3M MP8730, MP8740 Quick Setup Instructions

3M MP8730/MP8740 Multimedia Projector Quick Setup Instructions

Cable Connections: Always turn power off when making any cable connections.

Laser Disc

OUT

OUT

REDWHT

OUT

VCR

REDWHTYEL

MP8730
MP8740

Audio Right

Audio Left

S-VHS

S-VIDEO VIDEO AUDIOLR

1

2

S-VIDEO VIDEO AUDIOLR

1

2

AUDIO

IN

1

2

RGB IN

K

AUDIO

OUT

RGB OUT

CONTROL

OUT

MONITOR

MAC

Laptop

PORT

INININ

MAC

or PC

RGB IN

RGB IN

REDWHTYEL

K

AUDIO

AUDIO

1

OUT

IN

2

RGB OUT

CONTROL

RGB IN

RGB OUT

CONTROL

MONITOR

PORT

PS/2 or

SERIAL

PORT

PC

IN IN IN

OUTOUTOUT

Audio L/R

Video

Technical Assistance & Product Information

1-800-328-1371

Internet: [e-mail]

Power

CRT

Display

8730-23A

© 3M 1999 78-6970-8033-7

3M MP8730/MP8740 Multimedia Projector Quick Setup Instructions

Project Packout

Multimedia Projector Remote Control Transmitter

Power Cord

110V – US

220V – UK, Europe

3-Conductor

Video/Audio Cable

Packout Items not Shown:

• PS/2 mouse cable .............. (1)

• ADB mouse cable ............. (1)

• Serial mouse cable ............ (1)

• Stereo mini-jack ................(1)

Remote Control Transmitter

STANDBY / ON button

Set main power switch to ON.
Press and hold STANDBY/ON button for
projector mode (lamp on) or standby
mode (lamp off).

FOCUS button

Press +/- to adjust image sharpness.

ZOOM button

Press +/- to adjust image size.
Note: If needed, move projector
closer/further from screen.

POSITION button

Press and light POSITION button.
Move DISK PAD to adjust horizontal/
vertical image position.

DISK PAD

Select mode, then move DISK PAD to
position image, navigate menus or control
mouse functions. To select the mode:

• Press and light POSITION button for
position mode.

• Press and light MENU ON button for
menu mode.

MENU ON button

Press and light MENU ON button to
display the Main Menu. Move DISK PAD
to select menu and/or adjust screen
values.

BLANK ON button

Press BLANK to display a blank
background with no image. Press again to
return the image to the screen.

INPUT buttons

RGB 1/2: Select computer video input
(RGB1 ➔ RGB2 ➔ RGB1).
VIDEO 1/2: Select video inputs
(VIDEO1 ➔ VIDEO2 ➔ VIDEO1).

VGA Cable

(15-15 pin M/M)

ZOOMFOCUS

POSITION ON

RESET

MENU ON MOUSE ON

BLANK TIMER

RGB1/2 VIDEO1/2

INPUT

MUTESTANDBY/ON

VOLUME

RIGHT

LASER

(batteries included)

Adapter

with dip switch

MUTE button

Press MUTE to switch the audio
sound ON or OFF

VOLUME button

Press +/- to adjust internal/external speaker

volume.

LASER POINTER

Press and hold down button to project laser

pointer.

CAUTION

To prevent injury to eyesight, do not point
laser beam at other persons or look directly
into laser beam.

LEFT MOUSE

button

Backside

of Remote

RESET / RIGHT MOUSE button

RESET: When a menu is being displayed,
press RESET to return menu value to factory
setting.

RIGHT MOUSE: When computer image is
being displayed, press for right mouse button
function.

MOUSE ON button

Press MOUSE ON button to activate mouse
mode. Move DISK PAD to control mouse
functions.

TIMER ON / OFF button

Press TIMER to display and start the timer as
set in OPT menu setting. Note: Timer will not
display on a blank screen. To remove TIMER
display press again.

Video Cable

(S-Video mini

DIN4-pin)

Projector Startup

FOCUS ZOOM

CLOSE

OPEN

Projector Startup Procedure

1. Make all cable connections and line hookups with the power off.

2. Turn the POWER SWITCH of the projector on. The ON indicator will light up orange.

3. Move the LENS SHUTTER CONTROL to the open position.

CLOSE

OPEN

4. Press the STANDBY/ON button . The ON indicator blinks (green) and then lights (green).

The ON indicator will blink green during warm-up and lamp ignition.

5. Adjust the screen size using the ZOOM button .

6. Adjust the focus using the FOCUS button .

ZOOM

FOCUS

7. Turn on all connected equipment. The method of connecting various equipment, see section 2.3.

8. Press the INPUT button on the projector or the INPUT SELECT (VIDEO or RGB) button

on the remote to select the source of the signal to be projected on the screen. The selected signal

input is displayed at the bottom right of the screen. The display will show the last selected input source
before power was turned off.

Projector Shutdown Procedure

1

. Hold the STANDBY/ON button for 3-5 seconds. The ON indicator blinks orange and the lamp

turns off. After approximately 1 minute, the fan stops and the indicator stays orange.

2. Turn the MAIN POWER SWITCH of the projector off.

Caution

Do not turn off the POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON
button is pressed, the fan rotates for about 1 minute to cool the projector.

3. Close the LENS SHUTTER . Push up on the lens cover switch to close.

4. Disconnect cables.

CLOSE

OPEN