72-154246-02 Revision A — February 2015
Introduction
Port 1 Port 2 Port 3 Port 4
Antenna Port 1
GPIO 24 VD
Power
10/100BaseT Ethernet Port
(with POE)
FX7400 Series readers provide real time, seamless tag processing
for EPC Class1 Gen2 compliant tags. This Quick Start Guide
provides information about installing and connecting the reader. For
more information refer to the FX Series RFID Readers Integrator
Guide, available at http://www.zebra.com/support
Reader Installation
1. Unpack the reader.
2. Set up the reader and tags on a desktop.
3. Connect the antenna to antenna Port 1.
4. Connect the Ethernet cable to the Ethernet port.
Connecting the reader to a subnet that supports DHCP is
recommended. This installation procedure is not guaranteed to
work if DHCP is disabled in the reader an d if the reader is
connected directly to a PC.
FX7400 SERIES
RFID READER
QUICK START GUIDE
5. Connect the AC power supply to a power outlet and connect to
the power port.
NOTE This step is not required for networks supporting
Power-over-Ethernet (POE).
The green power LED remains lit after successful installation.
©2015 Symbol Technologies Inc.
Zebra reserves the right to make c hanges to any product to improve reliability,
function, or design.
Zebra does not assume any product li ability arising out of, or in connect ion with,
the application or use of any product, circuit, or application described herein.
No license is granted, either expres sl y or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Zebra products might
be used. An implied license exis ts only for equipment, circuits, and subsystems
contained in Zebra products.
Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The
Symbol logo is a registered trademark of Symbol Technologies, Inc. , a Zebra
Technologies company.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com
Zebra and the Zebra head graphic are registered trademarks of ZIH
Corp. The Symbol logo is a registered trademark of Symbol
Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc.
Connecting to the Reader
Service Information
To connect via host name:
1. Open a browser. Recommended browsers are IE6, IE7, IE8, or
Mozilla 3.
2. Enter the host name, provided on a label on the reader, in the
browser (e.g., http://fx7400cd3b0d) and press Enter.
The User Login window appears and the reader is ready.
NOTE Connect the reader to a network that supports host
name registration and lookup to ensure the network can
access the reader using the host name. For instance,
some networks can register hostnames through DHCP.
When first connecting to the reader, it is recommended
to keep DHCP enabled in both the PC and in the
reader, although it is not guaranteed that host name will
work all the time.
As an alternative to using the host name on the reader
label, construct it using the reader MAC address on the
bottom of the reader. To do this, enter the prefix
FX7400, followed by the last six characters of the MAC
address. For example, for a MAC address of
0023683BA63A, use the prefix FX7400, followed by
3BA63A. Enter http://FX74003BA63A in the browser
address bar to access the reader.
If you have a problem using the equipment, contact your facility’s
technical or systems support. If there is a problem with the
equipment, they will contact Zebra Support at:
http://www.zebra.com/support.
For the latest version of this guide go to:
http://www.zebra.com/support
Warranty
For the complete Zebra hardware product warranty statement, go
to: http://www.zebra.com/warranty
For Australia Only
For Australia Only. This warranty is given by Zebra Technologies Asia
Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the
Australia Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if
the goods fail to be of acceptable quality and the failure does not amount to
a major failure. Zebra Technologies Corporation Australia’s limited warranty
above is in addition to any rights and remedies you may hav
Australian Consumer Law. If you have any queries, please call Zebra Technologies Corporation at+ 65 6858 0722. You may also visit our website:
http://www.zebra.com
for the most updated warranty terms.
e under the
Additional Information
Following are links to additional information and software:
•
Product Manuals:
http://www.zebra.com/support
This page includes the following guides:
- FX Series RFID Reader Integrator Guide
(p/n 72E-122490-xx)
- FX7400 Series RFID Reader Quick Start Guide
(p/n 72-154246-xx)
- FX7400 Series RFID Reader Regulatory Information
(p/n 72-125267-xx)
- ShowCase II User Guide (p/n 72E-122491-xx)
•
Data Sheet: http://www.zebra.com/FX7400
•
ShowCase II and other related software:
http://www.zebra.com/support
Loading...