ZyXEL Communications P-630-S User Manual

P-630-S Series

ADSL USB Modem

Quick Start Guide

Version 1.0

7/2005

P-630-S Series Quick Start Guide

Overview

The Prestige 630-S (P-630-S) allows you to have high-speed ADSL Internet
access from a computer via a USB connection.

See the User’s Guide for more information on all features.

1 Installing the USB Driver

System Requirements:

• Windows 98 SE (Second Edition), Windows Me (Millennium Edition), Windows
2000 or Windows XP

or

Macintosh operating system versions 9.1 or later

• An available USB port

1.1 Windows

Screen shots for Windows XP are shown in the following procedure.

Note: You must start the driver setup wizard before connecting the

Prestige to your computer.

1 Close all Windows programs and applications.

2 Insert the CD that came with

your Prestige into the CD-ROM
of your computer. The main
screen displays as shown. Click
Setup. If the setup does not run
automatically, double-click
Setup.exe from the
CD.

2

P-630-S Series Quick Start Guide

3 Wait until you are prompted to connect your Prestige's USB cable to the

computer.

Connect the USB cable to a USB port on your computer.

4 When the installation is completed, you will see this window. Click OK to

close the wizard.

5 Connect the Prestige’s DSL port to a telephone jack using the included

telephone wire.

3

P-630-S Series Quick Start Guide

The USB LED turns on when you have a successful USB connection. The DSL
LED blinks during DSL line initialization and turns steady green when the
Prestige has a DSL connection.

USB

DSL

1.2 Mac

The following two sections describe how to install your and modem for both
Mac OS 9 and X.

Mac OS 9

Screens for Mac OS 9.2 are shown in this section.

1 Close all programs and applications.

2 Insert the included CD into the CD-ROM

drive. An icon for the CD appears. Double­click the CD's icon.

3 Double-click the Mac 9

driver folder.

4

P-630-S Series Quick Start Guide

4 Double-click

SM9A.1.0.C0.smi.sit.

5 Select a folder or click Add to

create a new folder to where
you want to extract this .sit file
and click Choose.

6 The file ADSLModem

2.0.20.smi will be created

in the folder you selected.
Double-click ADSLModem

2.0.20.smi.

7 The ADSLModem 20.2 icon will display on the desktop.

Double-click ADSLModem 20.2.

5

P-630-S Series Quick Start Guide

8 Double-click Driver.

9 Double-click Installation of

ADSL Modem to install the

driver.

10Click Switch Disk to select

a destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click
Install.

6

P-630-S Series Quick Start Guide

11Click Restart to reboot

your computer and
complete the driver
installation.

Mac OS X

Screens for Mac OS 10.3 are shown in this section.

1 Close all programs and applications.

2 Insert the included CD into the CD-ROM drive. An

icon for the CD appears. Double-click the CD's
icon.

3 Double-click the

Mac X driver
folder.

7

4 Double-click

(SMXA.1.0.C0)B

1.sit.

5 Select a folder

or click New
Folder to create

a new folder to
where you want
to extract this
.sit file and click
Choose.

P-630-S Series Quick Start Guide

6 The file

ADSLModem.pk
g will be created

in the folder you
selected.
Double-click

ADSLModem.pk
g to install the

driver.

8

7 A welcome screen

appears. Click Continue.

8 Click Continue.

P-630-S Series Quick Start Guide

9 A screen displays asking

you to agree to the
agreement. Click Agree.

9

P-630-S Series Quick Start Guide

10You will then see the

Select a Destination

screen, select a
destination (this must be
on an actual physical hard
drive on the Macintosh, not
a virtual drive) and click

Continue.

11Click Upgrade.

12You then see a screen

telling you that you must
restart the computer after
the installation completes.
Click Continue
Installation. The driver will
automatically install.

10

P-630-S Series Quick Start Guide

13Click Restart to reboot

your computer and
complete the driver
installation.

2 Accessing the Internet

You will need your Internet access information such as user name and
password if given by your ISP.

ISP
INFORMATION

None Bridge encapsulation with a

A user name and
password

An IP address only Bridge encapsulation with a static

CONNECTION METHOD YOU
ARE USING

dynamic IP address

PPPoA or PPPoE encapsulation Go to Section 2.1 on

IP address

ACTION

Open your browser and
surf the web.

page 11.

Go to Section 2.2 on

page 17.

Note: The VPI and VCI are 8 and 35 by default; if your ISP gave you a

different VPI and VCI, see the User’s Guide.

2.1 PPPoA or PPPoE Dial-up Connection

If you are using PPPoE or PPPoA encapsulation, you must dial up your
Internet connection like a traditional modem.

Note: If your ISP gave you an IP address, see also Section 2.2 on page

17 on how to configure a static IP address on your computer.

11

P-630-S Series Quick Start Guide

2.1.1 Windows

1 After you install the driver and the

Prestige, the ADSL status icon will
appear in the system tray.

2 Double-click the icon to

display the configuration
wizard and select the Setup
tab. Select a PPPoE or
PPPoA profile and click

Reinstall.

3 The dial-up icon appears on

your desktop.

4 Double-click the icon to configure

your user name and password for
Internet access. Enter the user name
and password that your ISP gave
you and click Dial.

