Yealink SIP-T29, SIP-T27, SIP-T4X Wall Mount Quick Installation Manual

Wall Mount Quick Installation Guide

for SIP-T29_T27_T4X IP Phones

This quick installation guide provides step-by-step
instructions for mounting your IP phone to a wall.

www.yealink.com

The wall mount bracket is required for wall mount
installation, which is not included with your IP phone,
contact your reseller to purchase it separately.

Wall mount is avaliable for the following IP phones:

The following items are included in your package. If
you find anything missing, contact your system
administrator. (Purchase the proper package according
to the IP phone model you own.)

SIP-T48S/T48G IP Phone

Quick Installation Guide

Quick Installation Guide

Quick Installation Guide

Wall Mount Quick Installation Guide

Avaliable for a SIP-T42S/T42G/T41S/T41P/T40P IP phone:

Wall Mount Bracket

Wall anchors and appliable tools not included in your
package are also required for wall mount installation.

Avaliable for a SIP-T46S/T46G IP phone:

Wall Mount Bracket

Avaliable for a SIP-T48S/T48G IP phone:

Wall Mount Bracket

SIP-T46S/T46G IP Phone
SIP-T42S/T42G IP Phone

SIP-T41S/T41P IP Phone

SIP-T29G IP Phone

Avaliable for a SIP-T29G/T27P/T27G IP phone:

Quick Installation Guide

SIP-T27P/T27G IP Phone

Wall Mount Bracket

SIP-T40P IP Phone

Packaging Contents

For a SIP-T48S/T48G/T29G/T27P/T27G IP phone:

2. Insert the tabs on the wall mount bracket into the
slots on the back of IP phone. And then slide the wall
mount bracket to right.

PUSH

For SIP-T46S/T46G/T42S/T42G/T41S/T41P/T40P IP phones:

Wall Mount Quick Installation Guide

www.yealink.com

1. Pull the hookswitch tab in the handset cradle.

2. Rotate the hookswitch tab 180 degrees.

3. Reinsert the hookswitch tab.

The hookswitch tab has a lip which allows the handset
to stay on-hook when the IP phone is mounted vertically.

To adjust the hookswitch tab:

Adjust the hookswitch tab as shown below(Take a
SIP-T46G IP phone as an example):

WALL WALL

The IP phone is packaged with the hookswitch tab in desk
mount position. Before mounting the IP phone toa wall, you
must set the hookswitch tab to wall mount position.

To attach the wall mount bracket:

1.Pull silica gels out of the two wall mount slots. (Only for
the SIP-T48S/T48G IP Phone )

Yealink provides the wall mount drilling template for
each IP phone model, which locates and marks the
position for mounting the screws (not provided) on the

Adjusting the Hookswitch Tab

Attaching the Wall Mount Bracket

Mounting the Wall Mount Bracket