ZTE MF96U User Manual
MF96U
User Manual
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: www.ztedevice.com
E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2013 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : 1.0
Edition Time: 11.2013
NOTE:
Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged
work in such space may cause excessive heat and raise ambient temperature, which may lead to
automatic shutdown of the device for your safety. In the case of such event, cool the device in a
well-ventilated place before turning on for normal use.
Confidential and Proprietary Information of ZTE CORPORATION 1
1.Power Button
Press and hold the Power button to switch on/off the device.
2.Charger/USB port
Charge your device.
3.Fucntion Key
Enter or select an item.
4.Left Key
Check the on-screen menu from right to left.
5.Right Key
Check the on-screen menu from left to right.
6.Back Key
Go back to the previous screen.
7. LCD Screen
It indicates the signal type, signal strength, battery, Wi-Fi, etc.
8.microSD card slot
It is where you insert the microSD card.
Getting Started
Introduction
ZTE MF96U is a 3G/4G mobile hotspot device, working in CDMA/LTE network. The client devices can
connect to it via Wi-Fi. The device supports data services, enabling you to communicate anytime and
anywhere.
Outline and Parts
The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
Indicators
When the device is powered on, the following icons will appear on the LCD screen, with the
corresponding indicators listed in the table below:
ZTE MF96U User Manual
2 Confidential and Proprietary Information of ZTE CORPORATION
Icon
Indication
Network signal strength.
Connected to the Internet automatically.
The device has been connected to the Internet.
Roaming network indication.
New message received.
The message inbox is full.
Wi-Fi Status and number of the connected users.
Battery power indication.
The battery is full.
Installing Your Device
Inserting the SIM Card and Battery
1. Remove the back cover.
2. Insert the SIM card into the SIM card slot.
3. Insert the battery as shown with the contacts located against the metal springs, and press the battery
down into the case.
ZTE MF96U User Manual
Confidential and Proprietary Information of ZTE CORPORATION 3
4. Close the back cover.
Inserting the microSD Card
NOTE:
microSD logo is a trademark of SD-3C, LLC.
1. Pull the microSD card cover out of the card slot.
NOTE:
Do not pull the cover rudely, as it is connected with the device.
2. Insert the microSD card into the microSD slot. The following picture shows the correct inserting
direction. You will hear a click when the microSD card locks in place.
3. Close the microSD card cover.
Powering On/Off Your Device
Press and hold the Power button to switch on/off the device.
NOTE:
The device is powered on when the LCD screen lights up.
ZTE MF96U User Manual
4 Confidential and Proprietary Information of ZTE CORPORATION
Sleep Mode
When you enable the Wi-Fi function and use the battery to supply power to the device, once no
user connects to the device within 10 minutes, the device will enter the sleep mode，and the LCD
screen will be turned off. In the sleep mode, the Wi-Fi function will be disabled. Press the Power
button to wake up the device, and the LCD screen will be turned on.
NOTE:
With USB connection if no Wi-Fi user connects to the device within 10 minutes, only the Wi-Fi
function will be disabled. Press the Power button to enable this function.
Charging Your Device
You can charge your device by using the USB cable or adapter.
Use the USB cable to connect your device and PC directly.
Use the adapter and USB cable to connect the wall outlet and your device.
NOTE:
The plug only fits one way to connect your device. Do not use excessive force to insert the plug.
Internet Access
Connection Scenario
The following picture is the application example. All of the client devices can surf on the Internet at the
same time.
ZTE MF96U User Manual
Confidential and Proprietary Information of ZTE CORPORATION 5
NOTES:
You can only use Wi-Fi to connect to this device and make sure the client supports the Wi-Fi function.
Configuring Your PC
Follow the following steps and figures for Windows XP to configure the Wireless Internet
Protocol for your connection.
NOTE:
Wireless Network Connection is used for Wi-Fi connection.
1. Right-click My Network Places, and then select Properties.
2. Right-click the Wireless Network Connection, and then select Properties.
ZTE MF96U User Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
3. Select Internet Protocol (TCP/IP), and then click Properties.
4. Select these two items, and then click OK to finish the configuration.
Connecting to Your Device
1. Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search for available wireless networks.
Loading...