Samsung BN68-01518H-00 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

	Country	Customer Care Centre	Web Site
	AUSTRIA	0800-SAMSUNG (726-7864)	www.samsung.com/at
	BELGIUM	0032 (0)2 201 24 18	www.samsung.com/be
		844 000 844	www.samsung.com/cz
	CZECH REPUBLIC	Distributor pro Českou republiku:
		Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
	DENMARK	70 70 19 70	www.samsung.com/dk
	EIRE	0818 717 100	www.samsung.com/ie
	FINLAND	030-6227 515	www.samsung.com/fi
	FRANCE	3260 SAMSUNG (€ 0,15/Min)	www.samsung.com
		08 25 08 65 65 (€ 0,15/Min)
	GERMANY	01805 - SAMSUNG (726-7864) (€ 0,14/Min)	www.samsung.com
	HUNGARY	06-80-SAMSUNG (726-7864)	www.samsung.com
	ITALIA	800-SAMSUNG (726-7864)	www.samsung.com
	LUXEMBURG	0035 (0)2 261 03 710	www.samsung.com/be
	NETHERLANDS	0900-SAMSUNG (726-7864) (€ 0,10/Min)	www.samsung.com/nl
	NORWAY	815-56 480	www.samsung.com/no
	POLAND	0 801 801 881	www.samsung.com/pl
		022-607-93-33
	PORTUGAL	80820-SAMSUNG (726-7864)	www.samsung.com/pt
	SLOVAKIA	0800-SAMSUNG (726-7864)	www.samsung.com/sk
	SPAIN	902 10 11 30	www.samsung.com
	SWEDEN	0771-400 200	www.samsung.com/se
	SWITZERLAND	0800-SAMSUNG (726-7864)	www.samsung.com/ch
	U.K	0845 SAMSUNG (7267864)	www.samsung.com
	TURKEY	444 77 11	www.samsung.com
	ESTONIA	800-7267	www.samsung.ee
	LATVIA	800-7267	www.samsung.com/lv
	LITHUANIA	8-800-77777	www.samsung.lt
	KAZAHSTAN	8-10-800-500-55-500	www.samsung.kz
	KYRGYZSTAN	00-800-500-55-500	-
	RUSSIA	8-800-555-55-55	www.samsung.ru
	TADJIKISTAN	8-10-800-500-55-500	-
	UKRAINE	8-800-502-0000	www.samsung.com
	UZBEKISTAN	8-10-800-500-55-500	www.samsung.uz

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model

Serial No.

BN68-01518H-00

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.(See back cover for more information)

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.

This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of

borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar

effect to the screen. Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2008 Samsung Electronics Co., Ltd. All rights reserved.

Contents

Connecting and Preparing Your TV

List of Parts.........................................................	2
Installing the Stand.............................................	2
Installing the Wall Mount Kit................................	2
Viewing the Control Panel...................................	3
Viewing the Connection Panel............................	4
Viewing the Remote Control...............................	6
Installing Batteries in the Remote Control..........	7
Switching On and Off..........................................	7
Placing Your Television in Standby Mode...........	7
Viewing the Menus..............................................	8
Using the TOOLS Button....................................	8
Plug & Play.........................................................	9
Setting the Channels
Storing Channels Automatically........................	10
Storing Channels Manually................................	11
Adding / Locking Channels...............................	12
Sorting the Stored Channels.............................	13
Assigning Channels Names..............................	13
Fine Tuning Channel Reception.......................	14
Setting the Picture
Changing the Picture Standard.........................	15
Adjusting the Custom Picture...........................	16
Resetting the Picture Settings to the Factory
Defaults.............................................................	17
Changing the Picture Options...........................	18
Viewing the Picture In Picture (PIP)..................	20
Setting the Sound
Sound Features................................................	21
Selecting the Sound Mode................................	22

