EC30
Enterprise Companion
Product Reference Guide
for Android ™ 10
MN-003814-02EN
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in
many jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google
LLC. All other trademarks are the property of their respective owners.
© 2021 Zebra Technologies Corporation and/or its affiliates. All rights reserved.
For further information regarding legal and proprietary statements, go to:
COPYRIGHTS:zebra.com/copyright
WARRANTY:zebra.com/warranty
END USER LICENSE AGREEMENT: zebra.com/eula
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries
(“Zebra Technologies”). It is intended solely for the information and use of parties operating and
maintaining the equipment described herein. Such proprietary information may not be used, reproduced,
or disclosed to any other parties for any other purpose without the express, written permission of Zebra
Technologies.
Copyright
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever
(including, without limitation, consequential damages including loss of business profits, business
interruption, or loss of business information) arising out of the use of, the results of use of, or inability to
use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some
jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Publication Date
July 28, 2021
2
Contents
About This Guide.............................................................................................................................. 10
Introduction .................................................................................................................... 10
Configurations................................................................................................................ 10
Notational Conventions.................................................................................................. 10
Icon Conventions ........................................................................................................... 11
Service Information ........................................................................................................ 11
Determining Software Versions...................................................................................... 11
Determining the Serial Number...................................................................................... 12
Getting Started.................................................................................................................................. 13
Introduction .................................................................................................................... 13
Unpacking ...................................................................................................................... 13
Features......................................................................................................................... 14
Setting Up the Device ................................................................................................... 16
Charging the Device ............................................................................................... 16
Charging Temperature ........................................................................................... 16
Charging Indicators ................................................................................................ 17
Using the Device............................................................................................................................... 18
Home Screen ................................................................................................................. 18
Setting Home Screen Rotation ............................................................................... 19
Status Bar............................................................................................................... 19
Notification Icons.............................................................................................. 19
Status Icons ..................................................................................................... 20
Managing Notifications ........................................................................................... 21
Opening the Quick Access Panel ........................................................................... 22
Quick Access Panel Icons................................................................................ 22
Editing Icons on the Quick Settings Bar ................................................................. 23
Battery Management...................................................................................................... 23
Checking Battery Status ......................................................................................... 23
3
Contents
Monitoring Battery Usage ....................................................................................... 23
Low Battery Notification.......................................................................................... 24
Waking the Device ......................................................................................................... 24
USB Communication...................................................................................................... 24
Transferring Files.................................................................................................... 24
Transferring Photos ................................................................................................ 25
Disconnect from the Host Computer ...................................................................... 25
Settings.............................................................................................................................................. 26
Accessing Settings......................................................................................................... 26
Display Settings ............................................................................................................. 26
Setting the Screen Brightness Manually................................................................. 26
Setting Night Light .................................................................................................. 26
Setting Screen Rotation.......................................................................................... 27
Setting Screen Timeout .......................................................................................... 27
Lock Screen Display............................................................................................... 27
Setting Font Size .................................................................................................... 28
Notification LED Brightness Level .......................................................................... 28
Touch Panel Mode ................................................................................................. 28
Setting the Date and Time ............................................................................................. 28
General Sound Setting................................................................................................... 29
Sound Options........................................................................................................ 29
Setting Wake-Up Sources.............................................................................................. 29
Remapping a Button ...................................................................................................... 30
Remappable Keys.......................................................................................................... 31
Keyboards...................................................................................................................... 31
Keyboard Configuration.......................................................................................... 32
Enabling Keyboards ......................................................................................... 32
Switching Between Keyboards......................................................................... 32
Using the Android and Gboard Keyboards............................................................. 32
Edit Text ........................................................................................................... 32
Entering Numbers, Symbols, and Special Characters ..................................... 32
Language Usage............................................................................................................ 32
Changing the Language Setting ............................................................................. 33
Adding Words to the Dictionary .............................................................................. 33
Notifications.................................................................................................................... 33
Setting App Notifications ........................................................................................ 33
Viewing Notification Settings for All Apps ........................................................ 34
Controlling Lock Screen Notifications .............................................................. 34
Blink Light......................................................................................................... 34
4
Contents
Applications ...................................................................................................................................... 35
Accessing Apps.............................................................................................................. 38
Switching Between Recent Apps............................................................................ 38
Battery Manager............................................................................................................. 38
Opening Battery Manager ...................................................................................... 38
Battery Manager Information .................................................................................. 38
DataWedge Demonstration............................................................................................ 40
Scanner Selection .................................................................................................. 41
PTT Express Voice Client ............................................................................................. 42
PTT Express User Interface ................................................................................... 42
PTT Audible Indicators ........................................................................................... 42
PTT Notification Icons ............................................................................................ 43
Enabling PTT Communication................................................................................ 43
Selecting a Talk Group ........................................................................................... 44
PTT Communication............................................................................................... 44
Creating a Group Call ...................................................................................... 44
Responding with a Private Response .............................................................. 45
Disabling PTT Communication ............................................................................... 45
RxLogger....................................................................................................................... 46
RxLogger Configuration.......................................................................................... 46
Configuration File ................................................................................................... 46
Enabling Logging.................................................................................................... 46
Disabling Logging ................................................................................................... 46
Extracting Log Files ................................................................................................ 46
Backing Up ............................................................................................................. 46
RxLogger Utility ...................................................................................................... 47
Initiating the Main Chat Head........................................................................... 47
Removing the Main Chat Head ........................................................................ 47
Viewing Logs.................................................................................................... 47
Removing a Sub Chat Head Icon..................................................................... 47
Backing Up In Overlay View............................................................................. 47
Sound Recorder............................................................................................................. 47
Data Capture ..................................................................................................................................... 49
Introduction .................................................................................................................... 49
Integrated Imager........................................................................................................... 49
Operational Modes ................................................................................................. 49
RS507/RS507x Hands-Free Imager .............................................................................. 50
RS6000 Bluetooth Ring Scanner............................................................................ 50
Scanning Considerations ............................................................................................... 50
Scanning with Internal Imager........................................................................................ 51
Picklist Mode.................................................................................................................. 52
5
Contents
Scanning with RS6000 Bluetooth Ring Scanner............................................................ 53
Scanning with RS507/RS507X Hands-Free Imager ...................................................... 54
Pairing the RS507/RS507X/RS6000 Hands-Free Imager ............................................. 55
Pairing Using Simple Serial Interface (SSI)............................................................ 55
Pairing Using Bluetooth Human Interface Device .................................................. 56
Pairing a Bluetooth Scanner .......................................................................................... 57
Pairing Using Simple Serial Interface ..................................................................... 57
Pairing Using Bluetooth Human Interface Device .................................................. 58
DataWedge .................................................................................................................... 58
Enabling DataWedge.............................................................................................. 58
Disabling DataWedge............................................................................................. 59
Supported Decoders............................................................................................... 59
Wireless............................................................................................................................................. 62
Wireless Local Area Networks ....................................................................................... 62
Connecting to a Wi-Fi Network............................................................................... 62
Removing a Wi-Fi Network..................................................................................... 63
WLAN Configuration ...................................................................................................... 63
Configuring a Secure Wi-Fi Network ...................................................................... 63
Manually Adding a Wi-Fi Network .......................................................................... 64
Configuring for a Proxy Server ............................................................................... 65
Configuring the Device to Use a Static IP Address ................................................ 66
Wi-Fi Preferences................................................................................................... 66
Additional Wi-Fi Settings ........................................................................................ 67
Wi-Fi Direct............................................................................................................. 67
Bluetooth........................................................................................................................ 68
Adaptive Frequency Hopping ................................................................................. 68
Security................................................................................................................... 68
Bluetooth Profiles ................................................................................................... 69
Bluetooth Power States .......................................................................................... 70
Bluetooth Radio Power........................................................................................... 70
Enabling Bluetooth ........................................................................................... 70
Disabling Bluetooth .......................................................................................... 70
Discovering Bluetooth Device(s) ............................................................................ 70
Changing the Bluetooth Name ............................................................................... 71
Connecting to a Bluetooth Device .......................................................................... 71
Selecting Profiles on the Bluetooth Device............................................................. 71
Unpairing a Bluetooth Device ................................................................................. 71
Cast................................................................................................................................ 72
6
Contents
Accessories....................................................................................................................................... 73
Battery Charging ........................................................................................................... 76
Charging Status...................................................................................................... 76
Charging Temperature ........................................................................................... 76
2-Slot Charge Only Cradle............................................................................................ 77
Setup ...................................................................................................................... 78
Charging the Device ............................................................................................... 78
10-Slot Charge Only Cradle.......................................................................................... 80
Setup ...................................................................................................................... 80
Charging the Device ............................................................................................... 80
10-Slot Locking Charge Only Cradle............................................................................. 82
Setup ...................................................................................................................... 82
Charging the Device ............................................................................................... 82
Manual Release Using a Release Key ................................................................... 83
Basic Lanyard ............................................................................................................... 84
Device Removal ..................................................................................................... 84
Retractable Lanyard...................................................................................................... 85
Device Removal ..................................................................................................... 87
Soft Holster ................................................................................................................... 88
Rigid Holster.................................................................................................................. 89
Device Removal ..................................................................................................... 89
Belt Clip......................................................................................................................... 91
Device Removal ..................................................................................................... 92
Garment Clip................................................................................................................. 93
Device Removal ..................................................................................................... 93
Arm Mount...................................................................................................................... 94
Arm Mount Installation............................................................................................ 94
Device Installation .................................................................................................. 95
Device Removal ..................................................................................................... 96
Strap Installation..................................................................................................... 96
10-Slot Cradle Rack Installation..................................................................................... 97
Rack Mount Installation.................................................................................................. 99
Wall Installation............................................................................................................ 102
Bottom Tray Assembly ......................................................................................... 102
Bracket Wall Mounting.......................................................................................... 102
Rack Mount Plate Installation....................................................................................... 104
Application Deployment................................................................................................................. 109
Security ........................................................................................................................ 109
Secure Certificates....................................................................................................... 109
Installing a Secure Certificate ...................................................................................... 109
7
Contents
Configuring Credential Storage Settings .............................................................. 110
Development Tools ...................................................................................................... 110
Android Application Development ........................................................................ 110
Development Workstation .............................................................................. 110
Enabling Developer Options .......................................................................... 110
EMDK for Android................................................................................................. 111
StageNow ............................................................................................................. 111
GMS Restricted............................................................................................................ 111
ADB USB Setup........................................................................................................... 111
Enabling USB Debugging..................................................................................... 111
Entering Android Recovery Manually ................................................................... 112
Application Installation ................................................................................................. 112
Installing Applications Using the USB Connection ............................................... 113
Installing Applications Using the Android Debug Bridge ...................................... 113
Uninstalling an Application ................................................................................... 113
Performing a System Update....................................................................................... 114
Downloading the System Update Package .......................................................... 114
Performing a System Update Using ADB............................................................. 114
Verifying System Update Installation.................................................................... 115
Enterprise Reset .......................................................................................................... 115
Performing an Enterprise Reset From Device Settings........................................ 115
Downloading the Enterprise Reset Package ........................................................ 115
Performing an Enterprise Reset Using ADB......................................................... 115
Performing a Factory Reset ......................................................................................... 116
Downloading the Factory Reset Package ............................................................ 116
Performing a Factory Reset Using ADB ............................................................... 116
Storage......................................................................................................................... 117
Random Access Memory ..................................................................................... 117
Viewing Memory............................................................................................. 118
Internal Storage .................................................................................................... 118
Viewing Internal Storage ................................................................................ 118
Enterprise Folder .................................................................................................. 118
Managing Apps ............................................................................................................ 118
App Details ........................................................................................................... 118
Managing Downloads................................................................................................... 119
Maintenance and Troubleshooting ............................................................................................... 120
Maintaining the Device................................................................................................. 120
Battery Safety Guidelines............................................................................................. 120
Cleaning Instructions.................................................................................................... 121
Approved Cleanser Active Ingredients ................................................................. 121
8
Contents
Harmful Ingredients .............................................................................................. 121
Device Cleaning Instructions ................................................................................ 122
Special Cleaning Notes ........................................................................................ 122
Cleaning Materials Required ................................................................................ 122
Cleaning Frequency ............................................................................................. 122
Cleaning the Device..................................................................................................... 122
Housing .......................................................................................................... 122
Display ........................................................................................................... 122
Exit Window ................................................................................................... 123
Cleaning Cradle Connectors ................................................................................ 123
Troubleshooting .......................................................................................................... 124
Performing a Soft Reset ....................................................................................... 124
Performing a Hard Reset...................................................................................... 124
EC30..................................................................................................................... 124
2-Slot Charge Only Cradle ................................................................................... 126
10-Slot Charge Only Cradle ................................................................................. 127
10-Slot SmartLock Charge Only Cradle ............................................................... 128
Technical Specifications................................................................................................................ 129
Data Capture Supported Symbologies......................................................................... 129
Decode Distances........................................................................................................ 129
I/O Connector Pin-Outs................................................................................................ 130
2-Slot Charge Only Cradle Technical Specifications ................................................... 130
10-Slot Charge Only Cradle Technical Specifications ................................................. 131
10-Slot SmartLock Charge Only Cradle Technical Specifications ............................... 131
Index ................................................................................................................................................ 133
9
About This Guide
Introduction
This guide provides information about using the EC30 enterprise companion and accessories.