12

P-630-S Series Quick Start Guide

2.1.2 Mac

Mac OS 9

1 Click the Apple icon, Control Panels and

ADSL Modem to start the configuration

wizard.

2 Click the Config tab, select a profile

and click Save.

3 Click the Apple icon, Control Panels and TCP/IP.

13

P-630-S Series Quick Start Guide

4 In the TCP/IP screen, select

PPP in the Connect via field.

Select Using PPP Server in
the Configure field or select
Manually and enter the IP
address given by your ISP.

Click the close button at the
top left corner and click Save.

5 Click the Apple icon, Control Panels and Modem.

6 Select PPPoA ADSL modem or

PPPoE ADSL modem in the Connect
via field and ADSL Modem Script in

the Modem field.

Click the close button at the top left
corner and click Save.

7 Click the Apple icon, Control Panels and Remote Access.

14

P-630-S Series Quick Start Guide

8 Select Registered User, enter the user

name and password that your ISP gave
you, enter any number in the Number
field and click Connect.

Mac OS X

1 Click Finder,

Applications and ADSL
Modem.

2 Double-click ADSL

Modem to start the

configuration wizard.

15

P-630-S Series Quick Start Guide

3 Click the Config tab, select a

PPPoE or PPPoA profile and click

Save.

4 Click the Apple icon and System

Preferences.

5 Double-click Network.

6 A New Port Detected screen opens when

the computer detects that the ADSL link
is up. Click OK.

16

P-630-S Series Quick Start Guide

7 In the Network screen, select

Ethernet Adaptor (en x) in
the Show field. Click the
PPPoE tab and select the
Connect using PPPoE check

box. Type the information
from your ISP in the Service

Provider, Account Name,
Password and PPPoE
Service Name fields. Select
the Show PPPoE status in
menu bar check box. Click
Apply Now.

8 Click the PPPoE status menu bar icon at the

right corner and select Connect.

2.2 Setting up Your Computer’s IP Address

Note: This section shows you how to configure an IP address on

your computer. You only need to do this if you were given an
IP address by your ISP.

2.2.1 Windows

Screens for Windows XP are shown in this guide unless otherwise specified.
Steps and screen shots may vary depending on the version of Windows.

1 Click Start, Control Panel and Network Connections.

17

P-630-S Series Quick Start Guide

2 Right-click on the icon that corresponds to your new USB connection (not

the one that corresponds to your network card) and select Properties.

3 In the Properties screen, make sure

the Connect using field displays
"LAN/ATM/ADSL miniport". Select

Internet Protocol (TCP/IP) and click
Properties.

18

P-630-S Series Quick Start Guide

4 Click Use the following IP Address

and fill in the IP address, Subnet
mask and Default gateway (given by
your ISP) fields. Click OK.

2.2.2 Mac

Mac OS 9

1 Click the Apple icon, Control Panels and TCP/IP.

2 In the TCP/IP screen, select

PPP, Routed ADSL Modem

or Bridged ADSL Modem in
the Connect via field and
Manually in the Configure
field. Fill in the IP address,

Subnet mask and Router
address (given by your ISP)

fields.

Click the close button at the
top left corner and click Save.

19

P-630-S Series Quick Start Guide

Mac OS X

1 Click the Apple icon, System Preferences and Network to open the

Network screen.

2 Select Ethernet Adaptor (en

x) that corresponds to your

new USB connection in the
Show field. Click the TCP/IP
tab and select Manually in
the Configure IPv4 drop­down list box. Fill in the IP

address, Subnet mask and
Router (given by your ISP)
fields. Click Apply Now.

3 Troubleshooting

PROBLEM CORRECTIVE ACTION

None of the LEDs
turn on.

Make sure your computer is turned on.

Check the USB cable connections between the Prestige
and your computer.

Check the USB cable (see if the USB cable works with a
different USB device).

Carefully follow the instructions to uninstall and reinstall the
driver. See your User’s Guide on how to uninstall the driver.

If the error persists, you may have a hardware problem. In
this case, you should contact your local vendor.

20

P-630-S Series Quick Start Guide

PROBLEM CORRECTIVE ACTION

Cannot access the
Internet.

Windows does not
auto-detect the
USB connection to
the modem.

Verify the Internet connection settings.

Make sure you entered the correct user name and
password if you are using PPPoE or PPPoA.

Make sure the DSL port is properly connected to the phone
jack with a telephone wire.

Check the telephone wire (use it to plug the phone directly
into the wall jack for a dial tone or try using a different one).

Carefully follow the instructions to uninstall and reinstall the
driver. See your User’s Guide on how to uninstall the driver.

Restart your computer.

Make sure the Prestige is turned on and connected to the
USB port on the computer.

Perform a hardware scan by clicking Start, Settings,

Control Panel and double-clicking Add/Remove
Hardware. (Steps may vary depending on the version of

Windows).

Follow the on-screen instructions to search for the Prestige
and install the driver.

Check for possible hardware conflicts. In Windows, click
Start, Settings, Control Panel, System, Hardware and
then click Device Manager. Verify the status of the Prestige
under Network Adapters. (Steps may vary depending on
the version of Windows).

Connect the Prestige to another computer. If the error
persists, you may have a hardware problem. In this case,
you should contact your local vendor.

Viewing Your Product’s Certifications

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home page

to go to that product's page.

3 Select the certification you wish to view from this page.

21