Setting the Time
Setting and Displaying the Current Time..........	23
Setting the Sleep Timer....................................	23
Switching the Television On and Off Automatically....	24
Function Description
Choosing Your Language.................................	24
Melody / Energy Saving ...................................	25
Selecting the Source.........................................	26
Editing the Input Source Names.......................	27
Setting the PC
Setting up Your PC Software
(Based on Windows XP)...................................	28
Display Modes..................................................	28
Setting up the TV with your PC.........................	29
Recommendations For Use
Teletext Feature................................................	30
Using the Anti-Theft Kensington Lock
(depending on the model).................................	31
Troubleshooting: Before Contacting Service
Personnel..........................................................	32
Technical and Environmental Specifications ....	33

English

Symbol Press Note

Button

English - 1

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

M4XL16

Remote Control &
Batteries	Power Cord	Cover-Bottom	Stand Screw X 4	Stand	Cleaning Cloth
(AAA x 2)
 Owner’s Instructions		 Warranty card	 Safety Guide		 Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

Installing the Stand

2

1

1.Connect your LCD TV and the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when assembling them.

2.Fasten two screws at position 1 and then fasten two screw at position 2.

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.

The stand is installed for models with the screen size of 37 inch and above.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

Viewing the Control Panel

Side Panel buttons

		1
		2
		3
		4
5	6	5

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources (TV, Ext., AV, Component, PC, HDMI1, HDMI2).

In the on-screen menu, use this button as you use the ENTER button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3

Press to decrease or increase the volume.

In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control.

4

Press to change channels. In the on-screen

menu, use the buttons as you use the ▲ and ▼ buttons on the remote control.

(Without the Remote Control, you can turn on the TV by using the Channel buttons.)

5Speakers

6(Power)

Press to turn the TV on and off.

Remote Control Sensor

Aim the remote control towards this spot on the TV.

Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

English -

Viewing the Connection Panel

1		2																								3		4 5					6

Power Input

8

7

9

5 3

8

1

6

4

2

7

				Power Input
9

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

English -

1PC IN [PC] / [AUDIO]

-Connect to the video and audio output jack on your PC.

2COMPONENT IN

-Connect component video cables (optional) to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out connectors on the DVD.

-If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to component connector (“PR”, “PB”, “Y”) on your set.

-The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to corresponding audio out connectors on the DVD

3HDMI IN 1, HDMI IN 2

-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

-No additional Audio connection is needed for an HDMI to HDMI connection.

-When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

-“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.

-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports

multi - channel digital audio.

DVI IN(HDMI2) [R-AUDIO-L]

- DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

	480i	480p	576i	576p	720p	1080i
HDMI/DVI 50Hz	X	X	X	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O
Component	O	O	O	O	O	O

4 AUDIO OUT [R-AUDIO-L]

- Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre.

5 ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

- An outdoor aerial / A cable television network / A satellite network

6 SERVICE

- Connector for SERVICE only.

7 EXT

	Connector		Input		Output
		Video	Audio (L/R)	RGB	Video + Audio (L/R)
	EXT	O	O	O	Only TV output is available.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

English -

8AV IN [VIDEO]/[R-AUDIO-L]

-Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V device.

9Kensington Lock (depending on the model)

-The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The location of the Kensington Lock may be different depending on its model.

Viewing the Remote Control

1 Television Standby button

2 Selects the TV mode directly

3 Number buttons for direct channel access

4 One/Two-digit channel selection

5 + : Volume increase

: Volume decrease

6 Temporary sound switch-off

7 Use to quickly select frequently used functions.

8 Use to see information on the current broadcast

9 Colour buttons :

Use these buttons in the Channel list, etc.

!Displays the Channel List on screen

@ Available source selection

# Previous channel

$ P : Next channel

P: Previous channel

%Returns to the previous menu

^Control the cursor in the menu

& Exit the on-screen menu * Picture size selection

( Displays the main on-screen menu

) Selects the HDMI mode directly.

a Picture effect selection

Teletext Functions

2 Exit from the teletext display

7 Teletext size selection

8 Teletext reveal

9 Fastext topic selection

0Alternately select Teletext, Double, or Mix.

! Teletext store

@Teletext mode selection (LIST/FLOF)

# Teletext sub page

$ P : Teletext next page

P: Teletext previous page % Teletext hold

& Teletext cancel ( Teletext index

TOOLS

P.SIZE

The performance of the remote control may be affected by bright light.