NOTE: Screens and windows pictured in this guide are samples and can differ from actual screens.
Configurations
This guide covers the following configuration:
Configuration Radios Display Memory
EC30 WLAN: 802.11
a/b/g/n/ac/d/h/
i/k/r/w
WPAN:
Bluetooth v5.0
Low Energy
Notational Conventions
Notational conventions are used to highlight important information.
• Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.
3.0” Full
Wide Video
Graphics
Array (854 x
480)
4 GB RAM / 32
GB Flash
Data Capture
Options
2D imager
(SE-2100)
Operating
System
Android-based,
Google ™
Mobile Services
(GMS) 10.
Android-based
AOSP 10.
• Bullets (•) indicate:
• Action items
• Lists of alternatives
10
• Lists of required steps that are not necessarily sequential.
• Sequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.
Icon Conventions
The following icons are used throughout the document. The icons and their associated meanings are
described below.
NOTE: The text here indicates information that is supplemental for the user to know and that is not
required to complete a task.
IMPORTANT: The text here indicates information that is important for the user to know.
CAUTION: If the precaution is not heeded, the user could receive minor or moderate injury.
WARNING: If danger is not avoided, the user CAN be seriously injured or killed.
About This Guide
DANGER: If danger is not avoided, the user WILL be seriously injured or killed.
Service Information
If you have a problem with your equipment, contact Customer Support for your region. Contact information
is available at: zebra.com/support
When contacting support, please have the following information available:
• Serial number of the unit (found on manufacturing label)
• Model number or product name (found on manufacturing label)
• Software type and version number
Customer Support responds to calls by email or telephone within the time limits set forth in support
agreements.
If the problem cannot be solved by Customer Support, the user may need to return the equipment for
servicing and will be given specific directions. We are not responsible for any damages incurred during
shipment if the approved shipping container is not used. Shipping the units improperly can possibly void
the warranty. Remove the microSD card from the device before shipping for service.
If the device was purchased from a business partner, contact that business partner for support.
.
Determining Software Versions
Before contacting Customer Support, determine the current software version on your device.
1. Swipe down from the Status bar with two fingers to open the Quick Access panel, and then touch .
2. Touch About phone.
3. Scroll to view the following information:
• Battery information
11
About This Guide
• SW components
• Legal information
• Model & hardware
• Android version
• Android security patch level
• Android security patch version
• Baseband version
• Kernel version
• Build number
Determining the Serial Number
Before contacting Customer Support, determine the serial number of your device.
Touch About phone > Model & hardware > Serial number.
12
Getting Started
Introduction
This chapter provides information for getting the device up and running for the first time.
Unpacking
1. Carefully remove all protective material from the device and save the shipping container for later
storage and shipping.
2. Verify that the following were received:
• Enterprise Computer
• Regulatory Guide.
3. Inspect the equipment for damage. If any equipment is missing or damaged, contact the Global
Customer Support center immediately.
4. Prior to using the device for the first time, remove the protective shipping film that covers the scan
window and display.
13
Features
Getting Started
Figure 1 Front View
1
2
3
4
5
6
7
8
6
13
9
12
11
10
Number Item Function
1 Recent Displays recently used applications (programmable).
2 Touch Screen Displays all information needed to operate the device.
3 Data Capture LED Indicates data capture status.
4 Charging/Notification
LED
Indicates battery charging status while charging and application
generated notifications.
5 Microphone Use for voice or audio input and recording or for PTT
communications.
6 Scan Button Initiates data capture (programmable).
7 Power Button Turns the display on and off. Press and hold to reset the device
or power off.
8 Exit Window Provides data capture using the imager.
9 PTT Button Initiates push-to-talk communications (programmable).
10 Volume Up/Down Button Increase and decrease audio volume (programmable).
11 Back Displays the previous screen (programmable).
12 Home Button Displays the Home screen (programmable).
13 Speaker Provides audio output for video and music playback. Provides
audio for PTT communications.
14
Figure 2 Rear View
Getting Started
16
16
14
15
Number Item Function
14 USB-C Connector Provides USB host and client communications, device charging
via cables and accessories.
15 3.5 mm Headset Jack For audio output to headset (CTIA standard).
16 Cradle Charging
Provides device charging via cradles and accessories.
Contacts
15
Setting Up the Device
To start using the device for the first time charge the device to at least 30% capacity.
NOTE: When the device is shipped from the factory, it is placed into Ship Mode, where the device enters
its lowest possible power state. The device exits Ship Mode when you dock it in a powered cradle or attach
it to a powered USB cable.
Charging the Device
CAUTION: Do not store the device for extended periods of time as the battery may drain completely and
become unrecoverable.
Use one of the following accessories to charge the EC30.
Table 1 Charging Accessories
Cradles
2-Slot Charge Only Cradle CRD-EC30-2SCHG1-01
10-Slot Charge Only Cradle CRD-EC30-10SC1-01
10-Slot Charge Only Locking Cradle CRD-EC30-10SLC1-01
Charge and Communication Cables
USB-C Charging Cable 1.5 m (4.92 ft) CBL-TC2X-USBC-01
USB-C Charging Cable 1 m (3.28 ft) CBL-TC5X-USBC2A-01
Getting Started
Description Part Number
NOTE: Ensure that you follow the guidelines for battery safety described in the EC30 Integrator Guide.
To charge the battery:
1. Connect the charging accessory to the appropriate power source.
2. Insert the device into a cradle or attach to a cable. The device turns on and begins charging. The
Charging/Notification LED blinks amber while charging, then turns solid green when fully charged.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or accessory always
performs battery charging in a safe and intelligent manner. At higher temperatures (for example,
approximately +37°C (+98°F)) the device or accessory may for small periods of time alternately enable
and disable battery charging to keep the battery at acceptable temperatures. The device or accessory
indicates when charging is disabled due to abnormal temperatures via its LED and a notification appears
on the display.
16
Charging Indicators
Table 2 Charging LED Status Indicators
State Indication
Off Device is not charging. Device is not inserted correctly in the cradle
Slow Blinking Amber (1 blink
every 4 seconds)
Slow Blinking Red (1 blink every
4 seconds)
Solid Green Charging complete.
Solid Red Charging complete but the battery is at end of useful life.
Fast Blinking Amber (2
blinks/second)
Fast Blinking Red (2
blinks/second)
Getting Started
or connected to a power source. Charger/cradle is not powered.
Device is charging.
Device is charging but the battery is at end of useful life.
Charging error, for example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically eight
hours).
Charging error but the battery is at end of useful lif, for example:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically eight
hours).
17
Using the Device
Home Screen
Turn on the device to display the Home screen. Depending on how your system administrator configured
your device, your Home screen may appear differently than the graphics in this section.
After a suspend or screen time-out, the Home screen displays with the lock slider. Touch the screen and
slide up to unlock.
The Home screen provides four additional screens to place widgets and shortcuts. Swipe the screen left or
right to view the additional screens.
NOTE: By default, AOSP devices do not have the same icons on the Home screen as GMS devices. Icons
are shown below for example only.
Home screen icons can be configured by the user and may look different than shown.
Figure 3 Home Screen
18
1 Status Bar Displays the time, status icons (right side), and notification icons (left side).
For more information see Notification Icons on page 19 and Managing
Notifications on page 21.
2 Widgets Launches stand-alone apps that run on the Home screen.
3 Shortcut Icons Opens apps installed on the device.
4 Folder Contains apps.
Setting Home Screen Rotation
By default, the Home screen rotation is disabled.
1. Touch and hold anywhere on the Home screen until the options appear.
2. Touch Home settings.
3. Touch the Allow Home screen rotation switch.
4. Press the Home button.
5. Rotate the device.
Using the Device
Status Bar
The Status bar displays the time, notification icons (left side), and status icons (right side).
If there are more notifications than can fit in the Status bar, a dot displays indicating that more notifications
exist. Swipe down from the Status bar to open the Notification panel and view all notifications and status.
Figure 4 Notification and Status Icons
1 Notification Icons. See Notification Icons on page 19.
2 Status Icons. See Status Icons on page 20.
Notification Icons
Notification icons indicate app events and messages.
Table 3 Notification Icons
Icon Description
1
Main battery is low.
2
More notifications are available for viewing.
Data is syncing.
Indicates an upcoming event. GMS devices only.
19
Using the Device
Table 3 Notification Icons (Continued)
Icon Description
Open Wi-Fi network is available.
Audio is playing.
Problem with sign-in or sync has occurred.
Device is uploading data.
Animated: the device is downloading data. Static: the download is complete.
Device is connected to or disconnected from a virtual private network (VPN).
Preparing internal storage by checking it for errors.
USB debugging is enabled on the device.
Wired headset with a boom module is connected to the device.
Status Icons
Status icons display system information for the device.
Table 4 Status Icons
Icon Description
Wired headset without a boom module is connected to the device.
PTT Express Voice client status. See the PTT Express PTT Notification Icons for a
complete list.
Indicates the RxLogger app is running.
Indicates the Bluetooth scanner is connected to the device.
Indicates the ring scanner is connected to the device in HID mode.
Alarm is active.
Main battery is fully charged.
Main battery is partially drained.
Main battery charge is low.
Main battery charge is very low.
Main battery is charging.
Indicates that all sounds except media and alarms are muted.
20
Table 4 Status Icons (Continued)
Icon Description
Do Not Disturb mode active.
Airplane Mode is active. All radios are turned off.
Bluetooth is on.
The device is connected to a Bluetooth device.
Connected to a Wi-Fi network. Indicates the Wi-Fi version number.
Not connected to a Wi-Fi network or no Wi-Fi signal.
Managing Notifications
Notification icons report the arrival of new messages, calendar events, alarms, and ongoing events. When
a notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons on
page 19 for a list of possible notification icons and their description.
Using the Device
• To view a list of all notifications, open the Notification panel by dragging the Status bar down from the
top of the screen.
Quick Settings Bar
• To respond to a notification, open the Notification panel and then touch a notification. The Notification
panel closes and the corresponding app opens.
• To manage recent or frequently used notifications, open the Notification panel and then touch Manage
notifications. Touch the toggle switch next to an app to turn off all notifications, or touch an app for
more notification options.
• To clear all notifications, open the Notification panel and then touch CLEAR ALL. All event-based
notifications are removed. Ongoing notifications remain in the list.
21
Using the Device
• To close the Notification panel, swipe the Notification panel up.
Opening the Quick Access Panel
Use the Quick Access panel to access frequently used settings (for example, Airplane mode). To get to the
Quick Access Panel:
• If the device is locked, swipe down once.
• If the device is unlocked, swipe down once with two fingers, or twice with one finger.
• If the Notification panel is open, swipe down from the Quick Settings bar.
NOTE: Not all icons are pictured. Icons may vary.
Quick Access Panel Icons
• Display brightness - Use the slider to decrease or increase the brightness of the screen.
• Wi-Fi network - Turn Wi-Fi on or off. To open Wi-Fi settings, touch the Wi-Fi network name.
• Bluetooth settings - Turn Bluetooth on or off. To open Bluetooth settings, touch Bluetooth.
• Battery saver - Turn Battery saver mode on or off. When Battery saver mode is on the performance of
the device is reduced to preserve battery power.
• Invert colors - Invert the display colors.
• Do not disturb - Control how and when to receive notifications.
• Airplane mode - Turn Airplane mode on or off. When Airplane mode is on the device does not connect
to Wi-Fi or Bluetooth.
• Auto-rotate - Lock the device’s orientation in portrait or landscape mode or set to automatically rotate.
• Night Light - Tint the screen amber to make it easier to look at the screen in dim light. Set Night Light to
turn on automatically from sunset to sunrise, or at other times.
• Screen Cast - Share phone content on Chromecast or a television with Google Cast built-in. Touch cast
screen to display a list of devices, then touch a device to begin casting.
