 3D is enabled.

Setting

(P5403/N243/PN-SX12) (S5201M/T111B/PS-X11M)

English

Menu Location

Chooses the OSD menu location on the display screen.

 

 

 

Use this function to select your desired startup screen. If you

 

change the setting, it will take effect when you exit the OSD

Startup Screen

menu.

Acer: The default startup screen of your Acer projector.

 

 

User: Use the memorized picture from the "Screen

 

 

Capture" function.

 

 

 

English

24

Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below.

Notice:

Before proceeding with the following steps, make sure that the "Keystone" is set to the default value "0", and the "Aspect Ratio" is set to "4:3". For details, refer to the "Image" section.

Change the "Startup Screen" from the default setting "Acer" to "User".

Press "Screen Capture" to customize the startup screen.

A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose "No" to cancel the screen capture and exist the onscreen display (OSD).

Screen Capture A message appears stating that the screen capture is in progress.

When the screen capture is finished, the message disappears and the original display is shown.

The customized startup screen takes effect when there is a new input signal or when you restart the projector.

Note: This screen capture function is limited by 4:3 aspect ratio only.

Note: For XGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 1024 x 768 before using this function. Note: For SVGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 800 x 600 before using this function. Note: For WXGA models, to get best quality for your desired image, it is suggested that you set the PC resolution to 1280 x 800 before using this function.

Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-

Closed Caption Video input signal is selected and its system format is NTSC.

Set your screen aspect ratio to 4:3. The function is not available when the aspect ratio is "16:9" or 16:9 format detected under "Auto mode".

25

 

Security

 

 

This projector provides a useful security function for the

 

administrator to manage the projector.

 

Press

to change the "Security" setting. If the security

 

function is enabled, your must enter "Administrator

Security

Password" first before changing the security setting.

The factory default of "Administrator Password" is "1234".

Select "On" to enable the security function. You have to enter password depending on the "Security Mode". Please refer to "User Password" section for details.

If "Off" is selected, you can switch on the projector without password.

Timeout (Min.)

Once "Security" is set to "On", you can set timeout function.

Press to select timeout duration.

The range is from 10 to 990 minutes.

When time is up, the projector will request you to enter the password again.

The factory default setting of "Timeout (Min.)" is "Off".

Once the security function is enabled, the projector will request you to enter password when switching on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue.

User Password

Press to set up or change "User Password".

Use the numerical keys on the remote control to set the password and press "MENU" to confirm.

To delete the digits, Press .

Enter the password again when you see "Confirm Password" displayed.

The password should be 4~8 digits in length.

If you select "Request password only after plugging power cord", you are requested to input the password every time the power cord is plugged.

If you select "Always request password while projector turns on", you are requested to input the password every time the projector is turned on.

English

English

26

Administrator Password

You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box is displayed.

Press to change "Administrator Password".

The factory default of "Administrator Password" is

"1234".

If you forget your administrator password, do the following to retrieve the administrator password:

Enter the unique 6-digit "Universal Password" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is.

If the Security Card is lost, please contact your local Acer

service center. Lock User Startup Screen

The default value is "Off". If it is "On", you cannot change the startup screen arbitrarily.

 

Selecting "On" enables the function. The projector can output

 

a VGA signal when it is in standby mode and the VGA IN (or

 

VGA IN 1) and VGA OUT sockets are correctly connected to the

VGA OUT

devices.

 

 

Enabling this function slightly increases the standby

 

power consumption.

27

 

The Interactive Pen can work in place of your regular

 

computer mouse. Just hold the pen in your hand, and point it

 

at the projected image to point, click, and drag. It gives you

 

more flexibility to operate your computer without standing

 

next to it.

 

Pen Function

 

To use the Interactive Pen, select "Enable" to activate this

 

 

function.

 

Link Channel

Interactive Pen

Set a channel to differentiate between projectors and

 

communicate with the Interactive Pen.

Setting

 

Moving Key

(for S5201M/

To use the moving key, select "Enable" to activate this

T111B/PS-X11M)

 

 

function. When it is activated, you can only move the

 

 

pointer by long-pressing the wheel button.

 

Double Click Speed

 

Adjust the double click speed of your pen to make it

 

 

response faster or slower to meet your needs.

 

Favorite Function Key

 

Set a function key so that you can select it in the quick

 

 

menu "Quick Interactive Pen Function".

For more details, see the notes following this table.