English -

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2.Press the button on your set.

You also can press the POWER button or the TV button on the remote control to turn the TV on.

The channel that you were watching last is reselected automatically

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on your set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWERbutton on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2.To switch your set back on, simply press the POWER, numeric buttons (0~9), TV button or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial. 

English -

Viewing the Menus

1.With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input.

2.Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s submenu.

3.Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

	TV		Picture
		Mode	: Standard			
		Backlight			7
		Contrast			95
		Brightness			45
		Sharpness			50
		Colour			50
		Tint	G 50		R 50
		Picture Options	: OK			
		Reset				
		Move	Enter		Return

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.

1.Press the TOOLS button. The “Tools” menu will appear.

2.Press the ▲ or ▼ button to select a menu.

3.Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.

•Picture Mode, see page 15

•Sound Mode, see page 21

•Sleep Timer, see page 23

•SRS TS XT, see page 21

•Energy Saving, see page 25

•Dual l-ll, see page 22

•PIP, see page 20

•Auto Adjustment, see page 29

		Tools
Picture Mode				◄	Standard ►
Sound Mode		:			Custom
Sleep Timer		:			Off
SRS TS XT		:			Off
Energy Saving		:			Off
Dual l-ll		:			Mono
Move		Adjust			Exit
TOOLS

English -

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1.Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ button.

Press the ENTER button to confirm your choice.

Plug & Play

Start Plug & Play.

OK

Enter

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

We recommend setting the TV to "Home Use" mode for the best picture in your home environment.

"Store Demo" mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

6.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER button at any time to interrupt the memorization process.

7.Press the ENTER button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.

You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.

8.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.

When you have finished, press the ENTER button.

Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.

Language: Select your language.

Country: Select your country.

Auto Store: Automatically scans for and stores channels available in the local area.

Clock Set: Sets the current time for the TV clock.

English -

If you want to reset this feature...

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup" then press the ENTER button.

2.Press the ENTER button again, to select "Plug & Play". For further details on setting up options, refer to the page 9.

The “Plug & Play” feature is only available in the TV mode.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Energy Saving	: Off	
PIP		
Move	Enter	Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country).

Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune		
Move	Enter	Return

2.Press the ENTER button to select "Country".

3.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

4.Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.

5.Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.

6.After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

English - 10

Storing Channels Manually

You can store television channels, including those received					TV	Channel	
via cable networks.					Auto Store	: Belgium
When storing channels manually, you can choose:					Country		
					Channel Manager		
♦ Whether or not to store each of the channels found.					Manual Store		
					Name		
♦ The programme number of each stored channel which you wish					Sort		
					Fine Tune		
to identify.
1. Press the MENU button to display the menu.
	Press the ▲ or ▼ button to select "Channel", then press the				Move	Enter	Return
	ENTER	button.			TV	Manual Store
2. Press the ▲ or ▼ button to select "Manual Store", then press
					Programme	: P 1	
	the ENTER		button.		Sound System	: BG
					Colour System	: Auto	
3.	Select the required option by pressing the ▲ or ▼ button,				Channel	: S 6
					Store	: ?
					Search	: 140 MHz
	then press the ENTER			button.
4. When you are satisfied with your setting, press the
	ENTER	button.

5. Press the EXIT button to exit.

Move

Enter

Return

♦Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦Colour System: Auto/PAL/SECAM/NTSC4.43

−Press the ▲ or ▼ button to select the required colour standard.

♦Sound System: BG/DK/I/L

−Press the ▲ or ▼ button to select the required sound standard.

♦Channel (When you know the number of the channel to be stored)

−Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

−Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.

♦Search (When you do not know the channel numbers)

−Press the ▲ or ▼ button to start the search.

−The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

♦Store (When you store the channel and associated programme number)

−Set to "OK" by pressing the ENTER button.

Channel mode

−P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

−C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

−S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 11

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add channels.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

2.Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.

♦Adding channels

Using the Channel List, you can add channels.

3.Select "Channel List" by pressing the ENTER button.

4.Move to the () field by pressing the ▲, ▼, ◄ or ► button, select a channel to be added, and press the ENTER button to add the channel.