• Dark Theme - Toggles dark theme on and off. Dark themes reduce the luminance emitted by the
screen, while meeting minimum color contrast ratios. It helps improve visual ergonomics by reducing
eye strain, adjusting brightness to current lighting conditions, and facilitating screen use in dark
environments, while conserving battery power.
22
Using the Device
• Focus mode - Turn on to pause distracting apps. To open Focus mode settings, touch and hold.
• Bedtime mode - Turn grayscale on and off. Grayscale turns the screen black and white, reducing phone
distractions and improving battery life.
Editing Icons on the Quick Settings Bar
The first several setting tiles from the Quick Access panel become the Quick Settings bar.
Open the Quick Access panel and touch to edit, add, or remove settings tiles.
Battery Management
Observe the recommended battery optimization tips for your device.
• Set the screen to turn off after a short period of non-use (recommended: 15 seconds).
• Reduce screen brightness (recommended: 30-50%).
• Turn off all wireless radios when not in use.
• Turn off automatic syncing for Email, Calendar, Contacts, and other apps.
• Minimize use of apps that keep the device from suspending, for example, music and video apps.
NOTE: Before checking the battery charge level, remove the device from any AC power source (cradle or
cable).
Checking Battery Status
• Open Settings and touch About phone > Battery Information.
Or, swipe up from the bottom of the screen and touch to open the Battery Manager app. See
Battery Manager on page 38.
• Battery present status indicates if the battery is present.
• Battery level lists the battery charge (as a percentage of fully charged).
• Swipe down with two fingers from the status bar to open the quick access panel.
• Battery percentage is displayed next to the battery icon.
Monitoring Battery Usage
The Battery screen provides battery charge details and power management options to extend battery life.
1. Go to Settings.
2. Touch Battery.
Display battery information and power management options for a specific app.
1. Go to Settings.
2. Touch Apps & notifications.
3. Touch an app.
4. Touch Advanced > Battery.
23
Different apps display different information. Some apps include buttons that open screens with settings to
adjust power use. Use the DISABLE or FORCE STOP buttons to turn off apps that consume too much
power.
Low Battery Notification
When the battery charge level drops below 18%, the device displays a notice to connect the device to
power. The user should charge the battery using one of the charging accessories.
When the battery charge drops below 10%, the device displays a notice to connect the device to power.
The user must charge the battery using one of the charging accessories.
When the battery charge drops below 4%, the device turns off. The user must charge the battery using one
of the charging accessories.
• Enable Battery Saver mode. Swipe down from the Status bar and then touch Battery saver.
Waking the Device
The device goes into Suspend mode when you press the Power button or after a period of inactivity (set in
the Display settings window).
Using the Device
1. To wake the device from Suspend mode, press the Power button.
The Lock screen displays.
2. Swipe the screen up to unlock.
• If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock
screen.
• If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking
the screen.
NOTE: If you enter the PIN, password, or pattern incorrectly five times, you must wait 30 seconds before
trying again.
If you forget the PIN, password, or pattern contact your system administrator.
USB Communication
Connect the device to a host computer to transfer files between the device and the host computer.
When connecting the device to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files. For information on USB communication
accessories available for this device, see Accessories.
Transferring Files
Use Transfer files to copy files between the device and the host computer.
1. Connect the device to a host computer using a USB accessory.
2. On the device, pull down the Notification panel and touch Charging this device via USB.
By default, No data transfer is selected.
3. Touch File Transfer.
24
NOTE: After changing the setting to File Transfer, and then disconnect the USB cable, the setting reverts
back to No data transfer. If the USB cable is reconnected, select File Transfer again.
4. On the host computer, open a file explorer application.
5. Locate the device as a portable device.
6. Open the Internal storage folder.
7. Copy files to and from the device or delete files as required.
Transferring Photos
Use PTP to copy photos from the device to the host computer.
1. Connect the device to a host computer using a USB accessory.
2. On the device, pull down the Notification panel and touch Charging this device via USB.
3. Touch PTP.
4. On the host computer, open a file explorer application.
5. Open the Internal storage folder.
6. Copy or delete photos as required.
Using the Device
Disconnect from the Host Computer
CAUTION: Carefully follow the host computer’s instructions to disconnect USB devices correctly to avoid
losing information.
To disconnect the device from the host computer:
1. On the host computer, unmount the device.
2. Remove the device from the USB accessory.
25
Settings
Accessing Settings
There are multiple ways to access settings on a device.
• Swipe down with two fingers from the top of the Home screen to open the Quick Access panel and
touch .
• Double-swipe down from the top of the Home screen to open the Quick Access panel and touch .
• Swipe up from the bottom of the Home screen to open APPS and touch Settings.
Display Settings
Use Display settings to change the screen brightness, enable night light, change the background
image, enable screen rotation, set sleep time, and change font size.
Setting the Screen Brightness Manually
NOTE: For optimal battery life, recommended screen brightness is 30 percent.
Manually set the screen brightness using the touchscreen.
1. Swipe down with two fingers from the Status bar to open the Quick Access panel.
2. Slide the icon to adjust the screen brightness level.
Setting Night Light
The Night Light setting tints the screen amber, making the screen easier to look at in low light.
1. Go to Settings.
2. Touch Display.
3. Touch Night Light.
4. Touch Schedule.
5. Select one of the schedule values:
• None (default)
• Turns on at custom time
• Turns on from sunset to sunrise.
26
By default, Night Light is disabled. Touch TURN ON NOW to enable.
6.
7. Adjust the tint using the Intensity slider.
8. Press the Home button.
Setting Screen Rotation
By default, screen rotation is enabled.
1. Go to Settings.
2. Touch Display > Advanced.
3. Touch Auto-rotate screen.
NOTE: To change the Home screen rotation, see Setting Home Screen Rotation on page 19.
4. Press the Home button.
Setting Screen Timeout
Settings
NOTE: For optimal battery life, the recommended screen timeout is 15 seconds.
Set the screen sleep time.
1. Go to Settings.
2. Touch Display > Screen timeout.
3. Select one of the sleep values.
• 15 seconds (default)
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 30 minutes
4. Press the Home button.
Lock Screen Display
The lock screen display setting wakes the screen when notifications are received.
1. Go to Settings.
2. Touch Display > Advanced.
3. Touch Lock screen display.
4. In the When to show section, enable or disable an option using the switch.
5. Press the Home button.
27
Setting Font Size
Set the size of the font in system apps.
1. Go to Settings.
2. Touch Display > Advanced.
3. Touch Font size.
4. Select one of the font size values.
• Small
• Default
• Large
• Largest.
5. Press the Home button.
Notification LED Brightness Level
Set the brightness of the Notification LED.
Settings
1. Go to Settings.
2. Touch Display > Advanced.
3. Touch Notification LED Brightness Level.
4. Use the slider to set the brightness value (default: 15).
5. Press the Home button.
Touch Panel Mode
The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.
NOTE: A glove can be made of medical latex, leather, cotton, or wool.
1. Go to Settings.
2. Touch Display > Advanced.
3. Touch Touch panel mode.
4. Select:
• Finger Only to use a finger on the screen.
• Finger and Glove to use a finger or a gloved finger on the screen.
5. Press the Home button.
Setting the Date and Time
You are only required to set the time zone or set the date and time if the wireless LAN does not support
Network Time Protocol (NTP).
1. Go to Settings.
2. Touch System > Date & time.
28
Touch Date.
3.
4. In the calendar, set today’s date.
5. Touch OK.
6. Touch Time.
7. Touch the green circle, drag to the current hour and then release.
8. Touch the green circle, drag to the current minute and then release.
9. Touch AM or PM.
10. Touch OK.
11. Touch Use 24-hour format.
12. Press the Home button.
General Sound Setting
Use the Sound settings to configure media and alarm volumes.
1. Go to Settings.
Settings
2. Touch Sound.
3. Touch an option to set sounds.
Sound Options
• Zebra volume controls
• Ring volume - Controls the ringtone volume.
• Media volume - Controls the music, games, and media volume.
• Alarm volume - Controls the alarm clock volume.
• Volume presets
• - Mutes the ring, notifications, and scanner so that the device does not make sounds.
• - Enables all sounds at the user defined levels.
• Do Not Disturb - Mutes some or all sounds and vibrations.
• Shortcut to prevent ringing - Select how the shortcut method prevents ringing.
• Default notification sound - Select a sound to play for all system notifications.
• Default alarm sound - Select a sound to play for alarms.
• Other sounds
• Screen locking sounds - Play a sound when locking and unlocking the screen (default – enabled).
• Charging sounds - Plays a sound and vibrates when power is applied to the device (default - enabled).
• Wireless Emergency alerts - Touch to configure emergency broadcast settings and notifications.
Setting Wake-Up Sources
By default the device wakes from suspend mode when the user presses the Power button. The device can be
configured to wake when the user presses the PTT or Scan buttons on the left side of the device.
29
Go to Settings.
1.
2. Touch Wake-Up Sources.
• HOME - Home button.
• LEFT_TRIGGER_2 - PTT button.
• SCAN - Left scan button.
3. Touch a checkbox. A check appears in the checkbox.
4. Press the Home button.
Remapping a Button
Buttons on the device can be programmed to perform different functions or as shortcuts to installed apps. For
a list of key names and descriptions, refer to: techdocs.zebra.com
NOTE: It is not recommended to remap the scan button.
1. Go to Settings.
2. Touch Key Programmer. A list of programmable buttons displays.
Settings
.
3. Select the button to remap.
4. Touch the BUTTON REMAPPING tab or the SHORTCUT tab that lists the available functions and
applications.
5. Touch a function or application shortcut to map to the button.
NOTE: If you select an application shortcut, the application icon appears next to the button on the Key
Programmer screen.
6. Press the Home button.
30
Remappable Keys
Figure 5 Key Positions
Settings
1
7
6
7
Number Button Description
1 APP_SWITCH Recent Button
2 HOME Home Button
3 BACK Back Button
4 VOLUME_DOWN Volume Down Button
5 VOLUME_UP Volume Up Button
6 BUTTON_L2 PTT Button
7 SCAN Scan Button
2
3
4
5
Keyboards
The device provides multiple keyboard options.
• Android Keyboard - AOSP devices only
• Gboard - GMS devices only
• Enterprise Keyboard - Not pre-installed on the device. Contact Zebra Support for more information.
NOTE: By default the Enterprise and Virtual Keyboards are disabled.
31
Keyboard Configuration
Enabling Keyboards
1. Go to Settings.
2. Touch System > Languages & input > Virtual keyboard > Manage keyboards.
3. Touch a keyboard to enable.
Switching Between Keyboards
• To switch between keyboards, touch in a text box to display the current keyboard.
• On the Gboard keyboard, touch and hold (GMS devices only).
• On the Android keyboard, touch and hold (AOSP devices only).
• On the Enterprise keyboard, touch . Only available with Mobility DNA Enterprise License.Not
pre-installed on the device. Contact Zebra Support for more information.
NOTE: By default the Gboard is enabled. All other virtual keyboards are disabled.
Settings
Using the Android and Gboard Keyboards
Use the Android or Gboard keyboards to enter text in a text field.
To configure the keyboard settings, touch and hold
Edit Text
Edit entered text and use menu commands to cut, copy, and paste text within or across apps. Some apps do
not support editing some or all of the text they display; others may offer their own way to select text.
Entering Numbers, Symbols, and Special Characters
1. Enter numbers and symbols.
• Touch and hold one of the top-row keys until a menu appears then select a number or special character.
• Touch the Shift key once for a single capital letter. Touch the Shift key twice to lock in uppercase. Touch
the Shift key a third time to unlock Capslock.
• Touch
• Touch the
2. Enter special characters.
• Touch and hold a number or symbol key to open a menu of additional symbols. A larger version of the
key displays briefly over the keyboard.
?123 to switch to the numbers and symbols keyboard.
=\< key on the numbers and symbols keyboard to view additional symbols.
, (comma) and then select Android keyboard settings.
Language Usage
Use the Language & input settings to change the device’s language, including words added to the dictionary.
32
Changing the Language Setting
1. Go to Settings.
2. Touch System > Languages & input.
3. Touch Languages. A list of available languages displays.
4. If the desired language is not listed, touch Add a language and select a language from the list.
5. Touch and hold to the right of the desired language, then drag it to the top of the list.
6. The operating system text changes to the selected language.
Adding Words to the Dictionary
1. Go to Settings.
2. Touch System > Languages & input > Advanced > Personal dictionary.
3. If prompted, select the language where this word or phase is stored.
4. Touch + to add a new word or phrase to the dictionary.
5. Enter the word or phrase.
Settings
6. In the Shortcut text box, enter a shortcut for the word or phrase.
7. Press the Home button.
Notifications
Setting App Notifications
To set notification settings for a specific app:
1. Go to Settings.
2. Touch Apps & notifications > SEE ALL XX APPS. The App info screen displays.
3. Select an app.
4. Touch Notifications.
Options vary depending on the app selected.