Reset

Press

after choosing "Yes" to return the display

parameters on all menus to the factory default settings.

 

English

English

28

To connect your projector to the network:

1Take a RJ45 cable and connect one end to the LAN input jack of the projector and the other end to the RJ45 port.

2Enter the LAN Setting menu. The "Enter Administrator Password" dialogue box is displayed.

3Enter "Administrator Password". The next level menu is displayed.

The factory default of "Administrator Password" is "1234". You can change it in the Setting > Security > Administrator Password menu.

4

Select LAN in this menu and press

to select "On".

 

 

 

5

Make sure DHCP is on, and press

 

to select Apply and

 

press

.

 

 

6

Re-enter the menu and note down the IP address

LAN Setting

displayed in the row of Projector IP Address.

(for P5403/

 

 

 

 

N243/PN-SX12) If your are not in a DHCP environment, set DHCP to "Off" and

contact your ITS administrator for information on Projector IP

Address, Subnet Mask, Default Gateway, and DNS Server.

1 Press to select Projector IP Address and press .

2 Press

to move the cursor and press

to

enter the digits.

 

3When you finish, press MENU to save and exit the menu.

4Repeat steps 1-3 to input addresses for Subnet Mask, Default Gateway, DNS server.

5Press to highlight Apply and press .

 

To control the projector remotely:

 

1 Enter the Projector IP address in the address bar of the

 

web browser on your computer.

 

2 The remote network operation page is displayed.You can

 

control the projector by using this page. For details, see

 

the notes following this table.

 

 

 

LAN Reset

Press

after choosing "Yes" to return all items on the Tools

(for P5403/

page to the default settings.

N243/PN-SX12)

 

 

 

 

LAN

The default value is "Off". Choose "On" to enable the

(for S5201M/

LAN connection.

T111B/PS-X11M)

 

 

29

LAN IP/Mask

Identify IP and Mask address.

(for S5201M/

 

 

T111B/PS-X11M)

 

 

 

 

 

LAN Reset

Reset LAN function.

(for S5201M/

 

 

T111B/PS-X11M)

 

 

 

 

 

About LAN Setting (for P5403/N243/PN-SX12)

Note 1 : An overview of the remote network operation page

 

 

 

 

 

 

See Note 2 and

 

 

 

 

 

 

 

 

 

 

 

 

Note 3.

 

 

 

 

 

 

 

To switch

 

 

 

 

These buttons

input signals,

 

 

 

 

function the

click your

 

 

 

 

same as those

desired

 

 

 

 

on the OSD

signal.

 

 

 

 

menus,

 

 

 

 

 

 

projector

 

 

 

 

 

 

control panel,

 

 

 

 

 

 

or remote

 

 

 

 

 

 

control.

 

 

 

 

Note 2 : An overview of the Tools page

You can enter the projector information.

You can adjust the LAN control settings.

You can set the user password/ administrator password to prevent unauthorized use of the remote network operation/ Tools page.

English

30

Note 3: The Info page shows the projector information and status.

English

About Interactive Pen Setting

Note 1: Preparations

1.Connect the projector and your computer with a USB cable and VGA cable.

2.Turn on your projector and make suer it is displaying the computer’s image.

3.Enable the pen by selecting "Enable" in the Setting > Interactive Pen Setting > Pen Function menu. The pen’s link light starts to blink.

4.Point the pen at the screen to point, click, and drag.

Note 2: Overview of the Interactive Pen

 

Tip

Left mouse button

Sensor

 

Right mouse button

Wheel button

Link light

Battery light

USB connector

Note 3: To use the quick menu "Quick Interactive Pen Function":

1.Simply click the wheel button to activate the quick menu.

2.Rotate the wheel button to select a desired function from among Off, Alt+F4, Enter, Home, Page Up, and Page Down.

3.To perform the function, click the wheel button again.

Note 4: Charging the battery

1.To charge the battery, open the flap on the back of the pen to expose the USB connector.

2.Take a USB cable, and connect the smaller end to the pen and the larger end to a computer. Make sure the computer is powered on.

3.The battery light stays on while the battery is charging. When charging is finished, the battery light is off. You can disconnect the USB cable or keep it connected.

31

Note 5: Other notes about using the pen

1.Avoid standing too far from the screen. The closer you are to the screen, the better performance the pen has.

2.Hold the pen the way you hold a remote control or a pen.

3.A full battery charge takes 6-8 hours and will allow 20-40 hours non-stop use. The battery is only rechargeable, and is not user serviceable or user replaceable.