If you press the ENTER button again, the ( ) symbol next to the channel disappears and the channel is not added.

"" is active when "Child Lock" is selected to "On".

♦Locking channels

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio.

5.Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.

6.Select "On" by pressing the ▲ or ▼ button, then press the

ENTER button.

7.Press the ▲ or ▼ button to select "Channel List", then press the ENTER button.

8.Move to the "" field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER button.

If you press the ENTER button again, the ( ) symbol next to the channel disappears and the channel lock is cancelled.

TV		Channel
	Country	: Belgium	
	Auto Store		
	Manual Store		
	Channel Manager		
	Sort		
	Name		
	Fine Tune		
	Move	Enter	Return
TV	Channel Manager

Channel List	: Off	
Child Lock		

Move

Enter

Return

Channel List

P 1 C3

1 / 10

Prog.

0 C--

1C3

2BBC 1

3C74

4C75

5C76

6S3

7S4

8S6

9S7

Add	Lock
Move	Enter
Page	Return

A blue screen is displayed when "Child Lock" is activated.

9.Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "" to be active or inactive.

You can select these options by simply pressing the CH LIST
button on the remote control.	P.SIZE

English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using the auto store.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Sort", then press the ENTER button.

3.Select the channel number that you wish to change by pressing the ▲ or ▼ button.

Press the ENTER button.

The selected channel number and name are moved to right side.

4.Select the number of the programme to which the channel is to be moved by pressing the ▲ or ▼ button.

5.Press the ENTER button. The channel is moved to its new position and all other channels are shifted accordingly.

6.Repeat steps 3 to 5 for another channel to be sorted.

7.Press the EXIT button to exit.

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune		
Move	Enter	Return
TV	Sort

Prog.	Ch.	Name
0	C--	-----	
1	C23	-----
2	S06	-----
3	S07	-----
4	S09	-----
5	S12	-----
6	S13	-----
7	S14	-----
8	S17	-----
9	C21	-----
	
	Move	Enter	Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

2.Press the ▲ or ▼ button to select "Name", then press the ENTER button.

3.If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER button.

The selection bar is displayed around the name box.

4.
	To...	Then...
	Select a letter, number or symbol	Press the ▲ or ▼ button
	Move on the next letter	Press the ► button
	Move back the previous letter	Press the ◄ button
	Confirm the name	Press the ENTER button

TV		Channel
Country		: Belgium	
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune			
Move		Enter	Return
TV		Name
Prog.	Ch.	Name
0	C--	-----
1	C23	-----
2	S06	-----
3	S07	-----
4	S09	-----
5	S12	-----
6	S13	-----
7	S14	-----
8	S17	-----
9	C21	-----
	

Move

Enter

Return

The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)

5.Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.Press the EXIT button to exit.

English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1.Use the number buttons to directly select the channel that you want to fine tune.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3.Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.

4.Press the ◄ or ► button to adjust the fine tuning. Press the ENTER button.

5.Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER button.

TV	Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune		
Move	Enter	Return

	Fine Tune
P 1
		0
	Reset
Adjust	Save	Return

English - 14

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ENTER button again, to select "Mode".

3.Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button.

4.Press the EXIT button to exit.

♦Dynamic: Selects the picture for high-definition in a bright room.

♦Standard: Selects the picture for optimum display in a normal environment.

♦Movie: Selects the picture for comfortable display in a dark room.

The Picture mode must be adjusted separately for each input source.

You can also press the P.MODE button on the remote control to select one of the picture settings.

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select "Picture Mode".

3.Press the ◄ or ► button to select the required option.

4.Press the EXIT or TOOLS button to exit.

			Picture
TV
		Mode	: Standard					
		Backlight						7
		Contrast						95
		Brightness						45
		Sharpness						50
		Colour						50
		Tint	G 50			R		50
		Picture Options	: OK					
		Reset						
		Move	Enter			Return
			Picture
TV
		Mode	:	Dynamic
		Backlight		Standard				7
		Contrast			Movie			95
		Brightness						45
		Sharpness						50
		Colour						50
		Tint	G 50			R		50
		Picture Options	: OK
		Reset
		Move	Enter			Return
				P.SIZE
		Tools
Picture Mode			◄	Standard		►
Sound Mode			: Custom
Sleep Timer			: Off
SRS TS XT			: Off
Energy Saving			: Off
Dual l-ll			: Mono
	Move		Adjust		Exit

English - 15

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3. (On page 15)

2.Press the ▲ or ▼ button to select a particular item. Press the ENTER button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.

