Yealink SIP-T46G, SIP-T42G, SIP-T41G Quick Installation Manual

Wall Mount Quick Installation Guide

for SIP-T4x IP Phones

This quick installation guide provides step-by-step
instructions for mounting your IP phone to a wall.

SIP-T46G IP Phone
SIP-T42G IP Phone
SIP-T41P IP Phone

www.yealink.comCopyright 2013 YEALINK NETWORK TECHNOLOGY CO.,LTD.

c

The wall mount bracket is required for wall mount
installation, which is not included with your IP phone,
contact your reseller to purchase it separately.

Wall mount is avaliable for the following IP phones:

Packaging Contents

The following items are included in your package. If you
find anything missing, contact your system administrator.
(Purchase the proper package according to the IP phone
model you own.)

Following the drilling template above, you can mount
the IP phone to the wall, as shown below
(Take a SIP-T46G IP phone as an example):

For a SIP-T42G/T41P IP phone:

102.5mm

73.5mm

46mm

Screw position

x 3

Max:4.5mm
(0.177”)

Min:6.5mm
(0.256”)

Min:6.5mm
(0.256”)

You can also download the wall mount drilling template
online: http://www.yealink.com/Support.aspx.

Avaliable for a SIP-T46G IP phone:

Wall Mount Bracket Quick Installation Guide

www.yealink.comWall Mount Quick Installation Guide

Attaching the Wall Mount Bracket

1. Insert the tabs on the wall mount bracket into the
slots on the back of IP phone.

Attach the wall mount bracket, as shown below

(Take a SIP-T46G IP phone as an example):

2. Slide the wall mount bracket to right.

To attach the wall mount bracket:

Avaliable for a SIP-T42G/T41P IP phone:

Wall Mount Bracket Quick Installation Guide

Adjusting the Hookswitch Tab

The IP phone is packaged with the hookswitch tab in
desk mount position. Before mounting the IP phone to
a wall, you must set the hookswitch tab to wall mount
position.

Adjust the hookswitch tab, as shown below:

1. Pull the hookswitch tab in the handset cradle.

2. Rotate the hookswitch tab 180 degrees.

3. Reinsert the hookswitch tab.
The hookswitch tab has a lip which allows the handset to

stay on-hook when the IP phone is mounted vertically.

To adjust the hookswitch tab:

For a SIP-T46G IP phone:

126.6mm

86.9mm

x 4

Screw position

Max:8mm
(0.315”)
Min:6.5mm
(0.256”)

Max:4.5mm
(0.177”)

Mounting the Wall Mount Bracket

Yealink provides the wall mount drilling template for each
IP phone model, which locates and marks the position for
mounting the screws (not provided) on the wall, as shown
below:

Wall anchors and appliable tools not included with your
package are also required for wall mount installation.