YEALINK W80B User Manual

DECT IP Multi-Cell Base Station

W80B

Quick Start Guide(V83.10)

www.yealink.com For W80B firmware 103.83.0.10 or later

For W53H firmware 88.83.0.20 or later
For W56H firmware 61.83.0.20 or later

Package Contents

+

2

+

2

W80B Base Station

Installation

Packaging Contents

Expansion Screws

Quick Start Guide

1. Connect the power and the network using method a or method b.

a. AC Power Option b. PoE (Power over Ethernet) Option

Note:

If you choose method a, use Yealink supplied power adapter (5V/1.2A).
A third-party power adapter may damage the base station.
If you choose method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.

2. Mount W80B on the wall or on the ceiling.

Power Adapter

(Optional)

IEEE 802.3af compliant
PoE Hub/Switch

Max:4.5mm
(0.177”)

59mm

MAC

SN

30 mm

25 mm

Max:8mm
(0.315”)

Min:6.5mm
(0.256”)

Max:3mm
(0.118”)

MAC

SN

A

SN

MAC

B

59mm

59mm

Wall-Mount Installation

1