4.Avoid shadows! The pen cannot work if its tip is in a shadow or it is pointing at a shadow.

Management

English

ECO Mode

Choose "On" to dim the projector lamp, which will also

lower the power consumption, reduce noise, and extend

 

the lamp life. Choose "Off" to return to the normal mode.

 

 

 

Choose "On" to turn on the High Altitude mode. When

High Altitude

this function is turned on, the projector fans operate at full

speed continuously to cool down the projector’s

 

 

temperature.

 

 

Auto Shutdown

The projector will automatically shut down while there is

(Minutes)

no signal input detected after the setting time.

Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).

Choose this function to show or hide warning message Lamp Reminding when the changing lamp message is displayed. The

message will show up 30 hours before end of life.

Lamp Hour Reset

Press

after choosing "Yes" to turn the lamp hour

 

counter to 0 hours.

 

 

Auto Screen

The default value is "On". The up/down move of your

electronic screen relates to power on/off of the projector.

 

English

32

Audio

(S5201M/T111B/PS-X11M)

Volume

Press

to decrease the projector speaker volume.

Press

to increase the projector speaker volume.

 

 

 

 

 

Microphone

Press

to decrease the microphone volume.

Volume

 

 

 

(for S5201M/T111B/

Press

to increase the microphone volume.

PS-X11M)

 

 

 

 

 

Mute

Choose "On" to turn mute on.

Choose "Off" to turn mute off.

 

 

 

 

Power On/Off

Select this function to adjust the notification

Volume

 

volume when turning the projector on/off.

 

 

 

Alarm Volume

Select this function to adjust the volume of any

(for S5201M/T111B/

 

warning notifications.

PS-X11M)

 

 

 

 

 

 

 

Timer

33

English

Timer Location

Sets the location of the timer on the screen.

 

 

 

Timer Start (or

Press

to start or stop the timer.

Stop)

 

 

 

 

 

Timer Period

Press

to adjust the timer period.

(Minutes)

 

 

 

 

Timer Volume

Select this function to adjust the notification volume

when the timer function is enabled and time is up.

 

 

 

 

Timer Display

Press

to choose a timer display mode.

 

 

 

Language

 

Sets a language for the OSD menus. Use

to

Language

select your preferred language.

 

Press to confirm the selection.

English

34

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center.

Image Problems and Solutions

#

Problem

 

 

Solution

 

 

 

 

1

No image appears

Make sure all the cables are correctly connected as

 

onscreen

 

described in the "Getting Started" section.

 

 

Ensure none of the connector pins are bent or

 

 

 

broken.

 

 

Check if the projection lamp has been securely

 

 

 

installed. Please refer to the "Replacing the Lamp"

 

 

 

section.

 

 

Make sure you have removed the lens cap and the

 

 

 

projector is switched on.

 

 

 

 

2

Partial, scrolling

Press "RESYNC" on the control panel or remote

 

or incorrectly

 

control.

 

displayed image

For an incorrectly displayed image:

 

(For PC (Windows

 

95/98/2000/XP))

 

Open "My Computer > Control Panel," and

 

 

 

then double-click the "Display" icon.

 

 

 

Select the "Settings" tab.

 

 

 

Verify that your display resolution setting is

 

 

 

lower than or equal to UXGA (1600 x 1200).

 

 

 

Click the "Advanced Properties" button.

 

 

If the problem still appears, change the monitor display

 

 

you are using and follow the steps below:

 

 

 

Verify that the resolution setting is lower than

 

 

 

or equal to UXGA (1600 x 1200).

 

 

 

Click the "Change" button under the

 

 

 

"Monitor" tab.

 

 

 

Click "Show all devices > Standard monitor

 

 

 

 

types" under the SP box, and choose the

 

 

 

 

resolution mode you need under the "Models"

 

 

 

box.

 

 

 

Verify that the resolution setting of the

 

 

 

 

monitor display is lower than or equal to UXGA

 

 

 

 

(1600 x 1200).

 

 

 

 

 

 

 

 

 

35

 

 

 

 

 

 

 

 

 

 

 

 

English

3

Partial, scrolling

Press "RESYNC" on the control panel or remote

 

 

or incorrectly

 

control.

 

 

displayed image

For an incorrectly displayed image:

 

 

 

 

 

 

(For notebooks)

 

 

 

 

 

Follow the steps for item 2 (above) to adjust

 

 

 

 

 

the resolution of your computer.

