ONE
PRESSURE BALANCE BATH/SHOWER FITTING
WITH BUILT-IN DIVERTER
MODEL NUMBER:
R116SS Pressure Balance Rough Valve Body
With Built-in Diverter & Screw Driver Stops.
LESS Trim.
T064.602 Bath/shower Trim Kit
With Built-in Diverter
•Brass wall escutcheon with built-in diverter
•Adjustable “3 function” Showerhead
•Brass tub spout
•LESS Valve
T064.602 Shown with R116SS
GENERAL DESCRIPTION:
Cast brass valve body. Washerless 47mm ceramic disc valve cartridge cycles from “Off” to “Cold” to “Hot”. Hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressures. 1/2" NPT threaded inlets/outlets with screwdriver stops. Showerhead has 2.5gpm/9.5L/min. flow restrictor. Integral diverter. Durable brass wall escutcheon. Metal lever handle. Rough-in plaster guard designed for use as thin-wall mounting adapter. Brass tub spout.
PRODUCT FEATURES:
Solid Brass Construction: Durable, ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance.
Pressure Balancing Valve: Maintains output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system engineered to eliminate cross flow and spool “thumping”. Avoids failure due to mineral deposits - ideal for use with hard water.
Built-in Diverter: Easy to use, integrated in valve body and includes positive shut-off. Allows spout and showerhead in any desired installation location.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding.
Integral Plaster Guard and Mounting Plate:
Plaster guard designed to protect valve during installation and to serve as a mounting plate for thin wall installations.
T064.600 Valve Only Trim Kit
With Built-in Diverter
•Brass wall escutcheon
•LESS Valve
|
1-5/8" TO 3-1/4" |
|
FINISHED WALL |
|
|
|
1/2" NPT |
|
5-5/8" REF. |
OPTIONAL TO |
|
2-3/8" |
||
FINISHED FLOOR |
||
|
||
|
USUALLY BETWEEN |
|
8-1/8" REF. |
80'' AND 86' |
|
|
|
|
SHW |
"SEE |
|
|
ILLUSTRATION" |
|
|
7-1/4" D. |
|
|
|
|
|
|
|
|
TUB |
|
18" |
|
|
|
OPTIONAL |
|
|
|
|
6-3/4" |
|
|
|
|
1/2" NPT |
|
|
|
1/2" REF. |
|
TOP OF |
|
4" |
|
TUB RIM |
|
|
|
BOTTOM OF |
5-5/8" |
|
|
|
|
||
|
TUB |
|
|
|
|
|
1-3/4" |
|
|
OUTLETS 1/2" NPT |
5-5/8" |
|
|
INLETS |
|
|
|
1/2" NPT |
|
|
|
THREADED INLETS (STOPS) |
SUGGESTED SPECIFICATION:
Bath/shower fitting shall be cast brass construction with all brass spout. Shall also feature washerless ceramic disc valve cartridge. Fitting shall be equipped with a pressure balancing mechanism and hot limit safety stop. Fitting shall be American
Standard Model # R116SS with T064.___.___ trim kit.
PRESSURE BALANCE BATH/SHOWER
B15
© 2008 AS America Inc.