Zanussi ZTR 56 RL, ZTR 56 RN User Manual

REFRIGERATOR
ZTR 56 RL
ZTR 56 RN
2222611-39
INSTRUCTION BOOKLET
2
Instructions for the user
Before use 4 Setting the temperature 4 Fresh food refrigeration 5 The door shelves 5 Normal Operating Sounds 5
Health and Safety Guidelines 6
Defrosting 6 Maintenance and Cleaning 7
Internal cleaning 7 External cleaning 7 Changing the light bulb 7 When the appliance is not in use 7
Something Not Working? 8 Service and Spare Parts 9 Customer Care Department 9 Zanussi Service Force 10 Guarantee Conditions 12
Instructions for the installer
Technical Specifications 13 Installation 13
Positioning 13 Door reversal 14
Electrical Connection 15
CONTENTS
General Safety
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians.
Take utmost care when handling your
appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.
The appliance must not be located close to
radiators or boilers.
Avoid prolonged exposure of the appliance to
direct sunlight.
Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating appliances.
During Use
This appliance is designed for domestic use only,
specifically for the storage of edible foodstuffs only. It is not intended for commercial or industrial use.
Containers with flammable gases or liquids can
leak at low temperatures. Do not store any containers with flammable materials, such as spray cans, fire extinguisher refill cartridges etc. in the refrigerator.
Maintenance and Cleaning
Before cleaning, always switch off the appliance
and disconnect from the electrical supply.
When unplugging always pull the plug from the
mains socket, do not pull on the cable.
Servicing
This product should be serviced by an authorised
engineer and only genuine spare parts should be used.
Under no circumstances should you attempt to
repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre.
At the end of the Appliance Life
When disposing of your appliance use an
authorised disposal site.
Remove the plug and ensure that any locks or
catches are removed, to prevent young children being trapped inside.
3
IMPORTANT SAFETY INSTRUCTIONS
Prior to Installation
Check the appliance for transport damage. Under
no circumstance should a damaged appliance be installed. In the event of damage please contact your retailer.
Installation
This appliance is heavy. Care should be taken
when moving it.
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Ensure that the appliance does not stand on the
electrical supply cable. Important: If the supply cable is damaged, it must be replaced by a cable available from your local Service Force Centre.
Any electrical work required to install this
appliance should be carried out by a qualified electrician or competent person.
Parts which heat up should not be exposed.
Whenever possible, the back of the appliance should be close to a wall, but leaving the required distance for ventilation, as stated in the installation instructions.
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow the refrigerant to settle.
Refrigerant
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibly, which is nevertheless flammable.
During transportation and installation of the
appliance, be certain that none of the components of the refrigerant circuit become damaged.
If the refrigerant circuit should become damaged:
- avoid open flames and sources of ignition.
- thoroughly ventilate the room in which the appliance is situated.
Child Safety
Do not allow children to tamper with the controls
or play with the product.
There is a risk of suffocation! Keep packaging
material away from children!
These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department.
4
DESCRIPTION OF THE APPLIANCE
OPERATION
Dairy compartment
Can storage shelf with egg tray
Bottle storage shelf
Salad drawers
Glass shelf (for storing fresh
meat)
Storage shelves (one with flap)
Thermostat control
Before use
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly.
Setting the temperature
The temperature inside the refrigerator is regulated by a thermostat with 6 temperature positions and one «OFF» (O) position.
Position 1 = minimum coldness Position 6 = maximum coldness
Turn the thermostat dial to the required position. An intermediate position is usually the most suitable,
although the temperature will be affected by:
l
Room temperature
l
How often the door is opened
l
How much food is stored
l
Position of the appliance
In determining the correct temperature control setting all these factors have to be considered and some experimentation may be necessary.
When altering the temperature setting, allow 24 hours for the temperature to stablise before making further changes.
Important During prolonged periods of abnormally
hot weather, if the thermostat is set on too high a number, the cooling system may operate continuously and the fridge cooling plate may not defrost. Turning the knob to a lower number will cause the automatic defrosting to resume.
5
Fresh food refrigeration
To obtain the best performance, do not store warm food or evaporating liquids in the refrigerator; do cover or wrap the food, particularly if it has a strong flavour. Do not cover the shelves with any protective material, such as paper, cardboard or plastic, which may obstruct the air circulation through them. To help you use your refrigerator correctly, here are some more useful hints: Raw meat (beef, pork, lamb & chicken or poultry): wrap in polythene bags and place on top of the salad drawers.
Meat can only be stored safely in this way for one or two days at the most.
Fruit & vegetables: these should be thoroughly
cleaned and placed in the bottom salad drawers. Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible.
Milk bottles: these should have a cap and should be stored in the bottle rack on the door.
The walls of the refrigerator are equipped with runners so that shelves can be positioned as desired.
The door shelves
To permit storage of food packages of various sizes, the central door shelf can be adjusted in height. To do this proceed as in the figure. The top shelf lid can be removed for easier cleaning.
Normal Operating Sounds
You may hear faint gurgling or bubbling sounds when the refrigerant is pumped through the coils or tubing at the rear, to the cooling plate.
When the compressor is on, the refrigerant is being pumped round, and you will hear a whirring sound or pulsating noise from the compressor.
A thermostat controls the compressor, and you will hear a faint ‘click’ when the thermostat cuts in and out.
D040
D758
Loading...
+ 11 hidden pages