 

 

 

 

 

Press the toggle output settings. Example:

 

 

 

 

 

 

[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],

 

 

 

 

 

 

Gateway [Fn]+[F4], IBM [Fn]+[F7], HP

 

 

 

 

 

 

[Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]

 

 

 

 

If you experience difficulty changing resolutions or

 

 

 

 

 

your monitor freezes, restart all equipment

 

 

 

 

 

including the projector.

 

 

 

 

 

 

 

 

4

The screen of the

If you are using a Microsoft® Windows® based

 

 

 

notebook

 

notebook: Some notebook PCs may deactivate their

 

 

 

computer is not

 

 

 

 

 

own screens when a second display device is in use.

 

 

 

displaying your

 

 

 

 

 

Each has a different way to be reactivated. Refer to

 

 

 

presentation

 

 

 

 

 

 

your computer's manual for detailed information.

 

 

 

 

If you are using an Apple® Mac® OS based

 

 

 

 

 

notebook: In System Preferences, open Display and

 

 

 

 

 

select Video Mirroring "On."

 

 

 

 

 

 

 

 

5

Image is unstable

Use "Tracking" to correct it. Refer to the "Image"

 

 

 

or flickering

 

section for more information.

 

 

 

 

Change the display color setting on your computer.

 

 

 

 

 

 

 

 

6

Image has vertical

Use "Frequency" to make an adjustment. Refer to

 

 

 

flickering bar

 

the "Image" section for more information.

 

 

 

 

Check and reconfigure the display mode of your

 

 

 

 

 

graphics card to make it compatible with the

 

 

 

 

 

projector.

 

 

 

 

 

 

 

 

7

Image is out of

Make sure the lens cap is removed.

 

 

 

focus

Adjusts the focus ring on the projector lens.

 

 

 

 

 

 

 

 

Make sure the projection screen is within the

 

 

 

 

 

required distance of 3.9 to 30.2 feet (1.2 to 9.2

 

 

 

 

 

meters) from the P5403/N243/PN-SX12 projector, or

 

 

 

 

 

1.6 to 12.2 feet (0.5 to 3.7 meters) from the S5201M/

 

 

 

 

 

T111B/PS-X11M projector. Refer to the "How to Get

 

 

 

 

 

a Preferred Image Size by Adjusting Distance and

 

 

 

 

 

Zoom" section for more information.

 

 

 

 

 

 

 

8

Image is stretched

When you play a DVD encoded in anamorphic or 16:9

 

 

 

when displaying a

aspect ratio you may need to adjust the following

 

 

 

"widescreen"

settings:

 

 

 

 

DVD title

If you play a 4:3 format DVD title, please change the

 

 

 

 

 

format to 4:3 with the projector OSD.

 

 

 

 

If the image is still stretched, you will also need to

 

 

 

 

 

adjust the aspect ratio. Set up the display format to

 

 

 

 

 

16:9 (wide) aspect ratio on your DVD player.

 

 

 

 

 

 

 

 

 

36

English

 

9

Image is too small

 

Adjust the zoom lever on the top of the projector.

 

 

or too large

 

Move the projector closer to or further from the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

screen.

 

 

 

 

 

 

Press "MENU" on the control panel or remote

 

 

 

 

 

 

control. Go to "Image > Aspect Ratio" and try

 

 

 

 

 

 

different settings.

 

 

 

 

 

 

 

 

 

 

10

Image has slanted

 

If possible, reposition the projector so that it is

 

 

 

sides

 

 

centered on the screen and below the bottom of the

 

 

 

 

 

 

screen.

 

 

 

 

 

 

Press the Keystone correction keys on the control

 

 

 

 

 

 

panel or remote control until the image becomes

 

 

 

 

 

 

square.

 

 

 

 

 

 

Press "MENU" on the control panel or remote

 

 

 

 

 

 

control to open the OSD menu. Go to "Image > Auto

 

 

 

 

 

 

Keystone" or "Image > Manual Keystone" to make

 

 

 

 

 

 

adjustments.

 

 

 

 

 

 

 

 

 

 

11

Image is reversed

 

Select "Image > Projection" on the OSD and adjust

 

 

 

 

 

 

the projection direction.