5. Select an available option:
Show notifications - Select to turn all notifications from this app on (default) or off.
Touch a notification category to display additional options.
• Alerting - Allow notifications from this app to make sound or vibrate the device.
• Pop on screen - Allow notifications from this app to pop notifications on the screen.
• Silent - Do not allow notifications from this app to make sound or vibrate.
• Minimize - In the Notification panel, collapse notifications to one line.
• Advanced - Touch for additional options.
• Sound - Select a sound to play for notifications from this app.
• Vibrate - Allow notifications from this app to vibrate the device.
• Blink light - Allow notifications from this app the light the Notification LED blue.
33
Settings
• Show notification dot - Allow notifications from this app to add a notification dot to the app icon.
• Override Do Not Disturb - Allow these notifications to interrupt when Do Not Disturb is enabled.
Advanced
• Allow notification dot - Do not allow this app to add a notification dot to the app icon.
• Additional settings in the app - Open the app settings.
Viewing Notification Settings for All Apps
To view the notification settings for all apps:
1. Go to Settings.
2. Touch Apps & Notifications.
3. Scroll down to Notifications to view how many apps have notifications turned off.
4. To set or view notifications settings for a specific app, see Setting App Notifications.
Controlling Lock Screen Notifications
To control whether notifications can be seen when the device is locked:
1. Go to Settings.
2. Touch Apps & notifications > Notifications.
3. Touch Notifications on lockscreen and select one of the following:
• Show alerting and silent notifications (default)
• Show alerting notifications only
• Don’t show notifications.
Blink Light
The Notification LED lights blue when an app, such as email and VoIP, generates a programmable notification
or to indicate when the device is connected to a Bluetooth device. By default, LED notifications are enabled.
To change the notification setting:
1. Go to Settings.
2. Touch Apps & notifications > Notifications > Advanced.
3. Touch Blink light to toggle the notification on or off.
34
Applications
The APPS screen displays icons for all installed apps. See Application Deployment for information on
installing and uninstalling apps. For information on standard Android apps, go to the Google Play Apps
store.
The following table describes the apps installed on the device.
Table 5 Apps
Icon Description
Battery Manager - Displays battery information, including charge level, status, health and
wear level.
Bluetooth Pairing Utility – Use to pair a Zebra Bluetooth scanner with the device by
scanning a barcode.
Calculator - Provides the basic and scientific arithmetic functions.
Calendar - Use to manage events and appointments. GMS/GMS-Restricted only.
Calendar - Use to manage events and appointments. Non-GMS devices only.
Chrome - Use to access the Internet or intranet. GMS/GMS-Restricted only.
Chromium - Use to access the Internet or intranet. Non-GMS devices only.
Clock - Use to schedule alarms for appointments or as a wake-up.
Contacts - Use to manage contact information.
35
Applications
Table 5 Apps (Continued)
Icon Description
Cradle Demo - Provides a way to demonstrate features of the locking cradle.
DataWedge - Enables data capture using the imager. For more information, see DataWedge
Demonstration on page 40.
Display Size - Use to adjust the display and font size.
DisplayLink Presenter - Use to present the device screen onto a connected monitor.
Drive - Upload photos, videos, documents, and other files to personal storage site.
GMS/GMS-Restricted only.
DWDemo - Provides a way to demonstrate the data capture features using the imager. For
more information, see DataWedge Demonstration on page 40.
Email - Use to send and receive email. Non-GMS devices only.
Files - Organize and manage files on the device.
Gallery - Use to view photos stored on the internal storage. Non-GMS devices only.
Gmail - Use to send and receive email using a Google email account. GMS/GMS-Restricted
only.
Google - Launches Google ™ search app. GMS/GMS-Restricted only.
Keep Notes - Use to create, edit, and share notes. GMS/GMS-Restricted only.
License Manager - Use to manage software licenses on the device.
Maps - Use to see your location on a map (with public transit, traffic, or satellite overlays).
Search for any business or place of interest. Provides turn-by-turn navigation with voice
guidance, traffic-avoidance, and alternate routes, for drivers, cyclists, walkers, and users of
public transportation. GMS/GMS-Restricted only.
36
Applications
Table 5 Apps (Continued)
Icon Description
Music - Play music stored on the internal storage. Non-GMS devices only.
Phone - Use to dial a phone number when used with some Voice over IP (VoIP) clients
(VoIP telephony ready only).
Photos - Use to sync photos with Google account. GMS/GMS-Restricted only.
Play Movies & TV - View movies and video on your device. GMS/GMS-Restricted only.
Play Store - Download music, movies, books, and Android apps and games from the
Google Play Store. GMS/GMS-Restricted only.
PTT Express - Use to launch PTT Express client for VoIP communication.
RxLogger - Use to diagnose device and app issues. For more information, see RxLogger on
page 46.
Search - Use to search the Web. Requires an Internet connection. Non-GMS devices only.
Settings - Use to configure the device.
Sound Recorder - Use to record audio. For more information, see Sound Recorder on
page 47.
StageNow - Allows the device to stage a device for initial use by initiating the deployment of
settings, firmware, and software.
Videos - Use to view videos on the device. Non-GMS devices only.
VoD - The Video on Device basic app provides a how-to video for proper device cleaning.
For Video on Device licensing information, go to learning.zebra.com
Worry Free Wifi Analyzer - A diagnostic intelligent app. Use to diagnose surrounding area
and display network stats, such as coverage hole detection, or AP in vicinity. Refer to the
Worry Free Wi-Fi Analyzer Administrator Guide for Android.
37
.
Table 5 Apps (Continued)
Icon Description
Accessing Apps
Applications
YouTube - Use to view videos on the YouTube
YT Music - Use to listen to music. GMS/GMS-Restricted only.
Zebra Bluetooth Settings - Use to configure Bluetooth logging.
Zebra Data Services - Use to enable or disable Zebra Data Services. Some options are set
by the system administrator.
™ web site. GMS/GMS-Restricted only.
All apps installed on the device are accessed using the APPS window.
1. On the Home screen, swipe up from the bottom of the screen.
2. Slide the APPS window up or down to view more app icons.
3. Touch an icon to open the app.
Switching Between Recent Apps
Use the Recent button to switch between recently used apps.
1. Touch Recent button.
A window appears on the screen with icons of recently used apps.
2. Slide the apps displayed up and down to view all recently used apps.
3. Swipe left or right to remove app from the list and force close the app.
4. Touch an icon to open an app or touch Back button to return to the current screen.
Battery Manager
The Battery Manager provides detailed information about the battery.
Opening Battery Manager
To open the Battery Manager app, swipe up from the bottom of the Home screen, and then touch .
Battery Manager Information
The Battery Manager displays detailed information about battery charging, health, and status.
38
Applications
Table 6 Battery Icon Description
Battery Icon Description
Battery charge level is between 85% and 100%.
Battery charge level is between 19% and 84%.
Battery charge level is between 0% and 18%.
• Level - The current battery charge level as a percentage. Displays -% when level is unknown.
• Wear - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
• Health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
• Decommission - The battery is past its useful life and should be replaced. See system
administrator.
• Good - The battery is good.
• Charge error - An error occurred while charging. See system administrator.
• Over Current - An over-current condition occurred. See system administrator.
• Dead - The battery has no charge. Replace the battery.
• Over Voltage - An over-voltage condition occurred. See system administrator.
• Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
• Failure Detected - A failure has been detected in the battery. See system administrator.
• Unknown - See system administrator.
• Charge Status
• Not charging - The device is not charging.
• Charging-AC - The device is connected to AC power and charging.
• Charging-USB - The device is connected to a host computer with a USB cable and charging.
• Discharging - The battery is discharging.
• Full - That the battery is fully charged.
• Unknown - The battery status is unknown.
• Time until Full - The amount of time until the battery is fully charged.
• Time since charging - The amount of time since the device began charging.
• Time until empty - The amount of time until the battery is empty.
• Advanced info - Touch to view additional battery information.
• Battery present status - Indicates that the battery is present.
39
Applications
• Battery level - The battery charge level as a percentage of scale.
• Battery scale - The battery scale level used to determine battery level (100).
• Battery voltage - The current battery voltage in millivolts.
• Battery temperature - The current battery temperature in degrees Centigrade.
• Battery technology - The type of battery.
• Battery current - The average current into or out of the battery over the last second in mAh.
• Battery manufacture date - The date of manufacture.
• Battery serial number - The battery serial number. The number matches the serial number printed
on the battery label.
• Battery part number - The battery part number.
• Battery decommission status - Indicates if the battery is past its life span.
• Battery Good - The battery is in good health.
• Decommissioned Battery - The battery is past its useful life and should be replaced.
• Base cumulative charge - Cumulative charge using Zebra charging equipment only.
• Battery present capacity - Maximum amount of charge that could be pulled from the battery under
the present discharge conditions if the battery were fully charged.
• Battery health percentage - With a range from 0 to 100, this is the ratio of “present_capacity” to
“design_capacity” at a discharge rate of “design_capacity”.
• % decommission threshold - The default % decommission threshold for a gifted battery as 80%.
• Battery present charge - Amount of usable charge remaining in the battery at present under the
current discharge conditions.
• Battery total cumulative charge - The total accumulated charge in all chargers.
• Battery time since first use - The time passed since the battery was placed in a Zebra terminal for
the first time.
• Battery error status - The error status of the battery.
• App version - The application version number.
DataWedge Demonstration
Use DataWedge Demonstration to demonstrate data capture functionality. To configure DataWedge,
refer to techdocs.zebra.com/datawedge/
NOTE: DataWedge is disabled on the Home screen. To enable DataWedge on the Home screen, go to the
DataWedge Launcher profile and enable Barcode input option.
.
40
Applications
Table 7 DataWedge Demonstration Icons
Icon Description
Illumination Imager illumination is on. Touch to turn illumination off.
Imager illumination is off. Touch to turn illumination on.
Data Capture The data capture function is through the internal imager.
A Bluetooth scanner is connected.
A Bluetooth scanner is not connected.
Scan Mode Imager is in picklist mode. Touch to change to normal scan mode.
Imager is in normal scan mode. Touch to change to picklist mode.
Menu Opens a menu to view the application information or to set the
Scanner Selection
To select a scanner, touch > Settings > Scanner selection.
See the Data Capture section for more information.
Press the programmable button or touch the yellow scan button to capture data. The data appears in the
text field below the yellow button.
application DataWedge profile.
41
PTT Express Voice Client
PTT Express Voice Client enables Push-To-Talk (PTT) communication between disparate enterprise
devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers
simple PTT communication without requiring a voice communication server.
• Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
• Private Response: Double-press the PTT button to respond to the originator of the last broadcast or to
make a Private Response.
PTT Express User Interface
Figure 6 PTT Express Default User Interface
Notification Icon
Applications
Settings
Service Indication
Talk Group
Table 8 PTT Express Default User Interface Descriptions
Item Description
Notification Icon Indicates the current state of the PTT Express client.
Service Indication Indicates the status of the PTT Express client. Options: Service Enabled,
Service Disabled or Service Unavailable.
Talk Groups Lists all 32 Talk Groups available for PTT communication.
Settings Opens the PTT Express Settings screen.
Enable/Disable
Switch
Turns the PTT service on and off.
Enable/Disable Switch
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
42
• Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for you to start
talking.
• Access Tone: Single beep. Plays when another user just finished a broadcast or response. You can
now initiate a Group Broadcast or Private Response.
• Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60
seconds).
• Network Tone:
• Three increasing pitch beeps. Plays when PTT Express acquires the WLAN connection and the
service is enabled.
• Three decreasing pitch beeps. Plays when PTT Express loses the WLAN connection or the service
is disabled.
PTT Notification Icons
Notification icons indicate the current state of the PTT Express Voice client.
Table 9 PTT Express Icon Descriptions
Applications
Status Icon Description
The PTT Express Voice client is disabled.
The PTT Express Voice client is enabled but not connected to a WLAN.
The PTT Express Voice client is enabled, connected to a WLAN, and listening on the
Talk Group indicated by the number next to the icon.
The PTT Express Voice client is enabled, connected to a WLAN, and communicating on
the Talk Group indicated by the number next to the icon.
The PTT Express Voice client is enabled, connected to a WLAN, and in a private
response.