4.Press the EXIT button to exit.

♦ Backlight: Adjusts the screen brightness by adjusting the LCD backlight brightness. (0~10)

♦Contrast: Adjusts the lightness and darkness between objects and the background.

♦Brightness: Adjusts the brightness of the whole screen.

♦Sharpness: Adjusts the outline of objects to either

sharpen them or make them more dull.

♦Colour: Adjusts the colours, making them lighter or darker.

♦Tint: Adjusts the colour of objects, making them more red or green for a more natural look.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	R	50
Tint			50
Picture Options	: OK		
Reset			
Move	Enter	Return
▲
Backlight		7
▼

Move

Adjust

Return

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". (26, 32, 37 inch) In PC mode, you can only make changes to "Contrast" and "Brightness". (40 inch)

In TV, Ext., AV modes of the PAL system, you cannot use the "Tint" Function. You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)

The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and that this will reduce the overall running cost.

English - 16

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3 on page 15.

2.Press the ▲ or ▼ button to select "Reset", then press the

ENTER button.

3.Press the ▲ or ▼ button to select "OK" or "Cancel". Press the ENTER button.

4.Press the EXIT button to exit.

The "Reset" will be set for each Picture mode.

TV	Picture
Mode	: Standard		7
Backlight
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	R	50
Tint			50
Picture Options
Reset	:	OK
		Cancel

	Move	Enter	Return

English - 17

Changing the Picture Options

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.

3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

4.When you are satisfied with your setting, press the ENTER button.

5.Press the EXIT button to exit.

In PC mode, you can only make changes to the

“Colour Tone” and “Size” from among the items in “Picture Options”.

♦Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected Picture mode.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	R	50
Tint			50
Picture Options	: OK		
Reset			
Move	Enter	Return

TV	Picture Options
Colour Tone		: Normal	
Size		: Auto Wide	
Screen Mode		: 16:9	
Digital NR		: Auto	
HDMI Black Level		: Normal	
Move		Enter	Return

“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

♦ Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan

You can select the picture size which best corresponds to your viewing requirements.

♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. ♦ Wide Zoom: Magnify the size of the picture more than 4:3.

♦ Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size. ♦ 4:3: This is the default setting for a video movie or normal broadcasting.

♦ Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i) or Component (1080i) signals are input.

"Auto Wide" function is available only in "TV", "Ext." and "AV" mode.

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.

Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by

pressing the ► or ENTER button.Zoom: Select by pressing the ◄ or ►button.

Use the ▲ or ▼button to move the picture up and down. After selecting ,

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

After selecting “Just Scan” in HDMI (1080i) or Component (1080i) mode:

Select by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture. Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER button.

You can initialize the setting.

O You can select these options by simply pressing the P.SIZE
button on the remote control.	P.SIZE

English - 18

♦Screen Mode: 16:9/ Wide Zoom/Zoom/4:3

When setting the picture size to "Auto Wide" in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

♦16:9: Sets the picture to 16:9 wide mode

♦Wide Zoom: Magnify the size of the picture more than 4:3.

♦Zoom: Magnify the size of the picture vertically on screen.

♦4:3: Sets the picture to 4:3 normal mode.

This function is available in "Auto Wide" mode.

This function is not available in “PC”, "Component" or "HDMI" mode.

♦Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

♦HDMI Black Level: Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI(RGB signals).