 

 

 

 

 

 

 

 

 

Problems with the Projector

 

 

 

 

 

 

 

 

 

 

#

Condition

 

 

 

Solution

 

 

 

 

 

 

 

 

1

The projector stops responding

 

If possible, turn off the projector, then

 

 

 

to all controls

 

 

 

unplug the power cord and wait at least 30

 

 

 

 

 

 

 

 

seconds before reconnecting power.

 

 

 

 

 

 

 

 

 

2

Lamp burns out or makes a

 

 

When the lamp reaches the end of its useful

 

 

 

popping sound

 

 

 

life, it will burn out and may make a loud

 

 

 

 

 

 

 

 

popping sound. If this happens, the projector

 

 

 

 

 

 

 

 

will not turn on until the lamp module has

 

 

 

 

 

 

 

 

been replaced. To replace the lamp, follow

 

 

 

 

 

 

 

 

the procedures in the "Replacing the Lamp"

 

 

 

 

 

 

 

 

section.

 

 

 

 

 

 

 

 

 

37

OSD Messages

#

Condition

 

Message Reminder

 

 

 

 

 

1

Message

Fan Fail - the system fan is not working.

 

 

 

 

 

 

 

Fan Fail.

 

 

 

 

Lamp will automatically turn off soon.

 

 

 

 

 

 

 

 

 

Projector Overheated - the projector has exceeded its

 

 

 

recommended operating temperature and must be allowed to

 

 

 

cool down before it is used. Please also check the dust filters if

 

 

 

they are installed. If the dust filter is clogged with dust, please

 

 

 

clean it.

 

 

 

 

 

 

 

Projector Overheated.

 

 

 

 

Lamp will automatically turn off soon.

 

 

 

 

 

 

 

 

 

Replace the lamp - the lamp is about to reach its maximum

 

 

 

lifetime. Prepare to replace it soon.

 

 

 

 

 

 

 

Lamp is approaching the end of its useful life in full power operation.

 

 

 

 

Replacement suggested!

 

 

 

 

 

 

 

 

 

 

 

English

English

38

LED & Alarm Definition Listing

LED Messages

Message

Power LED

Lamp LED

Temp LED

 

 

 

 

 

 

Red

Blue

Red

Red

 

 

 

 

 

Standby

V

--

--

--

(Power cord plugged in)

 

 

 

 

 

 

 

 

 

Power on

--

V

--

--

 

 

 

 

 

Lamp retry

--

Quick

--

--

 

 

flashing

 

 

 

 

 

 

 

Turning off (Cooling

Quick

--

--

--

state)

flashing

 

 

 

 

 

 

 

 

Turning off (Cooling

V

--

--

--

completed)

 

 

 

 

 

 

 

 

 

Error (Thermal failure)

--

V

--

V

 

 

 

 

 

Error (Fan lock failure)

--

V

--

Quick

 

 

 

 

flashing

 

 

 

 

 

Error (Lamp breakdown)

--

V

V

--

 

 

 

 

 

Error (Color wheel

--

V

Quick

--

failure)

 

 

flashing

 

 

 

 

 

 

39

Replacing the Lamp

Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.

The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.

Warning: Lamp compartment is hot! Allow it to cool down before changing lamp!

1 12

11

1

12

3

9

 

4

10

5

 

 

 

8

 

 

6

7

To remove the lamp:

1 Turn the projector off by pressing (POWER).

2Allow the projector at least 30 mins to cool down.

3Disconnect the power cord.

4Use a screwdriver to remove the screws from the cover. (Illustration #1)

5Push up and remove the cover.

6Remove and dispose of the lamp protection film (Illustration #2).

7Remove the screw that secures the lamp module (Illustration #3).

8Pull out the lamp connector from a slot in the lamp compartment. Disconnect it from the projector (Illustration #4).

9Lift the handle so that it stands up (Illustration #5). Pull out the lamp module by force (Illustration #6).

To replace the lamp module, use a new lamp and follow illustrations # 7 - #112 .

Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

English

English

40

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please refer to the steps below:

1Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.

 

20

13

 

mm

 

mm

 

 

 

49

 

 

.

 

 

mm9

8.4 mm

 

130

 

 

mm

Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.

2 Secure the ceiling rod using the appropriate type of cylinder screws.

 

 

Ceiling Mount

 

 

Base

Short Rod

 

- Attach to

 

ceiling

 

 

Long Rod

 

 

Extension Rod

 

 

Large Cylinder Cap

 

Screw Type A

Allen Key

 

- For tighten/loosen

 

50 mm length / 8 mm diameter -

 

 

 

 

Tightening Screw

Medium Rod

41

3Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket.

