Zanussi ZWF 1021W User Manual

INSTRUCTION BOOKLET

WASHING MACHINE

ZWF 1021W ZWF 1221W

ZWF 1021

Washing

End

Half Load

Programme

Spin

Start/ Pause

Delay Start

12 H

8 H

4 H

2 H

Options

Prewash

Whites Economy

Whites

Coloured Economy Colour care Synthetics

Synthetics Synthetics Delicates Quick

95° 60° 40° 30° 60°

40° 30° 40°

Handwash Wool Wool Cold Miniprogram Rinses

Drain Spin Off Daily

30° 40°

30°/30

AQUACYCLE

6 kg

ESSENTIAL 1200ESSENTIAL

35.292.967/0

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washing machines. Please check your drum before use.

●

The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

●

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s reach.

Use

●

Always unplug the appliance and turn off the water supply after use.

●

Do not overload the appliance. See relevant section in the instruction book.

●

Always look through the glass door to check if water has drained before opening the door.

●

The user should always check that they have not left their gas lighter (disposable or otherwise) in their clothing.

●

Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine Zanussi spare parts.

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Contents

For the User

Important Safety Information

Your New Washing Machine

Description of the Appliance

Detergent dispenser drawer 5

The Control Panel

6-7

Programme information 8

Operating Sequence

9-12

Washing 5 kg of white cotton at 95°C 9 Load the laundry 9 Measure out the detergent and the fabric softener 9 Select the required programme 9 Select the spin speed or

option “RINSE HOLD” or “NO SPIN” 9 Select the required option 10 Select the delay start 10 Start the machine 10 Altering a programme 10 Interrupting a programme 10 Cancelling a programme 10 Opening the door after the programme has started 10 At the end of the programme 10 Washing 2.5 kg of mixed fabrics at 40°C 11 Load the laundry 11 Measure out the detergent and the fabric softener 11 Select the required programme 11 Select the spin speed or

option “RINSE HOLD” or “NO SPIN” 11 Select the required option(s) 11 Start the machine 11 At the end of the programme 12

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Washing Hints

13-14

Which detergent?.... 14

And in which form? 14

Wash Care Symbols

Washing Programmes

16-17

Maintenance and Cleaning

18-19 Descaling 18 After each wash 18 Maintenance Wash 18 External cleaning 18 Cleaning the dispenser drawer 18 Cleaning the drawer recess 18 Cleaning the pump 18-19 Cleaning the water inlet filter 19 The dangers of freezing 19 Emergency emptying out 19

Something Not Working

20-21

Service and Spare Parts

Guarantee Conditions

For the Installer

Installation Instructions

Technical Specifications

23 Unpacking 24 Positioning 24 Water inlet 24-25 Water drainage 25-26 Levelling 26 Special conditions 26 In the interest of the environment 26-27 Electrical connection 27

Your New Washing Machine

Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

●

The programme selector dial combines the function of programme and temperature selection, making it easier to set the programme.

●

The programme progress display shows the delay start, the functioning of the machine and the end of the programme .

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The ECO VALVE allows total use of detergent and reduces water consumption so saving energy.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.

●

A programme without prewash is sufficient for normally soiled laundry.

●

The machine works more economically if it is fully loaded.

●

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature, so saving energy.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".

Description of the Appliance

1Detergent dispenser drawer 2 Programme guide 3 Control panel 4 Door opening handle 5 Drain pump 6 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

95°

30°

Handwash

Whites

40°

60°

Whites Economy

Wool

40°

Wool Cold

Coloured Economy

30°/30

30°

Miniprogram

Colour care

Rinses

60°

Synthetics

40°

Drain

Synthetics

30°

Synthetics

Spin

40°

Delicates

Off

Daily

Quick

ESSENTIAL 1200ESSENTIAL

AQUACYCLE

Programme

Spin

ZWF 1021

12 H

8 H

Start/

Delay

Half

Pre-

4 H

Options

Pause

Start

Load

wash

2 H

Washing

End

6 kg

C0069

1 Detergent dispenser drawer Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the Start/Pause button. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out. If an incorrect option is selected, the corresponding pilot light flashes for about 2 seconds.

2 “Options” button

By depressing this button you can select two different options:

●

DAILY: to be used for lightly soiled cotton or

synthetic items in order to obtain good washing

performance in a short time.

●

QUICK: a very short cycle for cotton,

synthetic or delicate items that have been used or

worn for a short time.

These options cannot be used with the Economy programme 60E and E40.

The light corresponding to the selected option illuminates. If an option is chosen that is not allowed with the selected programme, both lights will flash 3 times. Max. recommended load 3.5 kg.

2 “Prewash” button

Select this option if you wish your laundry to be prewashed before the main wash (not available for wool, handwash and Miniprogram).

The Control Panel

The prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

3 “Half Load” button

Select this button to reduce water consumption on the rinse phase when washing a smaller load of cottons or linens (maximum load size = 2.5 kg). The machine will perform 2 rinses instead of 3.

This function is not available on all programmes. If the corresponding pilot light flashes, this indicates that this option is not available.

5 “Start / Pause” button

After having selected the required programme, press this button to start the machine; the corresponding pilot light stops flashing.

To interrupt a programme which is running, depress the Start/Pause button: the corresponding pilot light starts to flash.

To restart the programme from the point at which it was interrupted, press the Start/Pause button again.

6 “Delay Start” button

This button makes it possible to delay the starting of the washing programme by 12, 8, 4 and 2 hours. The delay you have selected is indicated by the illumination of the corresponding light. The machine begins the countdown after depressing START/PAUSE button.