English - 19

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1.	Press the MENU button to display the menu.		TV	Setup
			Plug & Play	: English	
	Press the ▲ or ▼ button to select "Setup", then press the		Language		
			Time	: Off	
	ENTER	button.	Melody		
			Energy Saving	: Off	
2.	Press the ▲ or ▼ button to select "PIP", then press the		PIP		
3.	ENTER	button.
	Select the required option by pressing the ▲ or ▼ button, then

	4.	press the ENTER		button.	Move	Enter	Return
		When you are satisfied with your setting, press the
					TV	PIP
		ENTER	button.				
	5.	Press the EXIT button to exit.			PIP	: On
					Size	:	
					Source	: TV	
	You may notice that the picture in the PIP window becomes				Position	:	
					Programme	: P1	
		slightly unnatural when you use the main screen to view a
		game or karaoke.
	Easy Setting
	1.	Press the TOOLS button on the remote control.			Move	Enter	Return
	2.	Press the ▲ or ▼ button to select “PIP”, then press the			Tools
		ENTER	button.		Picture Mode	: Standard
	3.	Press the ▲ or ▼ button to select a particular item.			Sound Mode	: Custom
					Sleep Timer	: Off
	4.	Press the ◄ or ► button to select the required option.			SRS TS XT	: Off
	5.	Press the EXIT or TOOLS button to exit.			Energy Saving	: Off
					PIP

♦ PIP: On/Off
You can activate or deactivate the PIP function.				Move	Enter	Exit
	Main picture	Sub picture			PIP
	Component	TV, Ext., AV		PIP	 On	
				Source	: TV
	HDMI 1, 2	TV, Ext., AV
				Size	:
				Position	:
	PC	TV, Ext., AV
				Programme	: P1

♦	Source
	You can select a source of the sub-picture.
♦	Size:		/			/			Move	Adjust	Return
	You can select a size of the sub-picture.

If main picture is in "HDMI" mode, "Size" is available.

♦Position: / / /

You can select a position of the sub-picture.

In Double ( , ) mode, "Position" cannot be selected.

♦Programme

You can select a channel of the sub-picture only when the "Source" is set to "TV".

English - 20

Sound Features

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Sound", then press the

ENTER button.

2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

3.When you are satisfied with your setting, press the ENTER button.

4.Press the EXIT button to exit.

♦Mode: Standard/Music/Movie/Speech/Custom

You can select the type of special sound effect to be used when watching a given broadcast.

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select "Sound Mode".

3.Press the ◄ or ► button to select the desired sound mode.

4.Press the EXIT or TOOLS button to exit.

TV	Sound
Mode	: Custom	
Equalizer	: Off	
SRS TS XT		
Auto Volume	: Off	
TV Speaker	: On	
Sound Select	: Main	
Move	Enter	Return
Tools

Picture Mode	:	Standard
Sound Mode	◄	Custom ►
Sleep Timer	:	Off
SRS TS XT	:	Off
Energy Saving	:	Off
Dual l-ll	:	Mono
Move	Adjust	Exit

♦	Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz	TV		Equalizer
	The sound settings can be adjusted to suit your personal	R
	preferences.
	If you make any changes to these settings, the sound
	mode is automatically switched to "Custom".
		L
		Balance	100Hz	300Hz 1kHz	3kHz	10kHz
		Move		Adjust		Return

♦SRS TS XT: Off/On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select "SRS TS XT".

3.Press the ◄ or ► button to select the "Off" or "On".

4.Press the EXIT or TOOLS button to exit.

	Tools
Picture Mode	: Standard
Sound Mode	: Custom
Sleep Timer	: Off	►
SRS TS XT	◄ Off
Energy Saving	: Off
Dual l-ll	: Mono

Move

Adjust

Exit

TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English - 21

♦Auto Volume: Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

♦TV Speaker: Off/On

If you want to hear the sound through separate speakers, cancel the internal amplifier.

The +, - and MUTE buttons do not operate when the "TV Speaker" is set to "Off".

When "TV Speaker" is set to "Off", you can operate only “Sound Select” (in PIP mode) in Sound menu.

♦Sound Select: Main/Sub

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. − Main: Used to listen to the sound of the main picture.

− Sub: Used to listen to the sound of the sub picture.

Selecting the Sound Mode

You can set the sound mode in the TOOLS menu. When you set to "Dual I-II", the current sound mode is displayed on the screen.

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select “Dual I-II".

3.Press the ◄ or ► button to select required option.

