EC50/EC55
Enterprise Computer
Quick Start Guide
MN-004022-03EN
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in
many jurisdictions worldwide. All other trademarks are the property of their respective owners.
© 2020 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
Information in this document is subject to change without notice. The software described in this document
is furnished under a license agreement or nondisclosure agreement. The software may be used or copied
only in accordance with the terms of those agreements.
For further information regarding legal and proprietary statements, please go to:
SOFTWARE:http://www.zebra.com/linkoslegal
COPYRIGHTS:http://www.zebra.com/copyright
WARRANTY:http://www.zebra.com/warranty
END USER LICENSE AGREEMENT: http://www.zebra.com/eula
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used, reproduced,
or disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies.
Copyright
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the results of use of, or inability to
use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
2
Device Features
1
2
4
3
5
6
7
9
10
11
8
Figure 1 Front View
EC50/EC55 Enterprise Computer Quick Start Guide
Item Name Description
1 Touch screen Displays all information needed to operate the device.
2 Front camera Takes photos and videos (available on some models).
3 Receiver Use for audio playback in Handset mode.
4 Microphone Use for communications in Speakerphone mode.
5 Exit window Provides data capture using the imager (available on some
models).
6 Power button Turns the display on and off. Press and hold to reset the device or
power off.
7 Proximity/Light sensor Determines proximity for turning off display when in Handset mode.
Determines ambient light for controlling display backlight intensity.
8 Data capture LED Indicates data capture status.
9 Charging/Notification
LED
Indicates battery charging status while charging and application
generated notifications.
10 Scan button Initiates data capture (programmable).
11 Volume Up/Down
Increases and decreases audio volume (programmable).
button
3
EC50/EC55 Enterprise Computer Quick Start Guide
13
14
1615
17
18
19
20
21
22
23
25
24
26
12
Figure 2 Rear View
Item Name Description
12 Standard battery Provides standard battery capacity.
13 Camera flash Provides illumination for the camera.
14 Rear camera Takes photos and videos.
15 Microphone Use for noise cancellation.
16 NFC antenna Provides communication with other NFC-enabled devices.
17 Trigger handle mount Provides electrical contacts (0, 2, or 8 pins) and mounting for the
Trigger Handle.
18 SD/SIM card drawer Provides access to micro SD card and SIM card.
19 Scan button Initiates data capture (programmable).
20 Programmable Button Typically used for PTT communications. Where regulatory
restrictions exist
applications.
21 Microphone Use for communications in handset mode.
22 Hand strap mount Provides mounting point for hand strap and tether accessory.
23 USB-C connector Provides USB host and client communications, and device
charging via cables and accessories.
24 Charging connector Provides device charging via cradles.
25 Speaker Provides audio output for video and music playback. Provides
audio in speakerphone mode.
26 Extended battery Provides extended battery capacity.
1
Pakistan, Qatar
1
button is configurable for use with other
4
EC50/EC55 Enterprise Computer Quick Start Guide
1
Setting Up the Device
To start using the device for the first time:
1. Install a micro secure digital (SD) card (optional).
2. Installing a nano SIM card (optional for EC55 only)
3. Charge the device.
4. Power on the device.
Installing or Replacing a microSD Card
The microSD card slot provides secondary non-volatile storage. For more information, refer to the
documentation provided with the card and follow the manufacturer’s recommendations for use.
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
1. Using your fingernail or a plastic tool, pull out the SD/SIM card drawer.
1 Fingernail or plastic tool access to SD/SIM card drawer
2. Remove the SD/SIM card drawer from the device.
5
EC50/EC55 Enterprise Computer Quick Start Guide
1
3.
Insert or replace the microSD card into the SD/SIM card drawer.
4. Insert the SD/SIM card drawer into the device.
5. Press the SD/SIM card drawer into the device to ensure it is in securely.
Installing or Replacing the SIM Card
NOTE: Only use a nano SIM card. EC55 only.
CAUTION: For proper electrostatic discharge (ESD) precautions to avoid damaging the SIM card. Proper
ESD precautions include, but not limited to, working on an ESD mat and ensuring that the user is properly
grounded.
1. Using your fingernail or a plastic tool, pull out the SD/SIM card drawer.
1 Fingernail or plastic tool access to SD/SIM card drawer
6
EC50/EC55 Enterprise Computer Quick Start Guide
2.
Remove the SD/SIM card drawer from the device.
3. Insert the SIM card into the access drawer.
4. Insert the microSD/SIM card access drawer into the device.
5. Press the SD/SIM card drawer into the device to ensure it is in securely.
Device Charging
Before using the device for the first time, charge the device until the green Charging/Notification light
emitting diode (LED) remains lit. To charge the device use a cable or a cradle with the appropriate power
supply.
The device’s Charging/Notification LED indicates the status of the device charging. See Table 1 on page 8
for device charging status. When charging the device using a Zebra cradle or power supply, the standard
battery charges from fully depleted to 90% in less than two hours. The extended battery charges from fully
depleted to 90% in less than three hours.
NOTE: In many cases the 90% charge provides plenty of charge for daily use.
To achieve the best fast charging results use only Zebra charging accessories. Charge the device at room
temperature.
7
Loading...