The PTT Express Voice client is enabled and muted.
The PTT Express Voice client is enabled but it is not able to communicate due to a VoIP
telephony call in progress.
Enabling PTT Communication
1. Swipe up from the bottom of the Home screen and touch .
2. Slide the Enable/Disable Switch to the ON position. The button changes to ON.
43
Selecting a Talk Group
One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be
enabled at a time on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.
PTT Communication
NOTE: This section describes the default PTT Express client configuration. Refer to the PTT Express V1.2
User Guide for detailed information on using the client.
PTT communication may be established as a Group Call. When PTT Express is enabled, the PTT button
on the left side of the device is assigned for PTT communication. When the Wired Headset is used, Group
Calls can also be initiated using the headset Talk button. When not using a headset, optimal placement of
EC30 microphone is two and six inches from your mouth.
NOTE: When using a wired headset, use only Zebra approved wired headsets with a PTT button.
Figure 7 PTT Button
Applications
1 PTT button
Creating a Group Call
NOTE: When using a wired headset, use only Zebra approved wired headsets with a PTT button.
1. Press and hold the PTT button (or the Talk button on the headset) and listen for the talk tone.
If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure
that PTT Express and the WLAN are enabled.
2. Start talking after hearing the talk tone.
NOTE: Holding the button for more than 60 seconds (default) drops the call, allowing others to make
Group calls. Release the button when finished talking to allow others to make calls.
1
44
Responding with a Private Response
The Private Response can only be initiated once a Group Call has been established. The initial Private
Response is made to the originator of the Group Call.
1. Wait for an access tone.
2. Within 10 seconds, double-press the PTT button, and listen for the talk tone.
3. If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure
that PTT Express and the WLAN are enabled.
4. Start talking after the talk tone plays.
5. Release the button when finished talking.
Disabling PTT Communication
1. Swipe up from the bottom of the Home screen and touch .
2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF.
3. Press the Home button.
Applications
45
RxLogger
RxLogger is a comprehensive diagnostic tool that provides application and system metrics, and diagnoses
device and application issues. RxLogger logs the following information: CPU load, memory load, memory
snapshots, battery consumption, power states, wireless logging, cellular logging, TCP dumps, Bluetooth
logging, GPS logging, logcat, FTP push/pull, ANR dumps, etc. All generated logs and files are saved onto
flash storage on the device (internal or external).
RxLogger Configuration
RxLogger is built with an extensible plug-in architecture and comes packaged with a number of plug-ins
already built-in. For information on configuring RxLogger, refer to techdocs.zebra.com/rxlogger/
To open the configuration screen, from the RxLogger home screen touch Settings.
Configuration File
RxLogger configuration can be set using an XML file. The config.xml configuration file is located on the
microSD card in the
connection. Edit the configuration file and then replace the XML file on the device. There is no need to stop
and restart the RxLogger service since the file change is automatically detected.
Applications
.
RxLogger\config folder. Copy the file from the device to a host computer using a USB
Enabling Logging
To enable logging:
1. Swipe the screen up and select .
2. Touch Start.
3. Press the Home button.
Disabling Logging
To disable logging:
1. Swipe the screen up and select .
2. Touch Stop.
3. Press the Home button.
Extracting Log Files
1. Connect the device to a host computer using an USB connection.
2. Using a file explorer, navigate to the RxLogger folder.
3. Copy the file from the device to the host computer.
4. Disconnect the device from the host computer.
Backing Up
RxLogger Utility allows the user to make a zip file of the RxLogger folder in the device, which by default
contains all the RxLogger logs stored in the device.
46
To save the backup data, touch > BackupNow.
RxLogger Utility
RxLogger Utility is a data monitoring application for viewing logs in the device while RxLogger is running.
Logs and RxLogger Utility features are accessed using Main Chat Head.
Initiating the Main Chat Head
To initiate the Main Chat Head:
1. Open RxLogger.
2. Touch > Toggle Chat Head. The Main Chat Head icon appears on the screen.
3. Touch and drag the Main Chat head icon to move it around the screen.
Removing the Main Chat Head
To remove the Main Chat Head icon:
1. Touch and drag the icon. A circle with an X appears.
Applications
2. Move the icon over the circle and then release.
Viewing Logs
To view logs:
1. Touch the Main Chat Head icon. The RxLogger Utility screen appears.
2. Touch a log to open it. The user can open many logs with each displaying a new sub Chat Head.
3. If necessary, scroll left or right to view additional Sub Chat Head icons.
4. Touch a Sub Chat Head to display the log contents.
Removing a Sub Chat Head Icon
To remove a sub chat Head icon, press and hold the icon until it disappears.
Backing Up In Overlay View
RxLogger Utility allows the user to make a zip file of the RxLogger folder in the device, which by default
contains all the RxLogger logs stored in the device.
The Backup icon is always available in Overlay View.
1. Touch . The Backup dialog box appears.
2. Touch Yes to create the back up.
Sound Recorder
Use Sound Recorder to record audio messages.
Recordings are saved on the internal storage, and are available in the Play Music application (GMS
devices).
Touch to open options menu.
47
Applications
• File type - Select the file type for the recording file.
• AMR
• 3GPP
• AAC
• WAV
• AMR-WB
• AMR-WB-3GPP.
• Storage location - Select the location for the recording file.
• Phone storage
48
Data Capture
Introduction
The device supports data capture using:
• Integrated imager
• RS507/RS507X Hands-free imager
• RS6000 Bluetooth Ring Scanner.
Integrated Imager
The device with an integrated 2D imager has the following features:
• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear, postal,
PDF417, Digimarc, and 2D matrix code types.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.
The imager uses imaging technology to take a picture of a barcode, and executes state-of-the-art software
decoding algorithms to extract the barcode data from the image.
Operational Modes
The device with an integrated imager supports two modes of operation, listed below. Activate each mode
by pressing the Scan button.
• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view. The
imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.
NOTE: To enable Pick List Mode, configure in DataWedge or set in an application using a API command.
• Pick List mode - Selectively decode a barcode when more than one barcode is in the device’s field of
view by moving the aiming crosshair or dot over the required barcode. Use this feature for pick lists
containing multiple barcodes and manufacturing or transport labels containing more than one barcode
type (either 1D or 2D).
49
Data Capture
RS507/RS507x Hands-Free Imager
The RS507 and RS507x Hands-free Imagers are wearable barcode scan solution for both 1D and 2D bar
code symbologies. The scanner supports Bluetooth Human Interface Device (HID) connection to the
device.
Figure 8 RS507/RS507x Hands-Free Imager
Refer to the RS507/RS507x Hands-free Imager Product Reference Guide for more information.
RS6000 Bluetooth Ring Scanner
The RS6000 Bluetooth Ring Scanner is a wearable bar code scan solution for both 1D and 2D bar code
symbologies.
Figure 9 RS6000 Bluetooth Ring Scanner
Refer to the RS6000 Bluetooth Ring Scanner Product Reference Guide for more information.
Scanning Considerations
Typically, scanning is a simple matter of aim, scan, and decode, with a few quick trial efforts to master it.
However, consider the following to optimize scanning performance:
• Range: Scanners decode best over a particular working range — minimum and maximum distances
from the barcode. This range varies according to barcode density and scanning device optics. Scan
within range for quick and constant decodes; scanning too close or too far away prevents decodes.
Move the scanner closer and further away to find the right working range for the barcodes being
scanned.
• Angle: Scanning angle is important for quick decodes. When the illumination/flash reflects directly back
into the imager, the specular reflection can blind/saturate the imager. To avoid this, scan the barcode
so that the beam does not bounce directly back. Do not scan at too sharp an angle; the scanner needs
to collect scattered reflections from the scan to make a successful decode. Practice quickly shows what
tolerances to work within.
50
• Hold the device farther away for larger symbols.
• Move the device closer for symbols with bars that are close together.
NOTE: Scanning procedures depend on the app and device configuration. An app may use different
scanning procedures from the one listed above.
Scanning with Internal Imager
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows
the user to enable the imager, decode the barcode data, and display the barcode content.
To scan with the internal imager:
1. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
2. Point the exit window on the top of the device at a barcode.
Figure 10 Imager Scanning
Data Capture
3. Press and hold the scan button. The white aiming pattern turns on to assist in aiming.
NOTE: When the device is in Picklist mode, the imager does not decode the barcode until the crosshair on
the device display overlays the barcode.
4. Ensure the barcode is within the area formed by aiming pattern.
Figure 11 Aiming Pattern
5. The Data Capture LED lights green and a beep sounds, by default, to indicate the barcode was
decoded successfully.
6. Release the scan button.
51
NOTE: Imager decoding usually occurs instantaneously. The device repeats the steps required to take a
digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed.
7. The barcode content data displays in the text field.
Picklist Mode
When Picklist Mode is enabled, the screen displays an image of the barcode and a red cross-hair. The
imager does not decode the barcode until the cross-hair touches the barcode.
Figure 12 Pick List Mode with Multiple Barcodes in Aiming Pattern
Data Capture
To read multiple barcodes, a scan-enabled application is required. The device contains the DataWedge
application that allows the user to enable the imager, decode the barcode data and display the barcode
content.
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the exit window on the top of the device at the barcodes.
3. Press and hold the scan button.
The white aiming pattern turns on to assist in aiming.
4. Ensure the barcodes are within the area formed by the aiming pattern.
5. The Data Capture LED lights green and a beep sounds, by default, to indicate the barcode was
decoded successfully. Captured data from all barcodes is delivered as a single string.
6. Release the scan button.
52
Data Capture
NOTE: Imager decoding usually occurs instantaneously. The device repeats the steps required to take a
digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed.
7. The barcode content data displays in the text field.
Scanning with RS6000 Bluetooth Ring Scanner
To read a barcode, a scan-enabled app is required. Devices that contain the Zebra DataWedge app allows
you to enable the scanner to decode barcode data and display the barcode content.
To scan with the RS6000:
1. Pair the RS6000 with the device. See Pairing Using Bluetooth Human Interface Device for more
information.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the RS6000 at a barcode.
4. Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed
by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
The RS6000 LEDs light green and a beep sounds to indicate the barcode was decoded successfully.
When the RS6000 is in Pick List mode, the RS6000 does not decode the barcode until the center of the
crosshair touches the barcode.
Figure 13 RS6000 Aiming Pattern
53
Data Capture
Figure 14 RS6000 Pick List Mode with Multiple Barcodes in Aiming Pattern
5. The captured data appears in the text field.
Scanning with RS507/RS507X Hands-Free Imager
To read a barcode, a scan-enabled app is required. The device contains the DataWedge app that allows
you to enable the scanner to decode barcode data and display the barcode content.
To scan with the RS507/RS507X:
1. Pair the RS507/RS507X with the device. See Pairing Using Simple Serial InterfacePairing Bluetooth
Scanners or
Pairing Using Bluetooth Human Interface Device for more information.
2. Ensure that an app is open on the device and a text field is in focus (text cursor in text field).
3. Point the RS507/RS507X at a barcode.
4. Press and hold the trigger.
The red laser aiming pattern turns on to assist in aiming. Ensure the barcode is within the area formed
by the cross-hairs in the aiming pattern. The aiming dot increases visibility in bright lighting conditions.
The RS507/RS507X LEDs light green and a beep sounds to indicate the barcode was decoded
successfully. When the RS507/RS507X is in Pick List mode, the RS507/RS507X does not decode the
barcode until the center of the crosshair touches the barcode.
54
Data Capture
Figure 15 RS507/RS507X Aiming Pattern
Figure 16 RS507/RS507X Pick List Mode with Multiple Barcodes in Aiming Pattern
5. The captured data appears in the text field.
Pairing the RS507/RS507X/RS6000 Hands-Free Imager
To connect the RS507/RS507X or RS6000 imager to the device, use one of the following methods:
• Simple Serial Interface (SSI)
• Bluetooth Human Interface Device (HID) Mode.
Pairing Using Simple Serial Interface (SSI)
To pair the RS507/RS507X or RS6000 with the device using SSI.
1. Swipe up from the bottom of the Home screen and touch .
55
Data Capture
Using the RS507/RS507X or RS6000, scan the barcode on the screen.
2.
The RS507/RS507X or RS6000 emits a string of high/low/high/low beeps. The Scan LED flashes green
indicating that the RS507/RS507X or RS6000 is attempting to establish connection with the device.
When connection is established, the Scan LED turns off and the RS507/RS507X or RS6000 emits one
string of low/high beeps.
A notification appears on the Notification panel and the icon appears in the Status bar.