Screw Type B

Sliding Extension

Screw Type C

 

Large Washer

Projector Bracket Supports projector and allows for adjustments

Smaller Washer

Spacer

- For heat dissipation

Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary.

4 Attach the ceiling bracket to the ceiling rod.

Screw Type A 50 mm length - /8 mm diameter

Tightening Screw

Large Cylinder Cap

Allen Key

- For tighten/loosen

English

English

42

5 Adjust the angle and positioning as necessary.

Tightening Screw

Allen Key

30

Allen Key

Tightening Screw

Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack.

Models

Screw Type B

 

 

 

 

Washer Type

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Diameter (mm)

 

 

Length (mm)

 

 

Large

Small

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P5403/N243/PN-SX12/

3

25

 

 

 

 

 

 

 

 

 

 

 

 

V

V

S5201M/T111B/PS-X11M

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

149.5 mm

Screw M3

Depth 9.5 mm

242.04 mm

43

Specifications

The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.

Projection system

DLP

 

Resolution

P5403/N243/PN-SX12:

 

Native: SXGA+ (1400 x 1050)

 

Maximum: 1920 x 1080 EIA/RB

 

S5201M/T111B/PS-X11M:

 

Native: XGA (1024 x 768)

 

Maximum: 1920 x 1080 EIA/RB

 

 

Computer compatibility

IBM PC and compatibles, Apple Macintosh, iMac and VESA

 

standards: WXGA+ (1440 x 900), WXGA (1280 x 800, 1280 x

 

768), SXGA (1152 x 864, 1280 x 1024), SXGA+ (1400 x 1050),

 

XGA (1024 x 768), SVGA (800 x 600), VGA (640 x 480), UXGA

 

(1600 x 1200), 1920 x 1080 EIA/RB

 

 

Video compatibility

NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/K/K1/L),

 

HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i,

 

576i)

 

 

 

Aspect ratio

4:3 (native), 16:9

 

 

Displayable colors

1.07 billion colors

 

 

 

Projection lens

P5403/N243/PN-SX12:

 

F = 2.59 - 2.87, f = 16.88 mm - 21.88 mm,

 

1:1.3 Manual Zoom and Manual Focus

 

S5201M/T111B/PS-X11M:

 

F = 2.6, f = 6.90 mm, Manual Focus

 

 

 

Projection screen size

P5403/N243/PN-SX12: 30" (76 cm) - 300" (762 cm)

(diagonal)

S5201M/T111B/PS-X11M: 40" (102 cm) - 300" (762 cm)

 

 

 

Projection distance

P5403/N243/PN-SX12: 3.9' (1.2 m) - 30.2' (9.2 m)

 

S5201M/T111B/PS-X11M: 1.6' (0.5 m) - 12.2' (3.7 m)

 

 

 

Throw ratio

P5403/N243/PN-SX12: 65" @ 2 m (1.51 - 1.97 : 1)

 

S5201M/T111B/PS-X11M: 161" @ 2 m (0.61 : 1)

 

 

Horizontal scan rate

31 - 100 kHz

 

 

Vertical refresh scan rate

48 - 120 Hz

 

 

 

Lamp type

P5403/N243/PN-SX12: Philips 300 W user-replaceable

 

 

UHP

 

S5201M/T111B/PS-X11M: Osram 230 W user-replaceable

 

 

VIP

 

 

Keystone correction

+/-40 Degrees (Vertical), Manual

 

 

 

Digital zoom

2 X

 

 

 

Audio

5 W x 2

 

 

 

Weight

P5403/N243/PN-SX12: Approximate 3.25 kg (7.12 lbs.)

 

S5201M/T111B/PS-X11M: Approximate 3.5 kg (7.72 lbs.)

 

 

 

English

English

44

Dimensions (W x D x H)

P5403/N243/PN-SX12: 290 x 255 x 125 mm (11.4" x 10.0"

 

 

x 4.9")

 

S5201M/T111B/PS-X11M: 290 x 254 x 98.5 mm (11.4" x

 

 

10.0" x 3.9")

 

 

Power supply

Universal AC input 100 - 240 V, input frequency 50/60 Hz

 

 

 

Power consumption

P5403/N243/PN-SX12: 447 W

 

S5201M/T111B/PS-X11M: 352 W

 

 

Operating temperature

0ºC to 35ºC / 32ºF to 95ºF

 

 

 

I/O connectors

Power socket x 1

 

RS232 x 1

 

VGA input x 2

 

Composite video x 1

 

S-Video x 1

 

3.5 mm audio jack output x 1

 

VGA output x 1

 

HDMI x 1

 

RJ45 LAN input x 1

 

USB (Type B) x 1

 

12 V DC output

 

Below items are for S5201M/T111B/PS-X11M only.

