✓ Programmable support of
plan 997, 998, FX and
China plan capable of
supporting VDSL2 profiles
8a/b/c/d, 12a/b, 17a and
30a
✓ Optional U0 band for long
reach applications
✓ DMT based packet mode
supports Ethernet-over
VDSL (EoVDSL) with
asymmetric line data rates
of 100Mbps downstream
and 50Mbps upstream, or
symmetric 50Mbps line
data rate.
✓ Auto sensing ethernet
ports
VDSL2 Bridged/Router
6652-A2
VDSL2 Bridged/Router 4-Port Modem
The 6652-A2 is an ethernet-over-VDSL bridge modem utilizing the
Ikanos chipset that complies with carious VDSL standards, and
provides unprecedented braodband service over a single pair of
copper wire. The four 10/100 Base-T Ethernet Ports can easily connect
to any PC or LAN in a home or small office environment. Quality and
multimedia service is ensured with it's powerful traffice control and
management over layer 2 or layer 3. While the NAT/PAT technolgies
share the broadband connection to all its LAN clients for all prevailing
internet applications, the embedded firewall keeps out those malicious
✓ Supports packet transfer
mode with HDLC or EFM
framing for EoVDSL
✓ Integrated Layer 2 switch
with traffic classification
and QoS support,
including IP QoS based on
IP, physical port
✓ IP routing, NAT, PAT, SPI
firewall and packet
filtering
attacks and intrusions. Network management is implemented so it can
be easily configured and managed by the service provider.
Technical Specifications
Dimensions
■ W(10.03in) x D(6.29in) x H(1.65in)
Weight
■ 0.75lbs
Power
■ Input 120~240 VAC 50/60Hz
■ Output 12V 1.5A
Interfaces
■ 1 x RJ11 - VDSL2 uplink
■ 1 x USB port
■ 4 x RJ45 - 10Base-T/100Base-TX Ethernet
■ 1 x ON/OFF Power Switch
■ 1 x Reset
VDSL2 Bridged/Router
Standards Support
■ VDSL
- ITU-T G.993.2 (VDSL2)
- ITU-T G.993.1 (VDSL1)
- ANSI T1-424
- ETSI TS 101 270-1
- ETSI TS 101 270-2
- China MII VDSL standard
- ITU-T G.994.1 (G.hs) based hand shaking
- Supports band plan 997, 998, FX and China
- VDSL2 profiles 8a/b/c/d, 12a/b, 17a and 30a
- EFM (IEEE802.3ah)
- Extended US0 band up to 276kHz
- VLAN to Port mapping
■ Ethernet Interface
- IEEE 802.3/802.3u compliant
- Support 10/100Mbps operation
- Support half/full duplex operation
- Support IEEE 802.3u clause 28-auto
negotiation
- Support Flow Control
- Support Auto MDI/MDIX
- IP Multicast and IGMP snooping
- Support 802.1d
- IEEE 802.1q
- IEEE 802.1p
- Q-in-Q support
■ Routing
- Static routes
- Dynamic routes: RIPv1 or RIPv2
- PPP client
- IGMP proxy
- DHCP server and client
■ Firewall
- SPI firewall
- Access control list absed on IP and port
- Port forwarding, virtual server
- Support for one DMZ host
- ALG support including FTP, PPTP, L2TP
Protocol Support
■ ITU-T G.993.2
■ ITU-T G.993.1
■ ANSI T1.424
■ ETSI TS 101 270-1
■ ETSI TS 101 270-2
■ RIPv1
■ RIPv2
■ UPnP
■ IGMP proxy
Management
■ Web Interface HTTP
■ Telnet
■ CLI
Regulatory Compliance
■ FCC Part 15/68
■ UL
■ CSA
■ CE
■ RoHS Compliant
Operating Requirements
■ Temperature
■ Operating: 0C to 40C / 32F to 104F
■ Non-Operating: -25C to 85C / -13F to 185F
■ Humidity
■ Operating: 5% to 95% Relative Humidity
(Non-Condensing)
■ Non-Operating: 5% to 95% Relative Humidity
(Non-Condensing)
Ordering Information
6652-A2-200 VDSL2+ 4 Port CPE5, NA
6652-A2-302 VDSL2+ 4 Port CPE5, EURO
2008/06/27 12:22:10