Aaon CF-002 User Manual

CONDENSERS AND CONDENSING UNITS

CF

Features:

• 2-70 ton air-cooled condensing
units and remote air-cooled
condensers

• Air-source heat pump

congurations for energy
efcient heating

• Staged, two-step, or 10-100%

variable capacity compressors
for load matching cooling

and heat pump heating with

improved part load efciency

• High efciency variable speed
ECM driven or VFD controlled

condenser fans

• Modulating hot gas reheat for
dehumidication with precise
temperature and humidity control

• Service access doors with full
length stainless steel piano
hinges and lockable handles

• Compressors and controls
are housed in a service
compartment

• 2,500 hour salt spray tested
exterior corrosion protection

• Matching AAON indoor and
outdoor air handling units

available for a complete split
system solution

Series

Application Flexibility

Minimizes Installation Time and Reduces Cost

High Efciency Design Modulating

Dehumidication

Variable Capacity

Scroll Compressors

Quiet Operation

CF

H

L

W

B

L

T

Condensing Units

AAON CF Series split system condensing units
reect the proven reliability and engineering
excellence from the premier manufacturer
of heating and cooling products. Factory
installed options minimize eld installation
time and cost. CF Series condensing units
boast the same benets that customers
have come to expect from other
AAON products: serviceability, quiet
operation, reliability, premium eciency,
world class construction, and a number
of premier options that provide the exibility
to suit any application.

Series

Superior Features

• Staged, two-step, or 10-100% variable capacity R-410A scroll
compressors are available for load matching cooling and heat pump
heating.

• Variable capacity compressors are available on the lead circuit or all
circuits to match the application requirements.

• Compressors and controls are housed in a service compartment. Access
doors with full length stainless steel piano hinges and lockable handles
provide superior access and serviceability for the isolated compressor and
controls compartment.

• Compressors are factory installed with rubber isolation mounts on
structural decks in an isolated service compartment for quiet operation.

• Designed specically for outdoor operation, CF Series condensing units
include corrosion resistant exterior paint that exceeds a 2,500 hour salt
spray test.

• Each refrigeration circuit includes automatic low pressure and manual
reset high pressure safety cut outs, and suction and liquid line Schrader
valves.

• CF Series condensing units include factory supplied and labeled split
system copper stub outs with shut o valves for easy installation without
the need to cut holes in the cabinet.

• Run test report, color-coded wiring diagram, and Installation, Operation,
and Maintenance manual with startup form are included in the controls
compartment.

Split system copper stub outs with shut-o valves

are easily accessible outside of the cabinet.

Premier Options

• Polymer e-coated condenser coils are available to extend the
life of the coils and protect them in corrosive environments.

• Modulating hot gas reheat is available to provide energy
ecient dehumidication, even with low sensible heat
loads, without the temperature swings common with on/o
reheat systems.

• Flooded condenser low ambient control allows cooling at
temperatures down to 0°F.

• ECM driven or VFD controlled condenser fans for head
pressure control and complete capacity modulation.

• High density foam compressor sound suppression blanket
reduces radiated compressor sound.

• 5 year non-prorated compressor warranty.

Horizontal Discharge