Zyxel VMG1312-T20A User Manual
Quick Start Guide
Hardware Connections
Connect the power cable and press
the power button.
1
VMG1312-T20A
Wireless N VDSL2 Gateway with USB
2
3
4
Connect a computer using the
yellow Ethernet cable.
Connect a DSL splitter using
the gray telephone cable.
Connect a 3G dongle.
POWER
USB
LAN
LAN
DSL
INTERNET
Internet is ready. Go to Wireless Setup.
ON
INTERNET
Internet is not ready. Go to Internet Setup.
OFF
Check the LEDs
5
Internet Setup
5
Quick Start
IP Address: 192.168.1.1
1/2
Welcome to VMG1312-T20A configuration interface
Username: admin
Password: 1234
See the User’s Guide at www.zyxel.com for more information
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved
Wireless Setup
WLAN
Check Wi-Fi is on.
Secure Wi-Fi with WPS
Press the WPS button until the
1
2
WPS LED blinks orange.
Press the WPS button on the
client.
No WPS
ON
1
If not, turn it on.
WPS
(5 seconds)
(Until...
Blinking
(2 seconds)
2
Wi-Fi Setting
WPS
(Within 2 Minutes)
1
The SSID and wireless key are on
the device sticker.
1
Find the device with this SSID.
2
Enter the wireless key to connect.
Freestanding Installation
Connect the stand carefully as
shown.
1
2
SSID
Wireless key
2
Place the device vertically on a
smooth level surface.
EU Importer: Zyxel Communications, A/S | Generatorvej 8D, 2860 Søborg, Denmark | http://www.zyxel.dk
US Importer: Zyxel Communications, Inc | 1130 North Miller Street Anaheim, CA 92806-2001 | http://www.us.zyxel.com
2/2
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved
Loading...