Pairing Using Bluetooth Human Interface Device
To pair the RS507/RS507X or RS6000 with the device using Human Interface Device (HID):
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
3. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
4. Place the RS507/RS507X or RS6000 in HID mode. If the RS507/RS507X or RS6000 is already in HID
mode, skip to step 5.
a. Remove the battery from the RS507/RS507X or RS6000.
b. Press and hold the Restore key.
c. Install the battery onto the RS507/RS507X or RS6000.
d. Keep holding the Restore key for about five seconds until a chirp is heard and the Scan LEDs flash
green.
e. Scan the barcode below to place the RS507/RS507X or RS6000 in HID mode.
Figure 17 RS507 Bluetooth HID Barcode
56
Data Capture
Figure 18 RS6000 Bluetooth HID Barcode
5. Remove the battery from the RS507/RS507X or RS6000.
6. Re-install the battery into the RS507/RS507X or RS6000.
7. Go to Settings.
8. Touch Bluetooth.
9. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area
and displays them under Available devices.
10. Scroll through the list and select RS507/RS507X or RS6000.
The device connects to the RS507/RS507X or RS6000 and Connected appears below the device
name. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is
established.
A notification appears on Notification panel and the icon appears in the Status bar.
Pairing a Bluetooth Scanner
Connect the scanner to the device using one of the following methods:
• Simple Serial Interface (SSI) mode
• Bluetooth Human Interface Device (HID) mode.
Pairing Using Simple Serial Interface
To pair the scanner with the device using SSI:
1. Ensure that the two devices are within 10 meters (32.8 feet) of one another.
2. Install the battery into the scanner.
3. On the device swipe up from the bottom of the Home screen and touch .
57
Data Capture
Using the scanner, scan the barcode on the screen.
4.
The scanner emits a high/low/high/low beeps. The Scan LED flashes green indicating that the scanner
is attempting to establish connection with the device. When connection is established, the Scan LED
turns off and the scanner emits one string of low/high beeps.
5. On the device touch .
Pairing Using Bluetooth Human Interface Device
To pair the scanner with the device using HID:
1. Remove the battery from the scanner.
2. Replace the battery.
3. After the scanner reboots, scan the barcode below to place the scanner in HID mode.
4. On the device, swipe down from the Status bar to open the Quick Access panel and then touch .
5. Touch Bluetooth.
6. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area
7. Scroll through the list and select XXXXX xxxxxx, where XXXXX is the scanner and xxxxxx is the serial
DataWedge
DataWedge is a utility that adds advanced barcode scanning capability to any application without writing
code. It runs in the background and handles the interface to built-in barcode scanners. The captured
barcode data is converted to keystrokes and sent to the target application as if it was typed on the keypad.
DataWedge allows any app on the device to get data from input sources such as a barcode scanner, MSR,
RFID, voice, or serial port and manipulate the data based on options or rules.
Configure DataWedge to:
• Provide data capture services from any app.
• Use a particular scanner, reader or other peripheral device.
and displays them under Available devices.
number.
The device connects to the scanner, the scanner beeps once and Connected appears below the
device name. The Bluetooth device is added to the Paired devices list and a trusted (“paired”)
connection is established.
• Properly format and transmit data to a specific app.
To configure DataWedge refer to techdocs.zebra.com/datawedge/
Enabling DataWedge
1. Swipe up from the bottom of the Home screen and touch .
2. Touch > Settings.
.
58
Touch the DataWedge enabled checkbox. A blue checkmark appears in the checkbox indicating that
3.
DataWedge is enabled.
4. Press the Home button.
Disabling DataWedge
1. Touch .
2. Touch Settings.
3. Touch DataWedge enabled.
The blue check disappears from the checkbox indicating that DataWedge is disabled.
Supported Decoders
NOTE: DataWedge supports the decoders listed below but not all are validated on this device.
Table 10 Supported Decoders
Data Capture
Decoders
SE2100
Internal Imager
Australian Postal O O O
Aztec X X X
Canadian Postal O O --
Chinese 2 of 5 O O O
Codabar X X X
Code 11 O O O
Code 128 X X X
Code 39 X X X
Code 93 O O O
Composite AB O O O
Composite C O O O
Discrete 2 of 5 O O O
Datamatrix X X X
RS6000
RS507/RS507X
59
Data Capture
Table 10 Supported Decoders (Continued)
Decoders
SE2100
Internal Imager
Dutch Postal O O O
DotCode O O O
EAN13 X X X
EAN8 X X X
Grid Matrix O O O
GS1 DataBar X X X
GS1 DataBar
Expanded
GS1 DataBar Limited O O O
GS1 Datamatrix O O --
GS1 QRCode O O --
HAN XIN -- O --
Interleaved 2 of 5 O O O
Japanese Postal O O O
Korean 3 of 5 O O O
MAIL MARK X X --
Matrix 2 of 5 O O O
Maxicode X X X
MicroPDF O O O
MicroQR O O O
MSI O O O
PDF417 X X X
QR Code X X X
Decoder Signature O O O
TLC 39 O O O
Trioptic 39 O O O
UK Postal O O O
UPCA X X X
X X X
RS6000
RS507/RS507X
60
Data Capture
Table 10 Supported Decoders (Continued)
Decoders
SE2100
Internal Imager
UPCE0 X X X
UPCE1 O O O
US4state O O O
US4state FICS O O O
US Planet O O O
US Postnet O O O
RS6000
RS507/RS507X
Key
X = Enabled
O = Disabled
-- = Not Supported
Touch the Back button to return to the previous screen.
61
Wireless
This section provides information on the following wireless features:
• Wireless Local Area Network (WLAN)
• Bluetooth
• Cast
Wireless Local Area Networks
Wireless local area networks (WLANs) allow the device to communicate wirelessly inside a building.
Before using the device on a WLAN, the facility must be set up with the required hardware to run the
WLAN (sometimes known as infrastructure). The infrastructure and the device must both be properly
configured to enable this communication.
Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches,
Radius servers, etc.) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Wireless &
networks settings configure the device to match the security scheme.
The device supports the following WLAN security options:
• None
• EnhancedOpen
• Wireless Equivalent Privacy (WEP)
• Wi-Fi Protected Access (WPA)/WPA2 Personal (PSK)
• WPA/WPA2/WPA3 Enterprise (EAP)
• WPA3-Enterprise 192-bit
The Status bar displays icons that indicate Wi-Fi network availability and Wi-Fi status.
NOTE: To extend the life of the battery, turn off Wi-Fi when not in use.
Connecting to a Wi-Fi Network
To connect to a Wi-Fi network:
1. Go to Settings.
2. Touch Wi-Fi to open the Wi-Fi screen. The device searches for WLANs in the area and lists them.
62
Scroll through the list and select the desired WLAN network.
3.
4. For open networks, touch profile once or press and hold and then select Connect or for secure
networks enter the required password or other credentials then touch Connect. See the system
administrator for more information.
The device obtains a network address and other required information from the network using the
dynamic host configuration protocol (DHCP) protocol. To configure the device with a fixed internet
protocol (IP) address, see Configuring the Device to Use a Static IP Address on page 66.
5. In the Wi-Fi setting field, Connected appears indicating that the device is connected to the WLAN.
Removing a Wi-Fi Network
To remove a remembered or connected network:
1. Go to Settings.
2. Touch Network & Internet > W-Fi.
3. Scroll down to the bottom of the list and touch Saved networks.
4. Touch the name of the network.
5. Touch FORGET.
Wireless
6. Press the Home button.
WLAN Configuration
This section provides information on configuring Wi-Fi settings.
Configuring a Secure Wi-Fi Network
1. Go to Settings.
2. Touch Network & Internet > Wi-Fi.
3. Slide the switch to the ON position.
4. The device searches for WLANs in the area and lists them on the screen.
5. Scroll through the list and select the desired WLAN network.
6. Touch the desired network. If the network security is Open, the device automatically connects to the
network. For all other network security a dialog box appears.
7. If the network security is WPA/WPA2-Personal, WPA3-Personal, or WEP, enter the required password
and then touch Connect.
8. If the network security is WPA/WPA2/WPA3 Enterprise:
• Touch the EAP method drop-down list and select one of the following:
• PEAP
• TLS
• TTLS
• PWD
• LEAP.
• Touch the Phase 2 authentication drop-down list and select an authentication method.
63
Wireless
• If required, touch CA certificate and select a Certification Authority (CA) certificate. Note:
Certificates are installed using the Security settings.
• If required, touch User certificate and select a user certificate. Note: User certificates are installed
using the Location & security settings.
• If required, in the Identity text box, enter the username credentials.
• If desired, in the Anonymous identity text box, enter an anonymous identity username.
• If required, in the Password text box, enter the password for then given identity.
9. If the network security is WPA3-Enterprise 192-bit:
• Touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
• Touch User certificate and select a user certificate. Note: User certificates are installed using the
Security settings.
• In the Identity text box, enter the username credentials.
NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring
for a Proxy Server for setting connection to a proxy server and see Configuring the Device to Use a Static
IP Address for setting the device to use a static IP address.
10. Touch Connect.
11. Press the Home button.
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network
when out of range.
1. Go to Settings.
2. Touch Network & Internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. Scroll to the bottom of the list and select Add network.
5. In the Network name text box, enter the name of the Wi-Fi network.
6. In the Security drop-down list, set the type of security to:
• None
• Enhanced Open
• WEP
• WPA/WPA2-Personal
• WPA3-Personal
• WPA/WPA2/WPA3-Enterprise
• WPA3-Enterprise 192-bit
7. If the network security is None , touch Save.
8. If the network security is WEP, WPA3-Personal, or WPA/WPA2-Personal, enter the required
password and then touch Save.
9. If the network security is WPA/WPA2/WPA3-Enterprise:
64
Wireless
• Touch the EAP method drop-down list and select one of the following:
• PEAP
• TLS
• TTLS
• PWD
• LEAP.
• Touch the Phase 2 authentication drop-down list and select an authentication method.
• If required, touch CA certificate and select a Certification Authority (CA) certificate. Note:
Certificates are installed using the Security settings.
• If required, touch User certificate and select a user certificate. Note: User certificates are installed
using the Security settings.
• If required, in the Identity text box, enter the username credentials.
• If desired, in the Anonymous identity text box, enter an anonymous identity username.
• If required, in the Password text box, enter the password for the given identity.
10. If the network security is WPA3-Enterprise 192-bit:
• Touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
• Touch User certificate and select a user certificate. Note: User certificates are installed using the
Security settings.
• In the Identity text box, enter the username credentials.
NOTE: By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring
for a Proxy Server on page 65 for setting connection to a proxy server and see Configuring the Device to
Use a Static IP Address on page 66 for setting the device to use a static IP address.
11. Touch Save. To connect to the saved network, touch and hold on the saved network and select
Connect to network.
12. Press the Home button.
Configuring for a Proxy Server
A proxy server is a server that acts as an intermediary for requests from clients seeking resources from
other servers. A client connects to the proxy server and requests some service, such as a file, connection,
web page, or other resource, available from a different server. The proxy server evaluates the request
according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is
validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting
the service on behalf of the client.
It is important for enterprise customers to be able to set up secure computing environments within their
companies, making proxy configuration essential. Proxy configuration acts as a security barrier ensuring
that the proxy server monitors all traffic between the Internet and the intranet. This is normally an integral
part of security enforcement in corporate firewalls within intranets.
1. Go to Settings.
2. Touch Network & Internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. In the network dialog box, select and touch a network.
65
Wireless
Touch Advanced options.
5.
6. Touch Proxy and select Manual.
7. In the Proxy hostname text box, enter the address of the proxy server.
8. In the Proxy port text box, enter the port number for the proxy server.
9. In the Bypass proxy for text box, enter addresses for web sites that are not required to go through the
proxy server. Use a comma “,” between addresses. Do not use spaces or carriage returns between
addresses.
10. Touch Connect.
11. Press the Home button.
Configuring the Device to Use a Static IP Address
By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an
Internet protocol (IP) address when connecting to a wireless network.
1. Go to Settings.
2. Touch Network & Internet > Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. In the network dialog box, select and touch a network.
5. Touch Advanced options.
6. Touch IP settings and select Static.
7. In the IP address text box, enter an IP address for the device.
8. If required, in the Gateway text box, enter a gateway address for the device.
9. If required, in the Network prefix length text box, enter the prefix length.
10. If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.
11. If required, in the DNS 2 text box, enter a DNS address.
12. Touch Connect.
13. Press the Home button.
Wi-Fi Preferences
Use the Wi-Fi preferences to configure advanced Wi-Fi settings. From the Wi-Fi screen scroll down to the
bottom of the screen and touch Wi-Fi preferences.
