Zhone Technologies ADSL2+ User Manual
✓ 48-Port ADSL2+ Pizza Box
IP-DSLAM with Integrated
Splitters
✓ ADSL2+ Bonding (G.Bond)
up to 6 lines
✓ Annex-M (Upstream) and
Annex-L (Reach) Support
✓ SELT and DELT support for
loop testing
✓ Rich L2/L3 support with
QoS for Triple-Play Service
Delivery
Bitstorm-RP
ADSL2+ Reach & High Performance
ADSL2+ IP-DSLAM featuring IP/Ethernet
service-aware models in AC or, DC power
Bitstorm-RP family of compact IP-DSLAM products feature rich IP and
Ethernet functions and support Multi-Play Services over single or,
bonded ADSL2+ lines. Bitstorm-RP family features 48 ADSL2+ ports
with integrated splitters (600/900Ohm-POTS/ISDN), 2 integrated
100/1000BaseT and also 2 SFP based Gigabit Ethernet fiber uplink
✓ Easy to Use Web Interface
with Online Config Help
✓ SNMP support and ZMS
Network Management
interfaces. Products in this family are available in DC or, AC power
models. Compact form-factor and temperature hardened design of
Bitstorm-RP DC Power allow deployment in remote cabinets,
effectively shortening the local loop and providing high bandwidth
connections to subscribers.
Bitstorm-RP delivers line-rate performance and multi-play services
supported by advanced L2/L3 features such as - DHCP Option 82,
IGMP Snooping/Proxy, QoS and Security/Filtering in either Bridged
or, VLAN Switched operating modes.
Bitstorm-RP features an intuitive Web Graphical Interface with online
configuration help for device management. It also supports complete
set of ADSL MIBs for SNMP based management along with ZMS
integration for device fault identification, database backup and
restore.
Field-replaceable fan and filter provide servicability and ensure
longevity in harsh environments. Bitstorm-RP DC models are
temperature hardened to operate in -40C to 65C range of temperature.
Technical Specifications
Dimensions
■ 66mm (Height) x 482mm (Width) x 265mm
(Depth)
Power
■ DC: -42V ~ -56V, Dual A+B feeds
■ AC: 100V ~ 240V
Interfaces
■ 2 x 50-pin connectors for local loop and voice
switch connections
■ 2 x 100/1000BaseT
■ 2 x SFP Based GigE (optional)
■ Serial Craft, Alarm Relay
Ordering Information
Bitstorm-RP
Standards Support
■ ADSL2+ (G.992.1 .2 .3 .5)
■ ADSL2+ G.Bond
■ DHCP Option 82
■ IGMP Snooping and Proxy
Protocol Support
■ RFC 2684 Bridged Encapsulation
■ IEEE 802.1Q VLAN w/ 802.1p Priority Queuing
■ IGMPv2
■ MAC and Host Address Filtering
■ Secure-IP and Secure-VLAN
Management
■ SNMP, Embedded WEB Server, Telnet, CLI,
RADIUS client support for management access
Bandwidth/Distance
■ Up to 28Mbps (single line ADSL2+), 48Mbps (2
lines bonded)
Regulatory Compliance
■ ITU-T K.20
■ ETSI 300-019, 300-386
■ EN 60950
■ CE Conformance
■ RoHS
Operating Requirements
■ Operating Temperature (DC): -40C to 65C
■ Operating Temperature (AC): 0C to 65C
■ Storage Temperature: -40C to 80C
■ Relative Humidity: 5% to 95% (non-condensing)
ADSL2+ IP-DSLAM
Bitstorm-RP-151-AC-EU 48-Port ADSL2+ Annex-A IP-DSLAM, 600 Ohm Splitters, 220V Euro AC Power
Bitstorm-RP-152-AC-NA 48-Port ADSL2+ Annex-A IP-DSLAM, 900 Ohm Splitters, 110V North America AC Power
Bitstorm-RP-153-AC-EU 48-Port ADSL2+ Annex-B IP-DSLAM, ISDN Splitters, 220V Euro AC Power
Bitstorm-RP-151-DC 48-Port ADSL2+ Annex-A IP-DSLAM, 600 Ohm Splitters, -48V DC Power
Bitstorm-RP-152-DC 48-Port ADSL2+ Annex-A IP-DSLAM, 900 Ohm Splitters, -48V DC Power
Bitstorm-RP-153-DC 48-Port ADSL2+ Annex-B IP-DSLAM, ISDN Splitters, -48V DC Power
ADSL2+ CPE with Bonding
6228-I2-xyz ADSL2+ Bridge/Router CPE with 2 Line Bonding and WiFi
ADSL2+ CPE
6238-I2-xyz ADSL2+ Bridge/Router CPE with 2 POTS IAD and 4 FE Ports
6218-I2-xyz ADSL2+ Bridge/Router CPE with WiFi and 4 FE Ports
6212-I3-xyz ADSL2+ Bridge/Router CPE with 4 FE Ports
6211-I3-xyz ADSL2+ Bridge/Router CPE with Integrated Phone Filter
xyz (Country/Region)
Fiber SFP
SFP-GE-LX-1310-DLC Long-Reach (10KM) Duplex Optical Gigabit Ethernet
SFP-GE-SX-850-DLC Short-Reach (500m) Duplex Optical Gigabit Ethernet
2008/07/17 15:40:16
Loading...