 

3.5 mm audio jack input x 2

 

USB (Type A) x 2

 

HDMI x 2

 

Microphone input x 1

 

Below items are for P5403/N243/PN-SX12 only.

 

Audio input (R/L) x 1

 

 

 

Standard package contents

AC power cord x 1

 

VGA cable x 1

 

Remote control x 1

 

Battery x 2 (for the remote control)

 

User's guide (CD-ROM) x 1

 

Quick start guide x 1

 

Security card x 1

 

Composite video cable x 1

 

Carrying case x 1

 

Below items are for S5201M/T111B/PS-X11M only.

 

USB cable x 1

 

Interactive Pen x 1

 

 

 

Accessory (optional)

Dust filter x 1

*Design and specifications are subject to change without notice.

45

Compatibility Modes

1 VGA Analog - PC Signal

Mode

Resolution

V.Frequency [Hz]

H.Frequency [KHz]

 

 

 

 

VGA_60

640 x 480

59.940

31.469

 

 

 

 

VGA_72

 

72.809

37.861

 

 

 

 

VGA_75

 

75.000

37.500

 

 

 

 

VGA_85

 

85.008

43.269

 

 

 

 

VGA_70

720 x 400

70.087

31.469

 

 

 

 

VGA_85

 

85.039

37.927

 

 

 

 

SVGA_56

800 x 600

56.250

35.156

 

 

 

 

SVGA_60

 

60.317

37.879

 

 

 

 

SVGA_72

 

72.188

48.077

 

 

 

 

SVGA_75

 

75.000

46.875

 

 

 

 

SVGA_85

 

85.061

53.674

 

 

 

 

XGA_60

1024 x 768

60.004

48.363

 

 

 

 

XGA_70

 

70.069

56.476

 

 

 

 

XGA_75

 

75.029

60.023

 

 

 

 

XGA_85

 

84.997

68.677

 

 

 

 

SXGA_70

1152 x 864

70.012

63.851

 

 

 

 

SXGA_75

 

75.000

67.500

 

 

 

 

SXGA_85

 

84.990

77.094

 

 

 

 

SXGA_60

1280 x 1024

60.020

63.981

 

 

 

 

SXGA_72

 

72.000

76.970

 

 

 

 

SXGA_75

 

75.025

79.976

 

 

 

 

SXGA_85

 

85.024

91.146

 

 

 

 

QuadVGA_60

1280 x 960

60.000

60.000

 

 

 

 

QuadVGA_75

 

75.000

75.000

 

 

 

 

SXGA+_60

1400 x 1050

59.978

65.317

 

 

 

 

UXGA_60

1600 x 1200

60.000

75.000

 

 

 

 

Mac G4

640 x 480@60Hz

59.940

31.469

 

 

 

 

MAC13

640 x 480@67Hz

66.667

35.000

 

 

 

 

Mac G4

800 x 600@60Hz

60.317

37.879

 

 

 

 

MAC16

832 x 624@75Hz

74.546

49.722

 

 

 

 

Mac G4

1024 x 768@60Hz

60.004

48.363

 

 

 

 

English

46

English

 

MAC19

1024 x 768@75Hz

75.020

60.241

 

 

 

 

 

 

WXGA_60

1280 x 768

59.870

47.776

 

 

MAC21

1152 x 870@75Hz

75.061

68.681

 

 

 

 

 

 

 

 

WXGA_75

 

74.893

60.289

 

 

 

 

 

 

 

 

WXGA_85

 

84.837

68.633

 

 

 

 

 

 

 

 

WXGA_60

1280 x 720

60.000

45.000

 

 

 

 

 

 

 

 

WXGA_60

1280 x 800

59.810

49.702

 

 

 

 

 

 

 

 

WXGA+_60

1440 x 900

59.887

55.935

 

 

 

 

 

 

 

 

1680 x 1050_60

1680 x 1050

59.954

65.290

 

 

 

 

 

 

 

 

1920 x 1080_RB

1920 x1080

60.000

66.587

 

 

 

 

 

 

 

 

