• Air-cooled condensing units with
capacities from 55 to 140 tons
• Staged or VFD controlled variable
speed R-410A scroll compressors
• High efciency microchannel air-
cooled condenser coils
• Double wall rigid polyurethane
foam injected panel construction
• Service access doors with full
length stainless steel piano hinges
and zinc cast lockable handles
• VFD controlled variable speed
condenser fans
• Modulating hot gas reheat
humidity control
• Matching indoor and outdoor
air handling units available for a
complete split system solution
Series
Application Flexibility
Minimizes Installation Time and Reduces Cost
Quiet OperationVariable Capacity
Compressors
Easy to Install and ServiceCompact Construction
CN
Condensing Units
AAON CN Series condensing units oer a
cost eective, feature laden approach to
energy ecient cooling. The split system
condensing units reect the proven
reliability and engineering excellence
from the premier manufacturer of heating
and cooling products. AAON CN Series
condensing units boast the same world
class benets that customers have come
to expect from AAON packaged equipment:
serviceability, quiet operation, reliability,
premium eciency, rugged construction,
and a number of premier options
that provide the exibility to suit any
application.
Superior Features
• Staged or VFD controlled variable speed R-410A scroll compressors are
Series
available for load matching cooling and increased part load eciency.
• Compressors are factory installed on structural decks and rubber
isolation mounts for quiet and ecient operation.
• High eciency air-cooled microchannel condenser is designed to
maximize performance of the condensing unit.
• Two inch double wall polyurethane foam panel construction with
integrated thermal break provides R-13 or greater thermal resistance,
makes the cabinet more rigid and resistant to damage, and attenuates
radiated compressor sound.
• Access doors with full length stainless steel piano hinges and zinc
cast, lockable handles provide ample access and serviceability to the
isolated compressor and controls compartment.
• Designed specically for outdoor operation, CN Series condensing
units include UV and corrosion resistant exterior paint that exceeds a
2,500 hour salt-spray test.
• Run test report, color-coded wiring diagram, and Installation,
Operation, and Maintenance manual with startup form are included in
the controls compartment.
Microchannel condenser coils are
more ecient, lighter, and use less
refriger ant than traditional n and
tube condenser coils.
H
CN
Model
W
L
055
075
090
105
120
140
CabinetWidthHeightLength
A
B
C130
All dimensions are in inches.
142104
90065
152
CN
Condensing Units
Series
Premier Options
• VFD controlled variable speed condenser fans increase part load
eciency and oer complete capacity modulation when coupled with
VFD controlled variable speed compressors.
• Flooded condenser low ambient controls allow mechanical cooling
operation during periods of low ambient conditions down to 0°F.
• E-coated condenser coils are available to extend the life of the coils and
protect them in corrosive environments.
• Modulating hot gas reheat is available to provide energy ecient
dehumidication, even with low sensible heat loads, without the
temperature swings inherent in on/o reheat systems.
• Optional 5 year non-prorated compressor warranty.
Premium Construction
Variable Capacity Scroll
Compressors
CN Series condensing units are available with lead
VFD controlled variable speed scroll compressors
that can modulate compressor capacity. This allows
the system, when paired with a matching AAON
air handling unit, to maintain consistent supply air
temperatures at all operating conditions. During
part load operation, reducing compressor capacity
increases part load eciency and ultimately saves
valuable system operating costs. CN Series units are
also available with VFD controlled compressors on all
circuits to maximize energy savings.
Variable Speed Condenser
Fans
CN Series condensing units are available with VFD
controlled condenser fans that increase part load
eciency and save operating costs. The factory
controlled VFDs vary the fan speed for head pressure
control.
Compressor and Control Service Compartment
VFD controlled variable speed scroll compressors
provide load matching cooling and improve part
load efficiency.
Microchannel Condenser
CN Series condensing units are designed with
microchannel condenser coils that are more ecient,
lighter, and use less refrigerant than traditional n
and tube condenser coils. The microchannel tube
design increases unit eciency by enhancing heat
transfer, and the all aluminum construction of the
coil is up to 30 percent lighter than n and tube coils.
Dehumidification
CN Series condensing units are available with
modulating hot gas reheat humidity control. Factory
installed reheat valve s use only the minimum amount
of reheat to deliver a consistent supply air temperature
during dehumidication. Modulating hot gas reheat
provides energy ecient dehumidication when
paired with AAON air handling units containing high
capacity cooling coils.
Split System Matching
CN Series condensing units can be paired with AAON
RN Series, M3 Series, and M2 Series air handling
units. The AAON ECat selection software includes
refrigeration options, such as Modulating Hot Gas
Reheat or Flooded Condenser 0°F Low Ambient,
when matching a split system. Pairing a CN Series
condensing unit with an AAON air handling unit
ensures ease of installation with split system piping
and control wiring.
AAON Environmentally Friendly HVAC Product Family
Custom & Cataloged
Air Handling Units
(800-200,000+ cfm)
Condensers & Condensing Units
(2-230 tons)
Heating and Cooling for...
Auditoriums
Chillers (Air-Cooled &
Evaporative-Cooled)
(4-540 tons)
Rooftop Units
(2-240 tons)
Outdoor Equipment Rooms
(Chillers, Boilers & Pumps)
Self-Contained Units
(3-70 tons)
Residential Systems
(2-5 tons)
Convenience Stores
Health Clubs
Healthcare Facilities
Homes
Lodgings
Manufacturing
Museums & Libraries
Natatoriums
Ofce Buildings
Restaurants
Retail Stores
Schools
Supermarkets
Geothermal & WSHP Units
(2-230 tons)
Air-Source Heat Pumps
(2-230 tons)
2425 S. Yukon Ave.
Heating and Cooling Coils
(Booster, Hydronic, & DX)
Tulsa, OK 74107-2728
www.AAON.com
Fluid Coolers
(50-450 tons)
It is the intent of AAON to provide accurate and current product information. However, in the interest of product improvement, AAON reserves the right to change