Zyxel ES1100-24E User Manual [ru]

ES1100 Series
Unmanaged Fast Ethernet Switch
Edition 1, 2/2011
www.zyxel.com
Copyright © 2011 ZyXEL Communications Corporation

About This User's Guide

About This User's Guide
Intended Audience
This manual is intended for people who want to configure the Switch using the web configurator.
Documentation Feedback
Send your comments, questions or suggestions to: techwriters@zyxel.com.tw
Thank you!
The Technical Writing Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 30099, Taiwan.
Need More Help?
More help is available at www.zyx el.com.
• Download Library Search for the latest product updates and documentation from this link. Read
the Tech Doc Overview to find out how to efficiently use the User Guide, Quick Start Guide and Command Line Interface Reference Guide in order to better understand how to use your product.
• Knowledge Base If you have a specific question abo ut your product, the answer may be here.
This is a collection of answers to previously asked questions about ZyXEL products.
•Forum This contains discussions on ZyXEL prod ucts. Learn from others who use ZyXEL
products and share your experiences as well.
3
About This User's Guide
Customer Support
Should problems arise that cannot be solved by the methods listed above, you should conta ct your vendor. If you cannot contact your vendor, then contact a ZyXEL office for the region in which you bought the device.
See http://www.zyxel.com/web/contact_us.php for contact information. Please have the following informatio n ready when you contact an office.
• Product model and serial number.
•Warranty Information.
• Date that you received your device.
• Brief description of the problem and the steps you took to solve it.
4
ES1100 Series User’s Guide

Document Conventions

Document Conventions
Warnings and Notes
These are how warnings and notes are shown in this User’s Guide.
Warnings tell you about things that could harm you or your device.
Note: Notes tell you other important information (for example, other things you may
need to configure or helpful tips) or recommendations.
Syntax Conventions
• The ES1100-16, ES1100-24, and ES1100-24E may be referred to as the “Switch”, the “device”, the “system” or the “product” in this User’s Guide. Differentiation is made where needed.
• Product labels, screen names, field labels and field choices are all in bold font.
• A key stroke is denoted by square brackets and uppercase text, for example, [ENTER] means the “ent er” or “re turn” key on yo ur keyboard.
• “Enter” means for you to type one or more characters and then press the [ENTER] key. “Select” or “choose” means for you to use one of the predefined choices.
• Units of measurement may denote the “metric” value or the “scientific” value. For example, “k” for kilo may denote “1000” or “1024”, “M” for mega may denote “1000000” or “1048576” and so on.
• “e.g.,” is a shorthand for “for instance”, and “i.e.,” means “that is” or “in other words”.
Icons Used in Figures
Figures in this User’s Guide may use the following generic icons. The S witch icon is not an exact representation of your device.
The Switch Computer Notebook computer
Server
5

Safety Warnings

• Do NOT use this product near water, for exam ple, in a wet basement or near a swimming pool.
• Do NOT expose your device to dampness, dust or corrosive liquids.
• Do NOT store things on the device.
• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.
• Do not obstruct the device ventillation slots as insufficient airflow may harm your device.
• Connect ONLY suitable accessories to the device.
• Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on them or stumble over them.
• Always disconnect all cables from this device before servicing or disassembling.
• Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).
• Use ONLY power wires of the appropriate wire gauge for your device. Connect it to a power supply of the correct voltage.
• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord.
• Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.
• If the power adaptor or cord is damaged, remove it from the device and the power source.
• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.
• Fuse Warning! Replace a fuse only with a fuse of the same type and rating.
Safety Warnings
PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11 PRODUIT CONFORME SELON 21CFR 1040.10 ET 1040.11 CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1
6
Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste. Used electrical and electronic equipment should be treated separately.
ES1100 Series User’s Guide

Table of Contents

Table of Contents
Table of Contents......................................................................................................................7
Chapter 1
Getting to Know Your Switch ..................................................................................................9
1.1 Introduction ...................... ... ... .... ... ... .......................................... ... ... .... ... ... ............................ 9
1.2 Features ............................................. ... .... ... .......................................... ... ... .... ... ... ............. 10
1.3 Applications ......................................................................... ... ... ... ....................................... 10
1.3.1 Standalone Workgroup ..................................................... ... ... .... ... ... ... .... ... ................ 10
1.3.2 Bridging ....... ... .... ... ... ... .......................................... .... ... ... ... ... .... .................................11
Chapter 2
Hardware Description and Connection.................................................................................13
2.1 Rear Panel ...................................................................................................................... 13
2.1.1 Rear Panel Power Connection ............................................................ .... ... ... ... ... ....... 13
2.2 Front Panel ...................................... ... ... .......................................... .... ... ... ... .... ... ................ 14
2.2.1 RJ-45 Auto-negotiating Ports ...... .... ... ... ... .... ... ... ... .... ... ... ... ... .... ... ............................. 14
2.2.2 Front Panel Connections ........................... .... ... ... ... .... ... ... ... ... .... ... ... .......................... 14
2.2.3 Front Panel LEDs .................................................................. 15
2.3 Hardware Installation ....................................... ............................................................. .......16
2.3.1 Wall Mounting (ES1100-16 / ES1100-24E Only) .... .... ... ... ... ... .... ... ... ... .... ... ... ... ... .... ... 16
2.3.2 Rack Mounting .................... ... ... ... .......................................... .... ... ... ... .... ... ... ... ... .......17
2.3.3 Mounting the Switch on a Rack .................................................................................. 19
Chapter 3
Troubleshooting......................................................................................................................21
3.1 Improper Network Cabling and Topology ............................................................................ 22
Chapter 4
Product Specifications...........................................................................................................23
Appendix A Legal Information................................................................................................25
7
Table of Contents
8
ES1100 Series User’s Guide
CHAPTER 1

Getting to Know Your Switch

1.1 Introduction

This chapter describes the key features, benefits and applications of your Switch.
The Switch is a 10/100 Mbps multi-port switch that can be used to build high­performance switched workgroup networks. The Switch is a store-and-forward device that offers low latency for high-speed networking. The Switch is designed for workgroups, departments or backbone computing environments for small businesses.
Figure 1 Front Panel
ES1100-16
ES1100-24E
ES1100-24
The Switch has a built-in algorithm that automatically assigns priority to received packets. It can operate in low power idle mode in compliance with IEEE 802.3az Energy Efficient Ethernet (EEE).
9
Loading...
+ 21 hidden pages