ZTE MF51 Users Guide

ZTE MF51

Quick Guide

ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: [phone]
URL: http://www.zte.com.cn
E-mail: [e-mail]

LEGAL INFORMATION

Copyright © 2011 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.

Version No. : R1.0

Quick Guide

Introduction

ZTE MF51 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA network. It provides
Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere.

Specification

Data Service HSPA:

DL 14.4 Mbps
UL 5.76 Mbps

WCDMA CS: UL 64 kbps/DL 64kbps
WCDMA PS: UL 384 kbps/DL 384kbps

Interface USB and Wi-Fi

Wi-Fi Standard 802.11b/g/n

Wi-Fi Security WEP/WPA/WPA2

USB Version USB 2.0 HIGH SPEED

USB Interface Type Micro USB

Weight 80 g

Dimensions (W×H×D): 102.5 mm*51 mm*13.5 mm

microSD card Support up to 32 GB microSD card

Battery 1500mAh Li-ion battery

*Standby time 100 hours

*Working time 4 hours

Charge time 3 hours

Operate system Windows 7, Windows Vista, Windows XP (SP2 or later), Mac OS (10.5 or later)

Web Browser IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari (4.0 or later), Chrome

(10.0 or later)

Working temperature

Storage temperature

-10 ℃ ~ +60℃

-20 ℃ ~ +70 ℃

Confidential and Proprietary Information of ZTE CORPORATION 1

Charging temperature

Humidity 5%~ 95%

0 ℃ ~ +40 ℃

Notes:

microSD

is a trademark of SD Card Association.

The device’s standby and working time are only for your reference, and based on ideal working
environment.

Getting to Know Your Device

The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.

Interface and Buttons

1.WPS This button is used to start Wi-Fi Protected Setup authentication process and
enable/disable the Wi-Fi function.

z Hold it for about five seconds to activate the WPS process.

z Hold it for about two seconds to enable/disable Wi-Fi function.

2.Charger/USB

port

2 Confidential and Proprietary Information of ZTE CORPORATION

z Charge your device.

z Connect the client to your device via USB cable.

3.Power Hold the Power button to switch on/off the device.

4. Indicators Indicates the status of your device.

Notes:

• Press WPS and Power buttons simultaneously, and hold on about three seconds until all LEDs are off,

then release the buttons, the device will restart automatically and restore to the factory default settings.

Indicators

When the device is powered on, the following icons will light, with the corresponding indications listed in

the table below:

Indicators Status

RED glittering
RED bright

GREEN bright

Battery Indication

Wi-Fi Indication

Network
Indication

GREEN
glittering

LED off

BLUE glittering
BLUE bright
LED off

BLUE glittering
BLUE bright

GREEN
glittering

GREEN bright
LED off

Please charge.
The voltage of battery is low.
The voltage of battery is high.

Fully charged.

Charging when power on
Power off
Low power mode
Fully charged when power off without USB cable
No charging or fully charged under low power mode without
USB cable
No battery
Wi-Fi is active.

WPS is active.
Wi-Fi is inactive or low power mode.
2G Modem data transferring.

Register on 2G network.
3G Modem data transferring.

Register on 3G network.
ERROR or NO network service or No SIM or low power mode.

Description

Hardware Installation

Inserting SIM Card, Memory Card and Battery

1. Use the thumb catch on the device to open the battery cover.

Confidential and Proprietary Information of ZTE CORPORATION 3

2. Insert SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter before removing or inserting the
SIM card, if not, the device or SIM card may be damaged.

3. Insert the memory card into the memory card holder.

4. Insert the battery as shown with the contacts located against the gold springs.

4 Confidential and Proprietary Information of ZTE CORPORATION