ABB A9 – A750 Catalog Page

Across the line starters

Open & enclosed A9 – A750

Description

A9 – A750

• Maximum UL/CSA horsepower ratings

• UL508A Panel Program, #E105450

• NEMA sizes 00 – 7 available

• Compact space-saving design

• Standard auxiliary contact conﬁ gurations: A9 – A40 1 NO or 1 NC A50 – A750 1 NO & 1 NC

• Additional auxiliary contact blocks are available

• DC ratings & DC control operation available

• Fast, snap-on DIN rail mounting (A9 - A110)

• Double break contact design

• Snap-on front and side mounted accessories include mechanical latch, pneumatic timer and 1 & 4 pole auxiliary contact blocks (A9 – A110)

• Easy coil change

• Captive terminal screws

• NEMA, UL, CSA, and most other international standards

• cUL marked

• Operates over an extended voltage range of 85% to 110% of rated control voltage

• Screwdriver guide holes

Starters

Enclosure types

• NEMA 1 (Indoor metal)

• NEMA 3R (Outdoor metal)

• NEMA 12 (Metal dusttight)

• NEMA 4X (Stainless steel)

• NEMA 4 (Water tight)

• NEMA 1, 3R, 4, 4X, & 12 (Plastic)

• IP 65 plastic A9 – A16 starters

• NEMA 7 & 9 Class I, Group C, D, Div 1 & 2 Class II, Groups E, F, & G, D iv 1 & 2 Class III, 4X

Overload relay protection

Starters, sizes A9 – A185, have Class 10 adjustable thermal bimetallic overload relay protection as standard.

Sizes A210 – A750, have selectable Class 10, 20, 30 adjustable electronic overload relay protection as standard.

Electronic overload relay protection is available for other starter sizes.

A110 SR 1 - 84 C A

Starter size Starter type

S - Non-reversing SR - Reversing SS - Single phase, non-reversing ST - Multi-speed, 2 speed 1 winding, 2 speed 2 winding N - NEMA

Enclosure

1 - UL Type 1 7 - UL Type 7 & 9 2 - UL Type 12 Class I, Group C, D, Div 1 & 2 3 - UL Type 3R Class II, Groups E, F & G, Div 1 & 2 4 - UL Type 4 Class III X - UL Type 4X stainless steel 74 - Hazardous Type 4 P - Plastic

Coil voltage/CCT

See Coil Voltage Selection charts on page 3.12

Overload range

See Overload Relay Selection chart, see page 3.6.

Low Voltage Products & Systems 3.11

ABB Inc. • 888-385-1221 • www.abb-control.com 1SXU 000 023 C0201

Accessories

See Factory modiﬁ cations, page 3.3

Starter selection by motor horsepower & voltage

Starters

Motor horsepower Complete starter Starter components 3-phase, 1800 RPM 1 Contactors Overload relays Catalog List Catalog List Catalog List

200V 230V 460V 575V

— — — 1/4 A9S-84C A9-30-10-84 TA25DU0.4 (0.25 – .4) — — 1/4,1/3 1/3 A9S-84D A9-30-10-84 TA25DU0.63 (0.4 – .63) — — — 1/2 A9S-84E A9-30-10-84 TA25DU1.0 (0.63 – 1.0) — — 1/2 3/4 A9S-84F A9-30-10-84 TA25DU1.4 (1.0 – 1.4) — — 3/4 — A9S-84G A9-30-10-84 TA25DU1.8 (1.3 – 1.8) — 1/2 1 1.5 A9S-84H 1/2 — 1.5 2 A9S-84J A9-30-10-84 TA25DU3.1 (2.2 – 3.1) 3/4 3/4 2 — A9S-84K A9-30-10-84 TA25DU4.0 (2.8 – 4.0) — 1 — 3 A9S-84L A9-30-10-84 TA25DU5.0 (3.5 – 5.0) 1 1.5 3 5 A9S-84M A9-30-10-84 TA25DU6.5 (4.5 – 6.5) 2 2 5 — A9S-84N A9-30-10-84 TA25DU8.5 (6.0 – 8.5) — — — 7.5 A9S-84P A9-30-10-84 TA25DU11 (7.5 – 11)

3 3 7.5 10 A12S-84Q 171 A12-30-10-84 84 TA25DU14 (10 – 14) 5 5 10 15 A16S-84R 200 A16-30-10-84 102 TA25DU19 (13 – 19) — 7.5 15 20 A26S-84S

7.5 10 20 25 A26S-84T A26-30-10-84 TA25DU32 (24 – 32) 10 10 — — A30S-84B 365

— — 25 30 A30S-84C TA42DU42 (29 – 42) 78 10 15 30 40 A40S-84C 423 A40-30-10-84 297 TA42DU42 (29 – 42) 15 — 40 50 A50S-84D