1920 x 1080_EIA

1920 x1080

60.000

67.500

 

 

 

 

 

 

 

 

acer_16:9

1366 x 768

59.790

47.712

 

 

 

 

 

 

 

 

acer_timing

1024 x 600

60.000

37.500

 

 

 

 

 

 

 

 

VGA_120

640 x 480

119.518

61.910

 

 

 

 

 

 

 

 

SVGA_120

800 x 600

119.854

77.425

 

 

 

 

 

 

 

 

XGA_120

1024 x 768

119.804

98.958

 

 

 

 

 

 

 

 

2 DVI-D & HDMI (HDCP) Timing

 

 

 

 

 

 

 

 

 

 

Mode

Resolution

V.Frequency [Hz]

H.Frequency [KHz]

 

 

 

 

 

 

 

 

VGA_60

640 x 480

59.940

31.469

 

 

 

 

 

 

 

 

VGA_72

 

72.809

37.861

 

 

 

 

 

 

 

 

VGA_75

 

75.000

37.500

 

 

 

 

 

 

 

 

VGA_85

 

85.008

43.269

 

 

 

 

 

 

 

 

VGA_70

720 x 400

70.087

31.469

 

 

 

 

 

 

 

 

VGA_85

 

85.039

37.927

 

 

 

 

 

 

 

 

SVGA_56

800 x 600

56.250

35.156

 

 

 

 

 

 

 

 

SVGA_60

 

60.317

37.879

 

 

 

 

 

 

 

 

SVGA_72

 

72.188

48.077

 

 

 

 

 

 

 

 

SVGA_75

 

75.000

46.875

 

 

 

 

 

 

 

 

SVGA_85

 

85.061

53.674

 

 

 

 

 

 

 

 

XGA_60

1024 x 768

60.004

48.363

 

 

 

 

 

 

 

 

XGA_70

 

70.069

56.476

 

 

 

 

 

 

 

 

XGA_75

 

75.029

60.023

 

 

 

 

 

 

 

 

XGA_85

 

84.997

68.677

 

 

 

 

 

 

 

 

SXGA_70

1152 x 864

70.012

63.851

 

 

 

 

 

 

 

 

SXGA_75

 

75.000

67.500

 

 

 

 

 

 

<

 

 

 

 

47

 

 

 

 

 

 

 

 

 

SXGA_85

1152 x 864

84.990

77.094

 

 

English

 

 

 

 

 

 

SXGA_72

 

72.000

76.970

 

 

SXGA_60

1280 x 1024

60.020

63.981

 

 

 

 

 

 

 

 

 

 

SXGA_75

 

75.025

79.976

 

 

 

 

 

 

 

 

 

 

SXGA_85

 

85.024

91.146

 

 

 

 

 

 

 

 

 

 

QuadVGA_60

1280 x 960

60.000

60.000

 

 

 

 

 

 

 

 

 

 

QuadVGA_75

 

75.000

75.000

 

 

 

 

 

 

 

 

 

 

SXGA+_60

1400 x 1050

59.978

65.317

 

 

 

 

 

 

 

 

 

 

UXGA_60

1600 x 1200

60.000

75.000

 

 

 

 

 

 

 

 

 

 

Mac G4

640 x 480@60Hz

59.940

31.469

 

 

 

 

 

 

 

 

 

 

MAC13

640 x 480@67Hz

66.667

35.000

 

 

 

 

 

 

 

 

 

 

Mac G4

800 x 600@60Hz

60.317

37.879

 

 

 

 

 

 

 

 

 

 

MAC16

832 x 624@75Hz

74.546

49.722

 

 

 

 

 

 

 

 

 

 

Mac G4

1024 x 768@60Hz

60.004

48.363

 

 

 

 

 

 

 

 

 

 

MAC19

1024 x 768@75Hz

75.020

60.241

 

 

 

 

 

 

 

 

 

 

MAC21

1152 x 870@75Hz

75.061

68.681

 

 

 

 

 

 

 

 

 

 

WXGA_60

1280 x 768

59.870

47.776

 

 

 

 

 

 

 

 

 

 

WXGA_75

 

74.893

60.289

 

 

 

 

 

 

 

 

 

 

WXGA_85

 

84.837

68.633

 

 

 

 

 

 

 

 

 

 

WXGA_60

1280 x 720

60.000

45.000

 

 

 

 

 

 

 

 

 

 

WXGA_60

1280 x 800

59.810

49.702