• Turn on Wi-Fi automatically - When enabled, Wi-Fi automatically turns back on when near high
quality saved networks.
• Open network notification - When enabled, notifies the user when an open network is available.
• Advanced - Touch to expand options.
• Additional settings - See Additional Settings.
• Install Certificates – Touch to install certificates.
• Network rating provider - Disabled (AOSP devices). To help determine what constitutes a good
Wi-Fi network, Android supports external Network rating providers that provide information about
the quality of open Wi-Fi networks. Select one of the providers listed or None. If none are available
or selected, the Connect to open networks feature is disabled.
66
• Wi-Fi Direct - Displays a list of devices available for a direct Wi-Fi connection.
• MAC address - Displays the Media Access Control (MAC) address of the device when connecting
to Wi-Fi networks.
• IP address - Displays the IP address of the device when connecting to Wi-Fi networks.
Additional Wi-Fi Settings
NOTE: Additional Wi-Fi settings are for the device, not for a specific wireless network.
Use the Additional Settings to configure additional Wi-Fi settings. To view the additional Wi-Fi settings,
scroll to the bottom of the Wi-Fi screen and touch Wi-Fi Preferences > Advanced > Additional settings.
• Regulatory
• Country Selection - Displays the acquired country code if 802.11d is enabled, else it displays the
currently selected country code.
• Region code - Displays the current region code.
• Band and Channel Selection
• Wi-Fi frequency band - Set the frequency band to: Auto (default), 5 GHz only or 2.4 GHz only.
Wireless
• Available channels (2.4 GHz) - Touch to display the Available channels menu. Select specific
• Available channels (5 GHz) - Touch to display the Available channels menu. Select specific
• Logging
• Advanced Logging – Touch to enable advanced logging or change the log directory.
• Wireless logs - Use to capture Wi-Fi log files.
• About
• Version - Displays the current Fusion information.
Wi-Fi Direct
Wi-Fi Direct devices can connect to each other without having to go through an access point. Wi-Fi Direct
devices establish their own ad-hoc network when required, letting you see which devices are available and
choose which one you want to connect to.
1. Go to Settings.
channels and touch OK.
channels and touch OK.
• Fusion Logger - Touch to open the Fusion Logger application. This application maintains a
history of high level WLAN events which helps to understand the status of connectivity.
• Fusion Status - Touch to display live status of WLAN state. Also provides information about the
device and connected profile.
2. Touch Wi-Fi > Wi-Fi preferences > Advanced > Wi-Fi Direct. The device begins searching for
another Wi-Fi Direct device.
3. Under Peer devices, touch the other device name.
4. On the other device, select Accept.
Connected appears on the device. On both devices, in their respective Wi-Fi Direct screens, the other
device name appears in the list.
67
Bluetooth
Bluetooth devices can communicate without wires, using frequency-hopping spread spectrum (FHSS)
radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM)
band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 m (32.8 ft))
communication and low power consumption.
Devices with Bluetooth capabilities can exchange information (for example, files, appointments, and tasks)
with other Bluetooth enabled devices such as printers, access points, and other mobile devices.
The device supports Bluetooth Low Energy. Bluetooth Low Energy is targeted at applications in the
healthcare, fitness, security, and home entertainment industries. It provides reduced power consumption
and cost while maintaining standard Bluetooth range.
Adaptive Frequency Hopping
Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used
with Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH
to work. There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections
and discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:
Wireless
Security
• Channel Classification - A method of detecting an interference on a channel-by-channel basis, or
pre-defined channel mask.
• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth
network.
• Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping
channels.
• Channel Maintenance - A method for periodically re-evaluating the channels.
When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate
channels. AFH coexistence allows enterprise devices to operate in any infrastructure.
The Bluetooth radio in this device operates as a Class 2 device power class. The maximum output power
is 2.5 mW and the expected range is 10 m (32.8 ft). A definition of ranges based on power class is difficult
to obtain due to power and device differences, and whether in open space or closed office space.
NOTE: It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b
operation is required.
The current Bluetooth specification defines security at the link level. Application-level security is not
specified. This allows application developers to define security mechanisms tailored to their specific need.
Link-level security occurs between devices, not users, while application-level security can be implemented
on a per-user basis. The Bluetooth specification defines security algorithms and procedures required to
authenticate devices, and if needed, encrypt the data flowing on the link between the devices. Device
authentication is a mandatory feature of Bluetooth while link encryption is optional.
68
Pairing of Bluetooth devices is accomplished by creating an initialization key used to authenticate the
devices and create a link key for them. Entering a common personal identification number (PIN) in the
devices being paired generates the initialization key. The PIN is never sent over the air. By default, the
Bluetooth stack responds with no key when a key is requested (it is up to user to respond to the key
request event). Authentication of Bluetooth devices is based-upon a challenge-response transaction.
Bluetooth allows for a PIN or passkey used to create other 128-bit keys used for security and encryption.
The encryption key is derived from the link key used to authenticate the pairing devices. Also worthy of
note is the limited range and fast frequency hopping of the Bluetooth radios that makes long-distance
eavesdropping difficult.
Recommendations are:
• Perform pairing in a secure environment
• Keep PIN codes private and do not store the PIN codes in the device
• Implement application-level security.
Bluetooth Profiles
The device supports the Bluetooth services listed.
Wireless
Table 11 Bluetooth Profiles
Profile Description
Service Discovery Protocol
(SDP)
Serial Port Profile (SPP) Allows use of RFCOMM protocol to emulate serial cable
Object Push Profile (OPP) Allows the device to push and pull objects to and from a push
Advanced Audio Distribution
Profile (A2DP)
Audio/Video Remote Control
Profile (AVRCP)
Personal Area Network (PAN) Allows the use of Bluetooth Network Encapsulation Protocol to
Human Interface Device Profile
(HID)
Headset Profile (HSP) Allows a hands-free device, such as a Bluetooth headset, to place
Hands-Free Profile (HFP) Allows car hands-free kits to communicate with the device in the
Phone Book Access Profile
(PBAP)
Out of Band (OOB) Allows exchange of information used in the pairing process. Pairing
Handles the search for known and specific services as well as
general services.
connection between two Bluetooth peer devices. For example,
connecting the device to a printer.
server.
Allows the device to stream stereo-quality audio to a wireless
headset or wireless stereo speakers.
Allows the device to control A/V equipment to which a user has
access. It may be used in concert with A2DP.
provide L3 networking capabilities over a Bluetooth link. Only
PANU role is supported.
Allows Bluetooth keyboards, pointing devices, gaming devices and
remote monitoring devices to connect to the device.
and receive calls on the device.
car.
Allows exchange of Phone Book Objects between a car kit and a
mobile device to allow the car kit to display the name of the
incoming caller; allow the car kit to download the phone book so
you can initiate a call from the car display.
is completed using the Bluetooth radio, but requires information
from the OOB mechanism.
69
Table 11 Bluetooth Profiles (Continued)
Profile Description
Symbol Serial Interface (SSI) Allows for communication with Bluetooth Imager.
Generic Attribute Profile (GATT) Provides profile discovery and description services for Bluetooth
Dial Up Networking (DUN) Provides a standard to access the Internet and other dial-up
Generic Access Profile (GAP) Use for device discovery and authentication.
OBject EXchange (OBEX) Facilitates the exchange of binary objects between devices.
Bluetooth Power States
The Bluetooth radio is off by default.
• Suspend - When the device goes into suspend mode, the Bluetooth radio stays on.
• Airplane Mode - When the device is placed in Airplane Mode, the Bluetooth radio turns off. When
Airplane mode is disabled, the Bluetooth radio returns to the prior state. When in Airplane Mode, the
Bluetooth radio can be turned back on if desired.
Wireless
Low Energy protocol. It defines how attributes are grouped
together into sets to form services.
services over Bluetooth.
Bluetooth Radio Power
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (for example, an
airplane). When the radio is off, other Bluetooth devices cannot see or connect to the device. Turn on the
Bluetooth radio to exchange information with other Bluetooth devices (within range). Communicate only
with Bluetooth radios in close proximity.
NOTE: To achieve the best battery life, turn off radios when not in use.
Enabling Bluetooth
1. Swipe down from the Status bar to open the Notification panel.
2. Touch to turn Bluetooth on.
3. Press the Home button.
Disabling Bluetooth
1. Swipe down from the Status bar to open the Notification panel.
2. Touch to turn Bluetooth off.
3. Press the Home button.
Discovering Bluetooth Device(s)
The device can receive information from discovered devices without pairing. However, once paired, the
device and a paired device exchange information automatically when the Bluetooth radio is on.
1. Ensure that Bluetooth is enabled on both devices.
2. Ensure that the Bluetooth device to discover is in discoverable mode.
70
Ensure that the two devices are within 10 meters (32.8 feet) of one another.
3.
4. Swipe down from the Status bar to open the Quick Access panel.
5. Touch and hold Bluetooth.
6. Touch Pair new device. The device begins searching for discoverable Bluetooth devices in the area
and displays them under Available devices.
7. Scroll through the list and select a device. The Bluetooth pairing request dialog box appears.
8. Touch Pair on both devices.
9. The Bluetooth device is added to the Paired devices list and a trusted (“paired”) connection is
established.
Changing the Bluetooth Name
By default, the device has a generic Bluetooth name that is visible to other devices when connected.
1. Go to Settings.
2. Touch Connected devices > Connection preferences > Bluetooth.
3. If Bluetooth is not on, move the switch to turn Bluetooth on.
Wireless
4. Touch Device name.
5. Enter a name and touch RENAME.
6. Press the Home button.
Connecting to a Bluetooth Device
Once paired, connect to a Bluetooth device.
1. Go to Settings.
2. Touch Connected devices > Connection preferences > Bluetooth.
3. In the list, touch the unconnected Bluetooth device.
When connected, Connected appears below the device name.
Selecting Profiles on the Bluetooth Device
Some Bluetooth devices have multiple profiles.
1. Go to Settings.
2. Touch Connected devices > Connection preferences > Bluetooth.
3. In the Paired Devices list, touch next to the device name.
4. Turn on or off a profile to allow the device to use that profile.
5. Press the Home button.
Unpairing a Bluetooth Device
Unpairing a Bluetooth device erases all pairing information.
1. Go to Settings.
2. Touch Connected devices > Connection preferences > Bluetooth.
71
Cast
Wireless
3.
In the Paired Devices list, touch next to the device name.
4. Touch FORGET.
5. Press the Home button.
Use Cast to mirror the device screen on a Miracast enabled wireless display.
1. Go to Settings.
2. Touch Connected devices > Connection preferences > Cast.
3. Touch > Enable wireless display.
The device searches for nearby Miracast devices and lists them.
4. Touch a device to begin casting.
5. Press the Home button.
72
Accessories
This table lists the accessories available for the device.
Table 12 Accessories
Accessory Part Number Description
Cradles
2-Slot Charge Only
Cradle
10-Slot Charge Only
Cradle
10-Slot Charge Only
Locking Cradle
Cradle Mount BRKT-SCRD-SMRK-01 Mounts the 10-Slot Charge Only Cradle
Cradle Mount Plate BRKT-EC30-10SC1-01 Mounts the 10-Slot Charge Only Cradle
Locking Cradle Release
Tool
Charge and Communication Cables
USB-C Charging Cable CBL-TC2X-USBC-01 Provides device charging and USB
USB-C Charging Cable CBL-TC5X-USBC2A-01 Provides device charging and USB
Audio Accessories
Bluetooth Headset HS3100-OTH Rugged Bluetooth Headset. Includes
3.5 mm Headset HDST-35MM-PTT1-01 Use for PTT and VoIP calls.
CRD-EC30-2SCHG1-01 Provides device charging. Use with power
CRD-EC30-10SC1-01 Charges up to 10 devices. Use with power
CRD-EC30-10SLC1-01 Charges up to 10 devices. Use with power
KT-MC18-CKEY-20 Manually unlocks the EC30 from the
supply, p/n PWR-BGA12V50W0WW.
supply, p/n PWR-BGA12V108W0WW and
DC line cord, p/n CBL-DC-381A1-01.
supply, p/n PWR-BGA12V108W0WW and
DC line cord, p/n CBL-DC-381A1-01.
and 10-Slot Charge Only Locking Cradle to
a rack.
and 10-Slot Charge Only Locking Cradle to
a rack with the displays facing up.
10-Slot Charge Only Locking Cradle
(20-pack)
communication with a host computer.
communication with a host computer.
HS3100 Boom Module and HSX100 OTH
Headband Module.