— 20 — — A50S-84E A50-30-11-84 TA75DU63 (45 – 63) 20 — — — A63S-84F

— — 50 60 A63S-84F A63-30-11-84 TA75DU80 (60 – 80) 25 30 60 75 A75S-84F 563 A75-30-11-84 413 30 — — — A95S-84A 735 A95-30-11-84 450 TA110DU90 (65 – 90) — 40 75 100 A110S-84B 765 A110-30-11-84 480 TA110DU110 (80 – 110) 40 — — — A145S-84C 1315

— 50 100 125 A145S-84D TA200DU150 (110 – 150) 225 50 60 125 150 A185S-84E 1730 A185-30-11-84 1290 TA200DU175 (130 – 175) 60 75 150 200 A210S-84E3 2135 A210-30-11-84 1635 75 100 200 250 A260S-84E3 2740 A260-30-11-84 1815 E320D4320 (105-320) 775 100 — 250 300 A300S-84E3 2890 A300-30-11-84 1875 125 125, 150 350 400 A400S-70E5 4125 150 200 400 500 A460S-70E5 5700 AF460-30-11-70 4425 200 250 500 600 A580S-70E8 8346 AF580-30-11-70 6900 250 300 600 700 A750S-70E8 8646 AF750-30-11-70 7200

Maximum UL/CSA ratings, three phase

number price number price number price

A9-30-10-84

$ 165

A26-30-10-84

294

A30-30-10-84 252

A50-30-11-84

458

A63-30-11-84

522

A145-30-11-84 825

AF400-30-11-70 3120

TA25DU2.4 (1.7 – 2.4)

$ 78

TA25DU25 (18 – 25)

183

TA42DU32 (22 – 32)

TA75DU52 (36 – 52)

330

372

TA200DU135 (100 – 135)

E500DU500 (170 – 500) 865

E800DU800 (270 – 800) 950

$ 63

102

165

CAUTION: The above ratings are based on average motor FLA. Actual FLA on the motor nameplate should be used for overload relay setting.

Coil voltage selection

All AC operated catalog numbers include a 120VAC coil. To select other coil voltages, substitute the code from the Coil Voltage Selection Chart for the two digits after the last dash in the catalog number.

Ex.: A 240V coil is required for an A75 starter: A75S-80F

D.C. operated starters

If DC operation is required, consult factory.

Factory modiﬁ cations

See page 3.3

1 For motors with RPM greater or less than 1800 RPM, check full load amp rating on motor nameplate to ensure proper overload protection. 2 For AF50 – AF 300 starters, consult factory.

3.12 Low Voltage Products & Systems

1SXU 000 023 C0201 ABB Inc. • 888-385-1221 • www.abb-control.com

Open Enclosed Discount schedule AA AAE – A9 - A110

AEA AEAE – A145 - AF1650

Coil voltage selection – A9 - A300 2

Cntr Volts Hz type 12 24 48 110 120 125 208 220 240 277 380 415 440 480 500 600 60 A 81 83 84 84 34 36 80 42 86 86 51 53 55 50 A 81 83 84 80 85 86 55

For other voltages, see page

Coil voltage selection – A400 - A750 2

CntrVolts

type 24 - 60 48 - 130 100 - 250 250 - 500

Hz 60 AF 68 69 70 71 50 AF 68 69 70 71 DC AF 68 69 70 71

Control transformer voltage selection chart

Volts Hz Type 208/120 230 – 240/120 460 – 480/120 575 – 600/120 50/60 A/AF 0 7 8 9 For other voltages, consult factory.

1.26.

Starter selection by motor horsepower & voltage

Starters

NEMA sizes & ratings, three phase

Motor horsepower Complete starter Starter components

NEMA Catalog List Catalog List Catalog List

200V 230V 460V 575V

size

— — — 1/4 A9N00S-84C A9N00-30-10-84 TA25DU0.4 (0.25 – .4) — — — 1/3 A9N00S-84D A9N00-30-10-84 TA25DU0.63 (0.4 – .63) — — 1/4 1/2 A9N00S-84E A9N00-30-10-84 TA25DU1.0 (0.63 – 1.0) — 1/4 1/3,1/2 — A9N00S-84F A9N00-30-10-84 TA25DU1.4 (1.0 – 1.4) — 1/3 3/4 3/4 A9N00S-84G A9N00-30-10-84 TA25DU1.6 (1.3 – 1.6) 00 1/3,1/4 1/2 1 1 A9N00S-84H $ 165 A9N00-30-10-84 $ 78 TA25DU2.4 (1.7 – 2.4) 1/2 — — 1.5, 2 A9N00S-84J A9N00-30-10-84 TA25DU3.1 (2.2 – 3.1) 3/4 3/4 1.5, 2 — A9N00S-84K A9N00-30-10-84 TA25DU4.0 (2.8 – 4.0) — 1 — — A9N00S-84L A9N00-30-10-84 TA25DU5.0 (3.5 – 5.0) 1 1.5 — — A9N00S-84M A9N00-30-10-84 TA25DU6.5 (4.5 – 6.5)

