Zebra cs3000 Quick Reference Manual

CS3000 Series

Quick Reference Guide

2 CS3000 Series

©2015 ZIH Corp and/or its affiliates. All rights reserved.
No part of this publication may be reproduced or used in any form, or by
any electrical or mechanical means, without permission in writing from
Zebra. This includes electronic or mechanical means, such as

photocopying, recordin g, or information storage and retrieval system s.
The material in this manual is subject to change without notice.
The software is provided strictly on an “as is” basis. All software,
including firmware, furnished to the user is on a licensed basis. Zebra
grants to the user a non-transferable and non-exclusive license to use
each software or firmware program delivered hereunder (licensed
program). Except as note d below, such license may not be assi gned,
sublicensed, or otherwise transferred by the user without prior written
consent of Zebra. No right to copy a licensed program in whole or in part
is granted, except as permitted under copyright law. The user shall not
modify, merge, or incorporate any form or portion of a licensed program
with other program material, create a derivative work from a licensed
program, or use a licensed program in a network without written
permission from Zebra. The user agrees to maintain Zebra’s copyright
notice on the licensed pr ograms delivered hereunder, and to include the
same on any authorized copie s it makes, in whole or in part. The user
agrees not to decompile, disassemble, decode, or reverse engineer any
licensed program delivered to the user or any portion thereof.

Zebra reserves the right to make changes to any software or product to
improve reliability, function, or design.

Zebra does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.

No license is granted, either expressly or by implication, estoppel, or
otherwise under any Zebra Technologies Corporation, intellectual
property rights. An i mplied license only exists for eq uipment, circuits, and
subsystems contained in Zebra products.

Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners.

Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows
and ActiveSync are either registered trademarks or trademarks of
Microsoft Corporation. All other product or service names are the
property of their respective owners.

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.

http://www.zebra.com

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty.

Quick Reference Guide 3

Mini-USB Port

Scan Button

LED

Bluetooth

Button/LED

Delete Button

Protective Cover

Introduction

The CS3000 Series scanner captures and stores
bar codes for a variety of uses, and transmits bar
code data to a host via USB connection or
Bluetooth.

This document provides basic instructions for
setting up, programming, and using the CS3000
series scanners. The scanner is available in the
following configurations:

• CS3000 - USB (batch), 0.5 GB Flash

• CS3070 - USB (batch) and Bluetooth,

0.5 GB Flash

Each scanner includes a USB host cable. A
charging cradle is also available for mounting,
charging, and host connection.

4 CS3000 Series

Charging

To charge the CS3000 series scanner, connect it
to a host PC via the USB host cable or charging
cradle. No power supply is necessary. Charge
time is approximately three hours for a fully
discharged battery.

Charging via USB Host Cable

1. Insert the mini-USB connector on the host
cable in the interface port on the scanner.

2. Connect the other end of the host cable to a
USB port on the host PC.

Quick Reference Guide 5

Charging via Charging Cradle

1. Insert the cradle’s USB connector into a USB
port on the host PC.

2. Remove the protective cover from the
scanner.

3. Place the scanner in the cradle, ensuring the
mini-USB connector in the cradle inserts into
the interface port on the scanner.

6 CS3000 Series

Connecting to a Host

Batch Connection

See Charging on page 4 for instructions on
connecting the scanner to a host PC via USB.

Note To enter batch scanning mode, the

scanner cannot be paired to a
Bluetooth host (applies to CS3070
model only).

Bluetooth Connection

Pairing

For RF-enabled scanners, to pair to a
Bluetooth-enabled host:

Note If the host does not support

Bluetooth communication, a
third-party Bluetooth adapter is
required.

1. Press the scan button (+) to wake the scanner.

2. Press and hold the Bluetooth button (round
button) for five seconds. The scanner beeps
and the Bluetooth button starts blinking quickly
to indicate that the scanner is discoverable by
the host.

3. On the host PC, launch the third party
Bluetooth pairing application and place the
application into discover Bluetooth device
mode.

4. Select the CS3070 from the discovered device
list. The Bluetooth application may prompt you
to scan a passkey it generated, or for you to
create and then scan a pin.

Quick Reference Guide 7

5. Scan Numeric Bar Codes on page 8
corresponding to the passkey, then scan Enter

on page 9.

The Bluetooth button blinks slowly to indicate that
the scanner paired with the host.

Note Bluetooth pairing suspends

temporarily while charging via a
USB cable. Disconnecting the cable
re-establishes the Bluetooth
pairing.

Unpairing

To unpair the scanner and host, press the
Bluetooth button. Upon unpairing, the Bluetooth
button stops blinking.

Note To enter batch scanning mode, the

scanner cannot be paired to a
Bluetooth host (applies to CS3070
model only).

8 CS3000 Series

Numeric Bar Codes

0

1

2

3

4

5

Quick Reference Guide 9

6

7

8

9

Enter