73
Accessories
Table 12 Accessories (Continued)
Accessory Part Number Description
3.5 mm Headset
3.5 mm Quick
Disconnect Adapter
Cable
Carrying Solutions
Basic Lanyard SG-EC30-BLYD1-01 EC30 basic lanyard with adjustable neck
Basic Lanyard SG-EC30-BLYD1-10 EC30 basic lanyard with adjustable neck
Retractable Lanyard SG-EC30-RLYD1-01 EC30 retractable lanyard with magnetic
Retractable Lanyard SG-EC30-RLYD1-10 EC30 retractable lanyard with magnetic
Soft Holster SG-EC30-HLSTR1-01 EC30 soft holster.
Rigid Holster SG-EC30-RHLSTR1-01 EC30 rigid holster with rotating belt clip.
Garment Clip SG-EC30-CLIP1-01 EC30 vest/garment clip with coiled tether
Belt Clip SG-EC30-RCB1-01 EC30 retractor with magnetic recoil,
Arm Mount SG-EC30-ARM1-01 EC30 arm mount adapter (standard strap
Arm Mount SG-EC30-ARML1-01 EC30 arm mount adapter (long strap size).
Screen Protector SG-EC30-SCRNP1-05 Provides additional protection for the
Power Supplies
Power Supply PWR-BGA12V50W0WW Provides power to the 2–Slot cradle.
Power Supply PWR-BGA12V108W0WW Provides power to the 10-Slot Charge Only
Power Supply PWR-WUA5V12W0US Provides power to the EC30. Requires
HDST-35MM-PTVP-01
CBL-TC51-HDST35-01
Use headset for PTT and VoIP calls.
Adapter provides connection to the 3.5 mm
Headset.
strap and adapter (1-pack).
strap and adapter (10-pack).
recoil, adjustable neck strap, and adapter
(1-pack).
recoil, adjustable neck strap, and adapter
(10-pack).
and adapter.
carabiner, and adapter.
size).
screen (5-pack).
Requires DC Line Cord, p/n
CBL-DC-388A1-01 and country specific
three wire grounded AC line cord sold
separately.
cradle and the 10-Slot Locking Cradle.
Requires DC Line Cord, p/n
CBL-DC-381A1-01 and country specific
three wire grounded AC line cord sold
separately.
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with US
plug.
74
Accessories
Table 12 Accessories (Continued)
Accessory Part Number Description
Power Supply PWR-WUA5V12W0GB Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with Great
Britain plug.
Power Supply PWR-WUA5V12W0EU Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with
Europe plug.
Power Supply PWR-WUA5V12W0AU Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with
Australia plug.
Power Supply PWR-WUA5V12W0CN Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with
China plug.
Power Supply PWR-WUA5V12W0BR Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with Brazil
plug.
Power Supply PWR-WUA5V12W0KR Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with
Korea plug.
Power Supply PWR-WUA5V12W0IN Provides power to the EC30. Requires
USB-C Charging Cable. Power
Supply-100-240 VAC, 5 V, 2.5 A with India
plug.
DC Line Cord CBL-DC-388A1-01 Provides power from the power supply to
the 2-Slot cradle.
DC Line Cord CBL-DC-381A1-01 Provides power from the power supply to
the 10-Slot Charge Only Cradle and
10-Slot Locking Cradle.
75
Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device. See
Table 2 on page 17 for device charging status. The 1,200 mAh (typical) / 1,100 mAh (minimum) battery
charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in
approximately three hours.
NOTE: In most use cases the 90% charge provides plenty of charge for daily use. A full 100% charge can
last for approximately 10 hours of use depending on device settings.
To achieve the best fast charging results use only Zebra charging accessories. Charge device at room
temperature with the device in sleep mode.
Charging Status
The device’s Charging/Notification LED indicates the status of the battery charging in the device.
The 1,200 mAh (typical) / 1,100 mAh (minimum) battery charges from fully depleted to 90% in
approximately 2.5 hours, and from fully depleted to 100% in approximately three hours.
Charging Temperature
Accessories
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). The device or cradle always
performs battery charging in a safe and intelligent manner. At higher temperatures (for example,
approximately +37 °C (+98 °F)) the device or cradle may for small periods of time alternately enable and
disable battery charging to keep the battery at acceptable temperatures. The device and cradle indicates
when charging is disabled due to abnormal temperatures via its LED.
76
2-Slot Charge Only Cradle
The 2-Slot Charge Only Cradle:
• Provides 5 VDC power for operating the cradle.
• Simultaneously charges up to two devices.
Figure 19 2–Slot Charge Only Cradle
Accessories
Power LED
77
Setup
Accessories
Figure 20 2–Slot Charge Only Cradle
Charging the Device
To charge a device:
78
Accessories
Insert the device into the slot to begin charging.
1.
2. Ensure the device is seated properly.
79
10-Slot Charge Only Cradle
The 10-Slot Charge Only Cradle:
• Provides 5 VDC power for operating the cradle.
• Simultaneously charges up to ten devices.
Figure 21 10-Slot Charge Only Cradle
Accessories
Power LED
Setup
Figure 22 10-Slot Charge Only Cradle
Charging the Device
To charge a device:
80
Accessories
Insert the device into a slot to begin charging.
1.
2. Ensure the device is seated properly.
81
Accessories
10-Slot Locking Charge Only Cradle
NOTE: Controlling the locking cradle is done though a software API. For more information, go to
techdocs.zebra.com
The 10-Slot Locking Charge Only Cradle:
• Provides 5 VDC for operating the cradle.
• Simultaneously charges up to ten devices.
• Each slot contains an Indicator LED Insert with RGB LEDs.
Figure 23 10-Slot Locking Charge Only Cradle
.
Indicator LED Insert
Power LED
Setup
Figure 24 10-Slot Locking Charge Only Cradle
Charging the Device
To charge a device:
82
Accessories
Insert the device into a slot to begin charging.
1.
2. Ensure the device is seated properly.
Manual Release Using a Release Key
The EC30 10-Slot Locking Charge Only Cradle contains a locking mechanism that locks the EC30 inside
the cradle when docked. If the EC30 fails to unlock during normal operation, use a release key
(KT-MC18-CKEY-20) to unlock the EC30.
CAUTION: Do not use any device to unlock the cradle other than the tools described below. Failure to
comply could result in damage to the cradle and void the warranty.
To release a locked EC30:
1. Insert the release key straight into the slot as shown below.
2. While pressing the release key all the way into the slot, remove the EC30 from the cradle.
Figure 25 Manual Release of the EC30
Release Key
Release Key
Slot
83
Basic Lanyard
Use the basic lanyard to hold the EC30 around the neck for easy access.
1. Insert the top of the EC30 into the bottom of the adapter with the USB-C connector facing the release
latch.
2. Push the EC30 into the adapter until it securely snaps in place.
3. To adjust the length of the lanyard, press and hold the adjustment button and slide the button up or
down the string.
Figure 26 Basic Lanyard
Breakaway Snap
Accessories
Release Latch
Adapter
Adjustment Button
Device Removal
To remove the EC30 from the adapter, push the release tab and pull the bottom of the EC30 away from the
adapter.
Figure 27 Remove EC30 from Basic Lanyard
84
Retractable Lanyard
The retractable lanyard holds the EC30 around the neck and provides a retractable cord for easy access.
Magnetic fasteners hold the EC30 securely when not in use.
Figure 28 Retractable Lanyard
Breakaway Snap
Clip
Accessories
Magnetic Fasteners
Release Latch
Adjustment Button
Adapter
85
Accessories
Snap the end of the lanyard onto the adapter.
1.
2. Insert the top of the EC30 into the bottom of the adapter with the USB-C connector facing the release
latch.
3. Push the EC30 into the adapter until it securely snaps in place.
4. Use the clip to secure the retractable lanyard to clothing.
86
Accessories
To adjust the length of the lanyard, press and hold the adjustment button and slide the button up or down
the string.
Device Removal
To remove the EC30 from the adapter, push the release tab and pull the bottom of the EC30 away from the
adapter.
Figure 29 Remove EC30 from Retractable Lanyard
87
Soft Holster
Use the soft holster to securely hold the device on a belt for easy access.
Figure 30 Soft Holster
Accessories
88
Rigid Holster
Use the rigid holster to securely hold the device on a belt for easy access.
1. Insert of bottom of the EC30 into the bottom of the rigid holster.
2. Push the EC30 into the rigid holster until it securely snaps in place.
3. Rotate the device for the best viewing angle.
Accessories
Device Removal
To remove the EC30 from the rigid holster push the release latches up and pull the bottom of the EC30
away from the adapter.
89
Accessories
Figure 31 Remove EC30 from Rigid Holster
Release Latches
90
Belt Clip
Accessories
The belt clip holds the EC30 on a belt and provides a retractable cord for easy access. Magnetic fasteners
hold the EC30 securely when not in use.
Figure 32 Belt Clip
Carabiner
Magnetic Fasteners
Release Latch
Adapter
1. Insert the top of the EC30 into the bottom of the adapter with the USB-C connector facing the release
latch.
2. Push the EC30 into the adapter until it securely snaps in place.
91
Device Removal
To remove the EC30 from the adapter, push the release tab and pull the bottom of the EC30 away from the
adapter.
Figure 33 Remove EC30 from Belt Clip
Accessories
92
Garment Clip
Use the garment clip to tether the EC30 to a vest or other garment.
1. Insert the top of the EC30 into the bottom of the adapter with the USB-C connector facing the release
latch.
Accessories
Clip
Release Latch
Adapter
2. Push the EC30 into the adapter until it snaps into place.
3. Attach the clip to a vest or other garment.
Device Removal
To remove the EC30 from the adapter, push the release tab and pull the bottom of the EC30 away from the
adapter.
93
Figure 34 Remove EC30 from Garment Clip
Arm Mount
The Arm Mount allows the user to mount the EC30 onto the forearm for hands-free applications. Install the
mount on either arm with the release latch closer to the elbow.
Accessories
Figure 35 Arm Mount
Release Latch
Arm Mount Installation
To install the Arm Mount:
1. Loosen the strap.
Device Mount
94
Accessories
Slide the Arm Mount onto arm with the release latch closer to the elbow.
2.
3. Tighten the strap and press the hook and loop material together.
Figure 36 Tighten Strap
Device Installation
To install the EC30 onto the mount:
1. Insert the top of the EC30 into the bottom of the adapter with the USB-C connector facing the release
latch.
95
Push the EC30 into the adapter until it securely snaps in place.
2.
Device Removal
Accessories
To remove the EC30 from the adapter, push the release tab and pull the bottom of the EC30 away from the
adapter.
Figure 37 EC30 Removal
Release Lever
Strap Installation
The user can remove the strap for replacement or cleaning and then re-install a new strap.
1. Remove existing strap.
96
Accessories
Feed the ends of the strap through the slots with hook material positioned as shown below.
2.
Hook Material
3. Fold end over and press hook and loop material together.
10-Slot Cradle Rack Installation
Use the Rack/Wall Mount Bracket to mount a 10-slot cradle on a rack. When installing on a rack, first
assemble the bracket and cradles/chargers and then install the assembly on the rack.
1. Place the power supply in bottom tray.
2. Connect AC line cord to power supply.
3. Connect DC line cord to power supply.
4. Secure power supply and cables to bottom tray with tie wraps.
NOTE: Ensure tie wrap buckle is on side of power supply. Tie wrap buckle on top of power supply
interferes with the top tray.
5. Route cables through cable slots.
DC line Cord AC line CordPower Supply
97
Accessories
Secure four M2.5 studs to the top tray as shown.
6.
7. Align and install 10-Slot cradle onto studs of the top tray.
Studs (4)
8. Secure cradle to the top tray with two M2.5 safety screws.
Safety Screws(2)
98
Slide the top tray onto the bottom tray.
9.
10. Connect cables to the cradle.
Accessories
11. Secure top tray to the bottom tray with 4 M5 screws (two on each side).
See Rack Mount Installation on page 99 for installing the bracket assembly onto a rack.
Rack Mount Installation
NOTE: Use screws provided with rack system. Refer to rack user documentation for instructions.
99
Accessories
Secure mounting brackets to both sides of the top tray with four M5 screws (two on each side).
1.
Flange
Fifth Screw Hole
Figure 38 Flange 25° Position
Top Screw Hole
Flange
CAUTION: Install mounting bracket with 10-Slot cradle at a maximum height of four feet from the ground.
NOTE: Distance between two horizontal mounted brackets should be at least 14.5” apart (from top of one
flange to the top of the next flange).
Distance between two 25° mounted brackets should be at least 12” apart (from top of one flange to the top
of the next flange).
100
Loading...