1.5 — — — A9N00S-84N A9N00-30-10-84 TA25DU8.5 (6.0 – 8.5) $ 63 — — — 3 A16N0S-84L A16N0-30-10-84 TA25DU5.0 (3.5 – 5.0)

0 — — 3 5 A16N0S-84M 2 2 5 — A16N0S-84N A16N0-30-10-84 TA25DU8.5 (6.0 – 8.5) 3 3 — — A16N0S-84P A16N0-30-10-84 TA25DU11 (7.5 – 11)

— — — 7.5 A26N1S-84P A26N1-30-10-84 TA25DU11 (7.5 – 11) 1 — — 7.5 10 A26N1S-84Q 5 5 10 — A26N1S-84R A26N1-30-10-84 TA25DU19 (13 – 19)

7.5 7.5 — — A26N1S-84S A26N1-30-10-84 TA25DU25 (18 – 25) — — — 15 A50N2S-84R 393 A50N2-30-11-84 330 TA25DU19 (13 – 19) 3 2 — — 15 20 A50N2S-84A A50N2-30-11-84 TA75DU25 (18 – 25)

— 10 20 25 A50N2S-84B 458 A50N2-30-11-84 330 TA75DU32 (22 – 32) 10 15 25 — A50N2S-84C A50N2-30-11-84 TA75DU42 (29 – 42)

— — — 30 A75N3S-84C A75N3-30-11-84 TA75DU42 (29 – 42) 3 15 — 30 40 A75N3S-84D 20 20 40 50 A75N3S-84E A75N3-30-11-84 TA75DU63 (45 – 63) 25 25,30 50 — A75N3S-84F A75N3-30-11-84 TA75DU80 (60 – 80)

— — 60 60, 75 A145N4S-84A 4 30 40 75 100 A145N4S-84B A145N4-30-11-84 TA200DU110 (80 – 110) 40 50 100 — A145N4S-84C A145N4-30-11-84 TA200DU135 (100 – 135)

5 50,60,75 60,75,100 125,150,200 200 A260N5S-8E3 — 100 200 — A260N5S-8E3

6 100, 125 125,150 250, 300 250, 300 150 200 400 400

7 — 250, 300 500, 600 500, 600 A750N7S-70E8 8646 AF750N7-3011-70 7200 E800DU800 (270 - 800) 950

3-phase, 1800 RPM 1

Contactors Overload relays

number price number price number price

A16N0-30-10-84

200

A26N1-30-10-84

294

A75N3-30-11-84

563

A145N4-30-11-84

1315

2740

A460N6S-70E5 5700 AF460N6-3011-70 4425 E500DU500 (170 - 500) 865

A260N5-30-11-84

TA25DU6.5 (4.5 – 6.5)

102

TA25DU14 (10 – 14)

183

TA75DU52 (36 – 52)

413

TA200DU90 (65 – 90)

825

1815 E320DU320 (105-320)

165

102

775

CAUTION: The above ratings are based on average motor FLA. Actual FLA on the motor nameplate should be used for overload relay setting.

Coil voltage selection

Ex.: A 240V coil is required for an A75 starter: A75NS-80F

D.C. operated starters

If DC operation is required, consult factory.

Factory modiﬁ cations

See page 3.3

1 For motors with RPM greater or less than 1800 RPM, check full load amp rating on motor nameplate to ensure proper overload protection. 2 For AF50 – AF 300 starters, consult factory. 3 Overload to be base mounted. 4 AF400 - AF750 only.

Low Voltage Products & Systems 3.13

ABB Inc. • 888-385-1221 • www.abb-control.com 1SXU 000 023 C0201

Open Enclosed Discount schedule AA AAE – A9 - A110

AEA AEAE – A145 - AF1650

Coil voltage selection – A9 - A300 2

Cntr Volts Hz type 12 24 48 110 120 125 208 220 240 277 380 415 440 480 500 600 60 A 81 83 84 84 34 36 80 42 86 86 51 53 55 50 A 81 83 84 80 85 86 55

For other voltages, see page

Coil voltage selection – A400 - A750 2

CntrVolts

type 24 - 60 48 - 130 100 - 250 250 - 500

Hz 60 AF 68 69 70 71 4 50 AF 68 69 70 71 4 DC AF 68 69 70 71 4

Control transformer voltage selection chart

Volts Hz Type 208/120 230 – 240/120 460 – 480/120 575 – 600/120 50/60 A/AF 0 7 8 9 For other voltages, consult factory.

1.26.

+ 6 hidden pages