4.Press the ENTER button.

	Audio Type			Dual 1/2			Default
A2	Mono			MONO			Automatic
	Stereo		STEREO ↔ MONO				change
Stereo
	Dual		DUAL 1 ↔ DUAL 2				DUAL 1
	Mono			MONO			Automatic
NICAM	Stereo		MONO ↔ STEREO				change
Stereo	Dual		MONO ↔ DUAL 1				DUAL 1
				DUAL 2

	Tools
Picture Mode	: Standard
Sound Mode	: Custom
Sleep Timer	: Off
SRS TS XT	: Off
Energy Saving	: Off	►
Dual l-ll	◄ Mono
Move	Adjust	Exit

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode.

English - 22

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3.Press the ENTER button to select "Clock Set".

4.	To...	Press the...
	Move to "Month", "Day", "Year", "Hour" or	◄ or ► button.
	"Minute"
	Set the "Month", "Day", "Year", "Hour" or	▲ or ▼ button.
	"Minute"
	Confirm the setting	ENTER	button.

5.Press the EXIT button to exit.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Energy Saving	: Off	
PIP		
Move	Enter	Return
TV	Clock Set
Month	Day	Year
p	01	2008
01
q
Hour	Minute
00	00

Move

Adjust

Return

If you disconnect the power cord, you have to set the clock again.

You can also set "Year", "Month", "Day", "Hour" and "Minute" by pressing the number buttons on the remote control.

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER button.

3.Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER button.

4.Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).

Press the ENTER button.

5.Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select “Sleep Timer”.

3.Press the ◄ or ► button to select the minute.

4.Press the EXIT or TOOLS button to exit.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Energy Saving	: Off	
PIP		
Move	Enter	Return
TV	Time

	Clock Set	: 00 : 00
	Sleep Timer		Off
	Timer 1	30
	Timer 2
		60
	Timer 3
		90
		120
		150
		180

Move	Enter	Return
Tools
Picture Mode	: Standard
Sound Mode	: Custom	►
Sleep Timer	◄ Off
SRS TS XT	: Off
Energy Saving	: Off
Dual l-ll	: Mono

Move

Adjust

Exit

English - 23

Switching the Television On and Off Automatically

1.	Press the MENU button to display the menu.			TV				Setup
	Press the ▲ or ▼ button to select "Setup", then press the			Plug & Play				: English	
	ENTER	button.		Language					
				Time				: Off	
2.	Press the ▲ or ▼ button to select "Time", then press the			Melody					
				PIP				: Off	
				Energy Saving					
	ENTER	button.
3.	Press the ▲ or ▼ button to select "Timer 1", "Timer 2",
	"Timer 3", then press the ENTER		button.
	Three different On/Off Timer Settings can be made.				Move			Enter	Return
	You must set the clock first.
				TV				Timer 1
4.	Press the ◄ or ► button to select the required item below.
				On Time		:	00	Off
	Press the ▲ or ▼ button to adjust to the setting satisfied.			6	00
				5

♦ On Time: Select hour, minute, and "On"/"Off". (To activate	Off Time
timer with the setting satisfied, set to "On".)	00 : 00		Off
	Repeat
♦ Off Time: Select hour, minute, and "On"/"Off". (To activate
		Once
timer with the setting satisfied, set to "On".)	Volume
	10
♦ Repeat: Select "Once", "Everyday", "Mon~Fri", "Mon~Sat",
		► Move	Adjust	Return
or "Sat~Sun".

♦ Volume: Select the desired turn on volume level.

You can set the hour and minute directly by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is on for too long time.

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1.Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Language", then press the ENTER button.

3.Select a particular language by pressing the ▲ or ▼ button repeatedly.

Press the ENTER button.

4.Press the EXIT button to exit.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Energy Saving	: Off	
PIP		
Move	Enter	Return

English - 24

Melody / Energy Saving

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER button.

2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

3.When you are satisfied with your setting, press the ENTER button.

4.Press the EXIT button to exit.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Energy Saving	: Off	
PIP		
Move	Enter	Return

♦Melody: Off/Low/Medium/High

The TV power on/off melody sound can be adjusted.