You must select this option after you have set the programme and before you press the Start/Pause button. You can cancel the delay time at any moment, before

you press the Start/Pause button. If you have already pressed the Start/Pause button,

and you wish to cancel the delay time, proceed as follows:

ZWF 1021

Washing

End

Half Load

Spin

Start/ Pause

Delay Start

12 H

8 H

4 H

2 H

Options

Prewash

Programme

Whites Economy

Whites

Coloured Economy

Colour care

Synthetics

Synthetics Delicates

Quick

95°

60°

40°

30°

60°

40°

30°

40°

Handwash Wool

Wool Cold

Miniprogram

Rinses

Drain

Spin Off

Daily

30°

40°

30°/30

6 kg

ESSENTIAL 1000

AQUACYCLE

ESSENTIAL

1 2345 6 7 8 9

ZWF 1021W

• set the washing machine to PAUSE by pressing the

Start/Pause button;

• press the Delay Start button once, the light relevant to

the selected delay goes off .

• press the Start/Pause button again to start the

programme.

Important!

●

The selected delay can be changed only after selecting the washing programme again.

●

The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the Start/Pause button. Wait 2 or 3 minutes before opening the door. After you have closed the door, press the Start/Pause button again.

The delay start can not be selected with Spin and Drain programmes.

7 Programme progress display

When you choose the delayed start, the light relevant to the selected delay lights up.

After the machine has started, the remaining time is shown by the corresponding indicator light.

At the beginning of the programme, only the “Washing” light stays on. When the programme has finished, the “End” pilot light comes on.

The “End” light flashes in the event of operating problems:

●

4 flashes: door open

●

2 flashes: problem with water draining

●

1 flash: problem with water supply

For more information see paragraph “Something not working”?

8 Spin speed selector dial

This dial allows you to reduce the final and the intermediate spin speeds or to select the NO SPIN or RINSE HOLD (anti-crease) option.

8 H

4 H

2 H

Washing

End

The speeds on the dial refer to cotton programmes.

Position 1000 (or 1200) corresponds to 900 r.p.m. for synthetics, wool and handwash and 700 r.p.m. for delicates. Position 500 corresponds to 450 r.p.m. for delicates and 500 r.p.m. for synthetics, wool and handwash.

●

NO SPIN: by selecting this option all the spinning phases are suppressed. To be used for extremely delicate items. The machine will add 3 rinses on cotton programmes and 1 rinse on synthetic programmes.

●

RINSE HOLD (anti-crease): by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the phase light “End” is on and the door is blocked to indicate that the water must be emptied out.

To do this:

●

turn the programme selector dial to “O”

●

select the Drain or Spin programme. Using the spin speed selector dial you can choose the desired spin. If the dial remains on position RINSE HOLD or NO SPIN the machine will perform the spin speed at 400 rpm.

●

depress Start/Pause button.

9 Programme selector dial

The selector dial is divided into following sections:

●

COTTON and linen

●

SYNTHETIC

●

DELICATE

●

WOOL

●

Miniprogram

●

Special programmes:

(Spin)

Programme

and Handwash

(Rinses), (Drain) and

The selector dial can be turned either clockwise or anticlockwise.

Separate spin for hand washed garments and after programmes with RINSE HOLD option. Before selecting this programme the selector dial must be turned to “O”. You can choose the speed by means of the relevant selector dial to adapt it to the fabrics to be spun.

This is a complete programme to be used for lightly soiled laundry or for laundry which needs freshening up.

Max load: 2. kg. Washing temperature: 30°C Number of rinses: 2 . Programme duration: 30 minutes. Short spin at 700 r.p.m max.

Particularly delicate washing suitable for articles of clothing whose label indicates that they must be handwashed .

Handwash 30°

Miniprogram

Spin

Position 60E and E40 corresponds to the ENERGY SAVING programme for cotton, position to cold wash and position O to Reset programme/Switching OFF of the machine.

At the end of the programme the selector dial must be turned to position O, to switch the machine off.

ATTENTION!

If you turn the programme selector dial to another programme when the machine is working, the lights of the programme progress display start to flash. The machine will not perform the new selected programme.

Programme information

The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M9604.

With this programme it is possible to rinse and spin garments which have been washed by hand. The machine performs 3 rinses, followed by a final short spin at the speed selected by means of the relevant dial.

For emptying out the water of the last rinse in programmes with the RINSE HOLD option. Turn first the programme selector dial to O, then select Drain programme and depress the Start/Pause button.

Drain

Rinses

Wool

Operating Sequence

Before the first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

WASHING 5 KG OF WHITE COTTON AT 95°C

Suppose you have 5 kg of heavy soiled laundry to wash. It is white cotton and is suitable for high temperature washing.

1. Load the laundry

Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.

2. Measure out the detergent and the fabric softener

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment and, if you wish to carry out the prewash phase, pour it into the compartment marked . If required, pour fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.

3. Select the required programme

Turn the programme selector dial to the 95 programme. The light Start/Pause starts to flash

The pilot lights corresponding to the various phases making up the programme come on.

4. Select the spin speed or

option RINSE HOLD or NO SPIN

Turn the selector dial to the required position.

ZWF 1021W ZWF 1220W

5. Select the required option(s)

Select

Daily , Quick or Prewash option,

required, the corresponding light illuminates.

P0004

Programme

Spin

C0064

C0065

Half

Pre-

wash

Load

Options

+ 19 hidden pages