HARDWARE OVERVIEW
AF ASSIST LAMP
The AF assist lamp lights up to illuminate the desired object in autofocus mode and gives feedback
about the self-timer countdown.
AF/MF SWITCH
Use the AF/MF switch to choose between automatic and manual focus.
APERTURE RING
Use the aperture ring to control how much light enters the lens and reaches the sensor.
DIOPTER CONTROL
Use the diopter control while looking through the electronic viewfinder to adjust the diopter and
accommodate to differences in vision.
FLASH HOT SHOE
Use the flash hot shoe to attach an external flash.
FN BUTTON
Use the Fn button to lock desired focus and/or automatic exposure settings.
FOCUS RING
Use the focus ring to manually adjust the focus.
ISO SPEED DIAL
Use the ISO speed dial to control how sensitive the sensor is to the light that reaches it.
POWER SWITCH
The power switch is a 3-position toggle. Use it to switch on the camera, to switch between Still and
Video Shooting mode, to switch to standby mode or to switch off the camera.
REAR LED
The rear LED gives feedback in various situations such as switching the camera on, charging the
camera or during an upload process.
SHUTTER BUTTON
Use the shutter button to focus (half-press) and take a picture/start recording a video (full-press).
SHUTTER SPEED DIAL
Use the shutter speed dial to control how long the sensor is exposed to the light that reaches it.
SCOPE OF SUPPLY
ZEISS ZX1 camera
Lens shader
Lens cap
Protection ring
Battery
AC power adapter
USB-C cable
Camera strap and accessories
Quick guide
Safety and warranty leaflet
Loading...