The Melody does not play

-When no sound is output from the TV because the MUTE button has been pressed

-When no sound is output from the TV because the (Volume) button has been pressed

-When the TV is turned off by Sleep Timer function.

♦Energy Saving: Off/Low/Medium/High

This feature adjusts the screen brightness depending on the surrounding lighting conditions. − Off: Turns off the energy saving function.

− Low: Sets the TV to low energy saving mode.

− Medium: Sets the TV to medium energy saving mode. − High: Sets the TV to high energy saving mode.

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select “Energy Saving”.

3.Press the ◄ or ► button to select the "Off", "Low",

"Medium" or "High".

4.Press the EXIT or TOOLS button to exit.

This function is not available in “PC” mode.(40 inch)

	Tools
Picture Mode	: Standard
Sound Mode	: Custom
Sleep Timer	: Off
SRS TS XT	: Off	►
Energy Saving	◄ Off
Dual l-ll	: Mono

Move

Adjust

Exit

English - 25

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2.Press the ENTER button again, to select "Source List".

Available signal sources: TV, Ext., AV, Component, PC, HDMI1, HDMI2.

You can choose only those external devices that are connected to the TV.

3.Select the required device by pressing the ▲ or ▼ button.

Press the ENTER button.

OPress the SOURCE button on the remote control to toggle between all the available source.

TV mode can be selected by pressing the TV button, number buttons(0~9), and the P/ button on the remote control.

OYou can also watch HDMI mode simply by pressing the HDMI button on the remote control.

TV	Input
Source List	: TV	
Edit Name		
Move	Enter	Return
TV	Source List

TV	:
Ext.
AV	: ----
Component	: ----
PC	: ----
HDMI1	: ----
HDMI2	: ----

Move Enter Return

English - 26

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Edit Name", then press the ENTER button.

3.Press the ▲ or ▼ button to select the device that you wish to edit.

Press the ENTER button.

4.Press the ▲ or ▼ button to select the required device. Press the ENTER button.

5.Press the EXIT button to exit.

TV	Input
Source List	: TV		
Edit Name			
Move	Enter		Return
TV	Edit Name
Ext.	:		----
AV	:
			VCR
Component	:
			DVD
PC	:
HDMI1	:	Cable STB
HDMI2	:	Satellite STB

PVR STB

AV Receiver

Game

q

Move Enter Return

English - 27

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1.First, click on "Control Panel" on the Windows start menu.

2.When the control panel window appears, click on "Appearance and Themes" and a display dialog-box will appear.

3.When the control panel window appears, click on "Display" and a display dialog-box will appear.

4.Navigate to the "Settings" tab on the display dialog-box. The correct size setting (resolution): Optimum1360 X 768

If a vertical-frequency option exists on your display settings dialog box, the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended.

D-Sub Input

	Mode	Resolution	Horizontal	Vertical	Pixel Clock	Sync Polarity
			Frequency (kHz)	Frequency (Hz)	Frequency (MHz)	(H/V)
	IBM	640x350	31.469	70.086	25.175	+/-
		720×400	31.469	70.087	28.322	-/+
		640×480	31.469	59.940	25.175	-/-
		640×480	37.861	72.809	31.500	-/-
		640×480	37.500	75.000	31.500	-/-
		800×600	37.879	60.317	40.000	+/+
	VESA	800×600	48.077	72.188	50.000	+/+
		800×600	46.875	75.000	49.500	+/+
		1024×768	48.363	60.004	65.000	-/-
		1024×768	56.476	70.069	75.000	-/-
		1024×768	60.023	75.029	78.750	+/+
		1360 x 768	47.712	60.015	85.500	+/+

HDMI/DVI Input

	Mode	Resolution	Horizontal	Vertical	Pixel Clock	Sync Polarity
			Frequency (kHz)	Frequency (Hz)	Frequency (MHz)	(H/V)
		640×480	31.469	59.940	25.175	-/-
	VESA	800×600	37.879	60.317	40.000	+/+
		1024×768	48.363	60.004	65.000	-/-
		1360 x 768	47.712	60.015	85.500	+/+

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

English - 28